Forkchoice Ethereum Mainnet

/**
 *Submitted for verification at Etherscan.io on 2021-03-11
*/

/*
                                                           ,▄▓▓██▌   ,╓▄▄▓▓▓▓▓▓▓▓▄▄▄,,                          
                                                        ,▓██▓███▓▄▓███▓╬╬╬╬╬╬╬╬╬╬╬╬╬▓███▓▄,                     
                                                  ▄█   ▓██╬╣███████╬▓▀╬╬▓▓▓████████████▓█████▄,                 
                                                 ▓██▌ ▓██╬╣██████╬▓▌  ██████████████████████▌╙╙▀ⁿ
                                                ▐████████╬▓████▓▓█╨ ▄ ╟█████████▓▓╬╬╬╬╬▓▓█████▓▄
                                  └▀▓▓▄╓        ╟█▓╣█████▓██████▀ ╓█▌ ███████▓▓▓▓▓╬╬╬╬╬╬╬╬╬╬╬╬▓██▓▄
                                     └▀████▓▄╥  ▐██╬╬██████████╙ Æ▀─ ▓███▀╚╠╬╩▀▀███████▓▓╬╬╬╬╬╬╬╬╬██▄
                                        └▀██▓▀▀█████▓╬▓██████▀     ▄█████▒╠"      └╙▓██████▓╬╬╬╬╬╬╬╬██▄
                                           └▀██▄,└╙▀▀████▌└╙    ^"▀╙╙╙"╙██      @▄    ╙▀███████╬╬╬╬╬╬╬██µ
                                              └▀██▓▄, ██▌       ╒       ╙█▓     ]▓█▓╔    ▀███████▓╬╬╬╬╬▓█▌
                                                  ▀█████       ▓         ╟█▌    ]╠██▓░▒╓   ▀████████╬╬╬╬╣█▌
                                                  ▐████      ╓█▀█▌      ,██▌    ╚Å███▓▒▒╠╓  ╙█████████╬╬╬╣█▌
                                                  └████     ▓█░░▓█      ▀▀▀    φ▒╫████▒▒▒▒╠╓  █████████▓╬╬▓█µ
                                                   ╘███µ ▌▄█▓▄▓▀`     ,▀    ,╔╠░▓██████▌╠▒▒▒φ  ██████████╬╬██
                                                   ▐████µ╙▓▀`     ,▀╙,╔╔φφφ╠░▄▓███████▌░▓╙▒▒▒╠ └██╬███████╬▓█⌐
                                                   ╫██ ▓▌         ▌φ▒▒░▓██████████████▌▒░▓╚▒▒▒╠ ▓██╬▓██████╣█▌
                                                   ██▌           ▌╔▒▒▄████████████████▒▒▒░▌╠▒▒▒≥▐██▓╬╬███████▌
                                                   ██▌      ,╓φ╠▓«▒▒▓████▀  ▀█████████▌▒▒▒╟░▒▒▒▒▐███╬╬╣████▓█▌
                                                  ▐██      ╠▒▄▓▓███▓████└     ▀████████▌▒▒░▌╚▒▒▒▐███▓╬╬████ ╙▌
                                                  ███  )  ╠▒░░░▒░╬████▀        └████████░▒▒░╬∩▒▒▓████╬╬╣███
                                                 ▓██    ╠╠▒▒▐█▀▀▌`░╫██           ███████▒▒▒▒░▒▒½█████╬╬╣███
                                                ███ ,█▄ ╠▒▒▒╫▌,▄▀,▒╫██           ╟██████▒▒▒░╣⌠▒▓█████╬╬╣██▌
                                               ╘██µ ██` ╠▒▒░██╬φ╠▄▓██`            ██████░░▌φ╠░▓█████▓╬╬▓██
                                                ╟██  .φ╠▒░▄█▀░░▄██▀└              █████▌▒╣φ▒░▓██████╬╬╣██
                                                 ▀██▄▄▄╓▄███████▀                ▐█████░▓φ▒▄███████▓╬╣██
                                                   ╙▀▀▀██▀└                      ████▓▄▀φ▄▓████████╬▓█▀
                                                                                ▓███╬╩╔╣██████████▓██└
                                                                              ╓████▀▄▓████████▀████▀
                                                                            ,▓███████████████─]██╙
                                                                         ,▄▓██████████████▀└  ╙
                                                                    ,╓▄▓███████████████▀╙
                                                             `"▀▀▀████████▀▀▀▀`▄███▀▀└
                                                                              └└
                                
                    

                    11\   11\                     11\             11\   11\            11\                                       11\       
                  1111 |  \__|                    11 |            111\  11 |           11 |                                      11 |      
                  \_11 |  11\ 1111111\   1111111\ 1111111\        1111\ 11 | 111111\ 111111\   11\  11\  11\  111111\   111111\  11 |  11\ 
                    11 |  11 |11  __11\ 11  _____|11  __11\       11 11\11 |11  __11\\_11  _|  11 | 11 | 11 |11  __11\ 11  __11\ 11 | 11  |
                    11 |  11 |11 |  11 |11 /      11 |  11 |      11 \1111 |11111111 | 11 |    11 | 11 | 11 |11 /  11 |11 |  \__|111111  / 
                    11 |  11 |11 |  11 |11 |      11 |  11 |      11 |\111 |11   ____| 11 |11\ 11 | 11 | 11 |11 |  11 |11 |      11  _11<  
                  111111\ 11 |11 |  11 |\1111111\ 11 |  11 |      11 | \11 |\1111111\  \1111  |\11111\1111  |\111111  |11 |      11 | \11\ 
                  \______|\__|\__|  \__| \_______|\__|  \__|      \__|  \__| \_______|  \____/  \_____\____/  \______/ \__|      \__|  \__|
                                                                                                                                           
                                                                                                                                           
                                                                                                                                           
                               111111\                                                               11\     11\                           
                              11  __11\                                                              11 |    \__|                          
                              11 /  11 | 111111\   111111\   111111\   111111\   111111\   111111\ 111111\   11\  111111\  1111111\        
                              11111111 |11  __11\ 11  __11\ 11  __11\ 11  __11\ 11  __11\  \____11\\_11  _|  11 |11  __11\ 11  __11\       
                              11  __11 |11 /  11 |11 /  11 |11 |  \__|11111111 |11 /  11 | 1111111 | 11 |    11 |11 /  11 |11 |  11 |      
                              11 |  11 |11 |  11 |11 |  11 |11 |      11   ____|11 |  11 |11  __11 | 11 |11\ 11 |11 |  11 |11 |  11 |      
                              11 |  11 |\1111111 |\1111111 |11 |      \1111111\ \1111111 |\1111111 | \1111  |11 |\111111  |11 |  11 |      
                              \__|  \__| \____11 | \____11 |\__|       \_______| \____11 | \_______|  \____/ \__| \______/ \__|  \__|      
                                        11\   11 |11\   11 |                    11\   11 |                                                 
                                        \111111  |\111111  |                    \111111  |                                                 
                                         \______/  \______/                      \______/                                                  
                                                1111111\                        11\                                                        
                                                11  __11\                       11 |                                                       
                                                11 |  11 | 111111\  11\   11\ 111111\    111111\   111111\                                 
                                                1111111  |11  __11\ 11 |  11 |\_11  _|  11  __11\ 11  __11\                                
                                                11  __11< 11 /  11 |11 |  11 |  11 |    11111111 |11 |  \__|                               
                                                11 |  11 |11 |  11 |11 |  11 |  11 |11\ 11   ____|11 |                                     
                                                11 |  11 |\111111  |\111111  |  \1111  |\1111111\ 11 |                                     
                                                \__|  \__| \______/  \______/    \____/  \_______|\__|                                     
*/

// File @openzeppelin/contracts/utils/[email protected]

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}


// File @openzeppelin/contracts/access/[email protected]



pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}


// File @openzeppelin/contracts/token/ERC20/[email protected]



pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}


// File @openzeppelin/contracts/math/[email protected]



pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}


// File @openzeppelin/contracts/utils/[email protected]



pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}


// File @openzeppelin/contracts/token/ERC20/[email protected]



pragma solidity >=0.6.0 <0.8.0;



/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}


// File contracts/helpers/UniERC20.sol



pragma solidity ^0.6.12;


library UniERC20 {
    using SafeMath for uint256;

    IERC20 private constant _ETH_ADDRESS = IERC20(0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE);
    IERC20 private constant _ZERO_ADDRESS = IERC20(0);

    function isETH(IERC20 token) internal pure returns (bool) {
        return (token == _ZERO_ADDRESS || token == _ETH_ADDRESS);
    }

    function uniBalanceOf(IERC20 token, address account) internal view returns (uint256) {
        if (isETH(token)) {
            return account.balance;
        } else {
            return token.balanceOf(account);
        }
    }

    function uniTransfer(IERC20 token, address payable to, uint256 amount) internal {
        if (amount > 0) {
            if (isETH(token)) {
                to.transfer(amount);
            } else {
                _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, amount));
            }
        }
    }

    function uniApprove(IERC20 token, address to, uint256 amount) internal {
        require(!isETH(token), "Approve called on ETH");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = address(token).call(abi.encodeWithSelector(token.approve.selector, to, amount));

        if (!success || (returndata.length > 0 && !abi.decode(returndata, (bool)))) {
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, to, 0));
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, to, amount));
        }
    }

    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = address(token).call(data);
        require(success, "low-level call failed");

        if (returndata.length > 0) { // Return data is optional
            require(abi.decode(returndata, (bool)), "ERC20 operation did not succeed");
        }
    }
}


// File contracts/interfaces/IChi.sol



pragma solidity ^0.6.12;

interface IChi is IERC20 {
    function mint(uint256 value) external;
    function free(uint256 value) external returns (uint256 freed);
    function freeFromUpTo(address from, uint256 value) external returns (uint256 freed);
}


// File contracts/interfaces/IGasDiscountExtension.sol



pragma solidity ^0.6.12;

interface IGasDiscountExtension {
    function calculateGas(uint256 gasUsed, uint256 flags, uint256 calldataLength) external view returns (IChi, uint256);
}


// File contracts/interfaces/IAggregationExecutor.sol



pragma solidity ^0.6.12;

interface IAggregationExecutor is IGasDiscountExtension {
    function callBytes(bytes calldata data) external payable;  // 0xd9c45357
}


// File contracts/helpers/RevertReasonParser.sol



pragma solidity ^0.6.12;


library RevertReasonParser {
    function parse(bytes memory data, string memory prefix) internal pure returns (string memory) {
        // https://solidity.readthedocs.io/en/latest/control-structures.html#revert
        // We assume that revert reason is abi-encoded as Error(string)

        // 68 = 4-byte selector 0x08c379a0 + 32 bytes offset + 32 bytes length
        if (data.length >= 68 && data[0] == "\x08" && data[1] == "\xc3" && data[2] == "\x79" && data[3] == "\xa0") {
            string memory reason;
            // solhint-disable no-inline-assembly
            assembly {
                // 68 = 32 bytes data length + 4-byte selector + 32 bytes offset
                reason := add(data, 68)
            }
            /*
                revert reason is padded up to 32 bytes with ABI encoder: Error(string)
                also sometimes there is extra 32 bytes of zeros padded in the end:
                https://github.com/ethereum/solidity/issues/10170
                because of that we can't check for equality and instead check
                that string length + extra 68 bytes is less than overall data length
            */
            require(data.length >= 68 + bytes(reason).length, "Invalid revert reason");
            return string(abi.encodePacked(prefix, "Error(", reason, ")"));
        }
        // 36 = 4-byte selector 0x4e487b71 + 32 bytes integer
        else if (data.length == 36 && data[0] == "\x4e" && data[1] == "\x48" && data[2] == "\x7b" && data[3] == "\x71") {
            uint256 code;
            // solhint-disable no-inline-assembly
            assembly {
                // 36 = 32 bytes data length + 4-byte selector
                code := mload(add(data, 36))
            }
            return string(abi.encodePacked(prefix, "Panic(", _toHex(code), ")"));
        }

        return string(abi.encodePacked(prefix, "Unknown(", _toHex(data), ")"));
    }

    function _toHex(uint256 value) private pure returns(string memory) {
        return _toHex(abi.encodePacked(value));
    }

    function _toHex(bytes memory data) private pure returns(string memory) {
        bytes16 alphabet = 0x30313233343536373839616263646566;
        bytes memory str = new bytes(2 + data.length * 2);
        str[0] = "0";
        str[1] = "x";
        for (uint256 i = 0; i < data.length; i++) {
            str[2 * i + 2] = alphabet[uint8(data[i] >> 4)];
            str[2 * i + 3] = alphabet[uint8(data[i] & 0x0f)];
        }
        return string(str);
    }
}


// File contracts/interfaces/IERC20Permit.sol



pragma solidity ^0.6.12;


interface IERC20Permit {
    function permit(address owner, address spender, uint256 amount, uint256 deadline, uint8 v, bytes32 r, bytes32 s) external;
}


// File contracts/helpers/Permitable.sol



pragma solidity ^0.6.12;



contract Permitable {
    event Error(
        string reason
    );

    function _permit(IERC20 token, uint256 amount, bytes calldata permit) internal {
        if (permit.length == 32 * 7) {
            // solhint-disable-next-line avoid-low-level-calls
            (bool success, bytes memory result) = address(token).call(abi.encodePacked(IERC20Permit.permit.selector, permit));
            if (!success) {
                string memory reason = RevertReasonParser.parse(result, "Permit call failed: ");
                if (token.allowance(msg.sender, address(this)) < amount) {
                    revert(reason);
                } else {
                    emit Error(reason);
                }
            }
        }
    }
}


// File contracts/UnoswapRouter.sol



pragma solidity ^0.6.12;

contract UnoswapRouter is Permitable {
    uint256 private constant _TRANSFER_FROM_CALL_SELECTOR_32 = 0x23b872dd00000000000000000000000000000000000000000000000000000000;
    uint256 private constant _WETH_DEPOSIT_CALL_SELECTOR_32 = 0xd0e30db000000000000000000000000000000000000000000000000000000000;
    uint256 private constant _WETH_WITHDRAW_CALL_SELECTOR_32 = 0x2e1a7d4d00000000000000000000000000000000000000000000000000000000;
    uint256 private constant _ERC20_TRANSFER_CALL_SELECTOR_32 = 0xa9059cbb00000000000000000000000000000000000000000000000000000000;
    uint256 private constant _ADDRESS_MASK =   0x000000000000000000000000ffffffffffffffffffffffffffffffffffffffff;
    uint256 private constant _REVERSE_MASK =   0x8000000000000000000000000000000000000000000000000000000000000000;
    uint256 private constant _WETH_MASK =      0x4000000000000000000000000000000000000000000000000000000000000000;
    uint256 private constant _NUMERATOR_MASK = 0x0000000000000000ffffffff0000000000000000000000000000000000000000;
    uint256 private constant _WETH = 0x000000000000000000000000C02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2;
    uint256 private constant _UNISWAP_PAIR_RESERVES_CALL_SELECTOR_32 = 0x0902f1ac00000000000000000000000000000000000000000000000000000000;
    uint256 private constant _UNISWAP_PAIR_SWAP_CALL_SELECTOR_32 = 0x022c0d9f00000000000000000000000000000000000000000000000000000000;
    uint256 private constant _DENOMINATOR = 1000000000;
    uint256 private constant _NUMERATOR_OFFSET = 160;

    receive() external payable {
        // solhint-disable-next-line avoid-tx-origin
        require(msg.sender != tx.origin, "ETH deposit rejected");
    }

    function unoswapWithPermit(
        IERC20 srcToken,
        uint256 amount,
        uint256 minReturn,
        bytes32[] calldata pools,
        bytes calldata permit
    ) external payable returns(uint256 returnAmount) {
        _permit(srcToken, amount, permit);
        return unoswap(srcToken, amount, minReturn, pools);
    }

    function unoswap(
        IERC20 srcToken,
        uint256 amount,
        uint256 minReturn,
        bytes32[] calldata /* pools */
    ) public payable returns(uint256 returnAmount) {
        assembly {  // solhint-disable-line no-inline-assembly
            function reRevert() {
                returndatacopy(0, 0, returndatasize())
                revert(0, returndatasize())
            }

            function revertWithReason(m, len) {
                mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000)
                mstore(0x20, 0x0000002000000000000000000000000000000000000000000000000000000000)
                mstore(0x40, m)
                revert(0, len)
            }

            function swap(emptyPtr, swapAmount, pair, reversed, numerator, dst) -> ret {
                mstore(emptyPtr, _UNISWAP_PAIR_RESERVES_CALL_SELECTOR_32)
                if iszero(staticcall(gas(), pair, emptyPtr, 0x4, emptyPtr, 0x40)) {
                    reRevert()
                }

                let reserve0 := mload(emptyPtr)
                let reserve1 := mload(add(emptyPtr, 0x20))
                if reversed {
                    let tmp := reserve0
                    reserve0 := reserve1
                    reserve1 := tmp
                }
                ret := mul(swapAmount, numerator)
                ret := div(mul(ret, reserve1), add(ret, mul(reserve0, _DENOMINATOR)))

                mstore(emptyPtr, _UNISWAP_PAIR_SWAP_CALL_SELECTOR_32)
                switch reversed
                case 0 {
                    mstore(add(emptyPtr, 0x04), 0)
                    mstore(add(emptyPtr, 0x24), ret)
                }
                default {
                    mstore(add(emptyPtr, 0x04), ret)
                    mstore(add(emptyPtr, 0x24), 0)
                }
                mstore(add(emptyPtr, 0x44), dst)
                mstore(add(emptyPtr, 0x64), 0x80)
                mstore(add(emptyPtr, 0x84), 0)
                if iszero(call(gas(), pair, 0, emptyPtr, 0xa4, 0, 0)) {
                    reRevert()
                }
            }

            let emptyPtr := mload(0x40)
            mstore(0x40, add(emptyPtr, 0xc0))

            let poolsOffset := add(calldataload(0x64), 0x4)
            let poolsEndOffset := calldataload(poolsOffset)
            poolsOffset := add(poolsOffset, 0x20)
            poolsEndOffset := add(poolsOffset, mul(0x20, poolsEndOffset))
            let rawPair := calldataload(poolsOffset)
            switch srcToken
            case 0 {
                if iszero(eq(amount, callvalue())) {
                    revertWithReason(0x00000011696e76616c6964206d73672e76616c75650000000000000000000000, 0x55)  // "invalid msg.value"
                }

                mstore(emptyPtr, _WETH_DEPOSIT_CALL_SELECTOR_32)
                if iszero(call(gas(), _WETH, amount, emptyPtr, 0x4, 0, 0)) {
                    reRevert()
                }

                mstore(emptyPtr, _ERC20_TRANSFER_CALL_SELECTOR_32)
                mstore(add(emptyPtr, 0x4), and(rawPair, _ADDRESS_MASK))
                mstore(add(emptyPtr, 0x24), amount)
                if iszero(call(gas(), _WETH, 0, emptyPtr, 0x44, 0, 0)) {
                    reRevert()
                }
            }
            default {
                if callvalue() {
                    revertWithReason(0x00000011696e76616c6964206d73672e76616c75650000000000000000000000, 0x55)  // "invalid msg.value"
                }

                mstore(emptyPtr, _TRANSFER_FROM_CALL_SELECTOR_32)
                mstore(add(emptyPtr, 0x4), caller())
                mstore(add(emptyPtr, 0x24), and(rawPair, _ADDRESS_MASK))
                mstore(add(emptyPtr, 0x44), amount)
                if iszero(call(gas(), srcToken, 0, emptyPtr, 0x64, 0, 0)) {
                    reRevert()
                }
            }

            returnAmount := amount

            for {let i := add(poolsOffset, 0x20)} lt(i, poolsEndOffset) {i := add(i, 0x20)} {
                let nextRawPair := calldataload(i)

                returnAmount := swap(
                    emptyPtr,
                    returnAmount,
                    and(rawPair, _ADDRESS_MASK),
                    and(rawPair, _REVERSE_MASK),
                    shr(_NUMERATOR_OFFSET, and(rawPair, _NUMERATOR_MASK)),
                    and(nextRawPair, _ADDRESS_MASK)
                )

                rawPair := nextRawPair
            }

            switch and(rawPair, _WETH_MASK)
            case 0 {
                returnAmount := swap(
                    emptyPtr,
                    returnAmount,
                    and(rawPair, _ADDRESS_MASK),
                    and(rawPair, _REVERSE_MASK),
                    shr(_NUMERATOR_OFFSET, and(rawPair, _NUMERATOR_MASK)),
                    caller()
                )
            }
            default {
                returnAmount := swap(
                    emptyPtr,
                    returnAmount,
                    and(rawPair, _ADDRESS_MASK),
                    and(rawPair, _REVERSE_MASK),
                    shr(_NUMERATOR_OFFSET, and(rawPair, _NUMERATOR_MASK)),
                    address()
                )

                mstore(emptyPtr, _WETH_WITHDRAW_CALL_SELECTOR_32)
                mstore(add(emptyPtr, 0x04), returnAmount)
                if iszero(call(gas(), _WETH, 0, emptyPtr, 0x24, 0, 0)) {
                 ...

// [truncated — 55465 bytes total]