Cryo Explorer Ethereum Mainnet

// SPDX-License-Identifier: BUSL-1.1
pragma solidity =0.8.7 ^0.8.7;

// contracts/interfaces/Interfaces.sol

interface IERC20Like_0 {

    function allowance(address owner_, address spender_) external view returns (uint256 allowance_);

    function balanceOf(address account_) external view returns (uint256 balance_);

    function totalSupply() external view returns (uint256 totalSupply_);

}

interface IGlobalsLike {

    function bootstrapMint(address asset_) external view returns (uint256 bootstrapMint_);

    function governor() external view returns (address governor_);

    function isFunctionPaused(bytes4 sig_) external view returns (bool isFunctionPaused_);

    function isInstanceOf(bytes32 instanceId_, address instance_) external view returns (bool isInstance_);

    function isPoolAsset(address asset_) external view returns (bool isPoolAsset_);

    function isPoolDelegate(address account_) external view returns (bool isPoolDelegate_);

    function isPoolDeployer(address poolDeployer_) external view returns (bool isPoolDeployer_);

    function isValidScheduledCall(address caller_, address contract_, bytes32 functionId_, bytes calldata callData_)
        external view
        returns (bool isValid_);

    function mapleTreasury() external view returns (address mapleTreasury_);

    function maxCoverLiquidationPercent(address poolManager_) external view returns (uint256 maxCoverLiquidationPercent_);

    function migrationAdmin() external view returns (address migrationAdmin_);

    function minCoverAmount(address poolManager_) external view returns (uint256 minCoverAmount_);

    function operationalAdmin() external view returns (address operationalAdmin_);

    function ownedPoolManager(address poolDelegate_) external view returns (address poolManager_);

    function securityAdmin() external view returns (address securityAdmin_);

    function transferOwnedPoolManager(address fromPoolDelegate_, address toPoolDelegate_) external;

    function unscheduleCall(address caller_, bytes32 functionId_, bytes calldata callData_) external;

}

interface ILoanManagerLike {

    function assetsUnderManagement() external view returns (uint256 assetsUnderManagement_);

    function finishCollateralLiquidation(address loan_) external returns (uint256 remainingLosses_, uint256 serviceFee_);

    function triggerDefault(address loan_, address liquidatorFactory_)
        external
        returns (bool liquidationComplete_, uint256 remainingLosses_, uint256 platformFees_);

    function unrealizedLosses() external view returns (uint256 unrealizedLosses_);

}

interface ILoanLike {

    function lender() external view returns (address lender_);

}

interface IMapleProxyFactoryLike {

    function isInstance(address instance_) external view returns (bool isInstance_);

    function mapleGlobals() external view returns (address mapleGlobals_);

}

interface IPoolDelegateCoverLike {

    function moveFunds(uint256 amount_, address recipient_) external;

}

interface IPoolLike is IERC20Like_0 {

    function convertToExitShares(uint256 assets_) external view returns (uint256 shares_);

    function previewDeposit(uint256 assets_) external view returns (uint256 shares_);

    function previewMint(uint256 shares_) external view returns (uint256 assets_);

}

interface IPoolManagerLike {

    function addLoanManager(address loanManagerFactory_) external returns (address loanManager_);

    function canCall(bytes32 functionId_, address caller_, bytes memory data_)
        external view
        returns (bool canCall_, string memory errorMessage_);

    function completeConfiguration() external;

    function getEscrowParams(address owner_, uint256 shares_) external view returns (uint256 escrowShares_, address escrow_);

    function maxDeposit(address receiver_) external view returns (uint256 maxAssets_);

    function maxMint(address receiver_) external view returns (uint256 maxShares_);

    function maxRedeem(address owner_) external view returns (uint256 maxShares_);

    function maxWithdraw(address owner_) external view returns (uint256 maxAssets_);

    function pool() external view returns (address pool_);

    function poolDelegateCover() external view returns (address poolDelegateCover_);

    function previewRedeem(address owner_, uint256 shares_) external view returns (uint256 assets_);

    function previewWithdraw(address owner_, uint256 assets_) external view returns (uint256 shares_);

    function processRedeem(uint256 shares_, address owner_, address sender_)
        external
        returns (uint256 redeemableShares_, uint256 resultingAssets_);

    function processWithdraw(uint256 assets_, address owner_, address sender_)
        external
        returns (uint256 redeemableShares_, uint256 resultingAssets_);

    function removeShares(uint256 shares_, address owner_) external returns (uint256 sharesReturned_);

    function requestRedeem(uint256 shares_, address owner_, address sender_) external;

    function requestWithdraw(uint256 shares_, uint256 assets_, address owner_, address sender_) external;

    function setDelegateManagementFeeRate(uint256 delegateManagementFeeRate_) external;

    function setLiquidityCap(uint256 liquidityCap_) external;

    function setPoolPermissionManager(address poolPermissionManager_) external;

    function setWithdrawalManager(address withdrawalManager_) external;

    function totalAssets() external view returns (uint256 totalAssets_);

    function unrealizedLosses() external view returns (uint256 unrealizedLosses_);

}

interface IPoolPermissionManagerLike {

    function hasPermission(address poolManager, address caller, bytes32 functionId) external view returns (bool allowed);

    function hasPermission(address poolManager, address[] calldata caller, bytes32 functionId) external view returns (bool allowed);

}

interface IWithdrawalManagerLike {

    function addShares(uint256 shares_, address owner_) external;

    function factory() external view returns (address factory_);

    function isInExitWindow(address owner_) external view returns (bool isInExitWindow_);

    function lockedLiquidity() external view returns (uint256 lockedLiquidity_);

    function lockedShares(address owner_) external view returns (uint256 lockedShares_);

    function previewRedeem(address owner_, uint256 shares) external view returns (uint256 redeemableShares, uint256 resultingAssets_);

    function previewWithdraw(address owner_, uint256 assets_) external view returns (uint256 redeemableAssets_, uint256 resultingShares_);

    function processExit(uint256 shares_, address account_) external returns (uint256 redeemableShares_, uint256 resultingAssets_);

    function removeShares(uint256 shares_, address owner_) external returns (uint256 sharesReturned_);

}

// modules/erc20/contracts/interfaces/IERC20.sol

/// @title Interface of the ERC20 standard as defined in the EIP, including EIP-2612 permit functionality.
interface IERC20 {

    /**************************************************************************************************************************************/
    /*** Events                                                                                                                         ***/
    /**************************************************************************************************************************************/

    /**
     *  @dev   Emitted when one account has set the allowance of another account over their tokens.
     *  @param owner_   Account that tokens are approved from.
     *  @param spender_ Account that tokens are approved for.
     *  @param amount_  Amount of tokens that have been approved.
     */
    event Approval(address indexed owner_, address indexed spender_, uint256 amount_);

    /**
     *  @dev   Emitted when tokens have moved from one account to another.
     *  @param owner_     Account that tokens have moved from.
     *  @param recipient_ Account that tokens have moved to.
     *  @param amount_    Amount of tokens that have been transferred.
     */
    event Transfer(address indexed owner_, address indexed recipient_, uint256 amount_);

    /**************************************************************************************************************************************/
    /*** External Functions                                                                                                             ***/
    /**************************************************************************************************************************************/

    /**
     *  @dev    Function that allows one account to set the allowance of another account over their tokens.
     *          Emits an {Approval} event.
     *  @param  spender_ Account that tokens are approved for.
     *  @param  amount_  Amount of tokens that have been approved.
     *  @return success_ Boolean indicating whether the operation succeeded.
     */
    function approve(address spender_, uint256 amount_) external returns (bool success_);

    /**
     *  @dev    Function that allows one account to decrease the allowance of another account over their tokens.
     *          Emits an {Approval} event.
     *  @param  spender_          Account that tokens are approved for.
     *  @param  subtractedAmount_ Amount to decrease approval by.
     *  @return success_          Boolean indicating whether the operation succeeded.
     */
    function decreaseAllowance(address spender_, uint256 subtractedAmount_) external returns (bool success_);

    /**
     *  @dev    Function that allows one account to increase the allowance of another account over their tokens.
     *          Emits an {Approval} event.
     *  @param  spender_     Account that tokens are approved for.
     *  @param  addedAmount_ Amount to increase approval by.
     *  @return success_     Boolean indicating whether the operation succeeded.
     */
    function increaseAllowance(address spender_, uint256 addedAmount_) external returns (bool success_);

    /**
     *  @dev   Approve by signature.
     *  @param owner_    Owner address that signed the permit.
     *  @param spender_  Spender of the permit.
     *  @param amount_   Permit approval spend limit.
     *  @param deadline_ Deadline after which the permit is invalid.
     *  @param v_        ECDSA signature v component.
     *  @param r_        ECDSA signature r component.
     *  @param s_        ECDSA signature s component.
     */
    function permit(address owner_, address spender_, uint amount_, uint deadline_, uint8 v_, bytes32 r_, bytes32 s_) external;

    /**
     *  @dev    Moves an amount of tokens from `msg.sender` to a specified account.
     *          Emits a {Transfer} event.
     *  @param  recipient_ Account that receives tokens.
     *  @param  amount_    Amount of tokens that are transferred.
     *  @return success_   Boolean indicating whether the operation succeeded.
     */
    function transfer(address recipient_, uint256 amount_) external returns (bool success_);

    /**
     *  @dev    Moves a pre-approved amount of tokens from a sender to a specified account.
     *          Emits a {Transfer} event.
     *          Emits an {Approval} event.
     *  @param  owner_     Account that tokens are moving from.
     *  @param  recipient_ Account that receives tokens.
     *  @param  amount_    Amount of tokens that are transferred.
     *  @return success_   Boolean indicating whether the operation succeeded.
     */
    function transferFrom(address owner_, address recipient_, uint256 amount_) external returns (bool success_);

    /**************************************************************************************************************************************/
    /*** View Functions                                                                                                                 ***/
    /**************************************************************************************************************************************/

    /**
     *  @dev    Returns the allowance that one account has given another over their tokens.
     *  @param  owner_     Account that tokens are approved from.
     *  @param  spender_   Account that tokens are approved for.
     *  @return allowance_ Allowance that one account has given another over their tokens.
     */
    function allowance(address owner_, address spender_) external view returns (uint256 allowance_);

    /**
     *  @dev    Returns the amount of tokens owned by a given account.
     *  @param  account_ Account that owns the tokens.
     *  @return balance_ Amount of tokens owned by a given account.
     */
    function balanceOf(address account_) external view returns (uint256 balance_);

    /**
     *  @dev    Returns the decimal precision used by the token.
     *  @return decimals_ The decimal precision used by the token.
     */
    function decimals() external view returns (uint8 decimals_);

    /**
     *  @dev    Returns the signature domain separator.
     *  @return domainSeparator_ The signature domain separator.
     */
    function DOMAIN_SEPARATOR() external view returns (bytes32 domainSeparator_);

    /**
     *  @dev    Returns the name of the token.
     *  @return name_ The name of the token.
     */
    function name() external view returns (string memory name_);

    /**
      *  @dev    Returns the nonce for the given owner.
      *  @param  owner_  The address of the owner account.
      *  @return nonce_ The nonce for the given owner.
     */
    function nonces(address owner_) external view returns (uint256 nonce_);

    /**
     *  @dev    Returns the permit type hash.
     *  @return permitTypehash_ The permit type hash.
     */
    function PERMIT_TYPEHASH() external view returns (bytes32 permitTypehash_);

    /**
     *  @dev    Returns the symbol of the token.
     *  @return symbol_ The symbol of the token.
     */
    function symbol() external view returns (string memory symbol_);

    /**
     *  @dev    Returns the total amount of tokens in existence.
     *  @return totalSupply_ The total amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256 totalSupply_);

}

// modules/erc20-helper/src/interfaces/IERC20Like.sol

/// @title Interface of the ERC20 standard as needed by ERC20Helper.
interface IERC20Like_1 {

    function approve(address spender_, uint256 amount_) external returns (bool success_);

    function transfer(address recipient_, uint256 amount_) external returns (bool success_);

    function transferFrom(address owner_, address recipient_, uint256 amount_) external returns (bool success_);

}

// contracts/interfaces/IERC4626.sol

/// @title A standard for tokenized Vaults with a single underlying ERC-20 token.
interface IERC4626 is IERC20 {

    /**************************************************************************************************************************************/
    /*** Events                                                                                                                         ***/
    /**************************************************************************************************************************************/

    /**
     *  @dev   `caller_` has exchanged `assets_` for `shares_` and transferred them to `owner_`.
     *         MUST be emitted when assets are deposited via the `deposit` or `mint` methods.
     *  @param caller_ The caller of the function that emitted the `Deposit` event.
     *  @param owner_  The owner of the shares.
     *  @param assets_ The amount of assets deposited.
     *  @param shares_ The amount of shares minted.
     */
    event Deposit(address indexed caller_, address indexed owner_, uint256 assets_, uint256 shares_);

    /**
     *  @dev   `caller_` has exchanged `shares_`, owned by `owner_`, for `assets_`, and transferred them to `receiver_`.
     *         MUST be emitted when assets are withdrawn via the `withdraw` or `redeem` methods.
     *  @param caller_   The caller of the function that emitted the `Withdraw` event.
     *  @param receiver_ The receiver of the assets.
     *  @param owner_    The owner of the shares.
     *  @param assets_   The amount of assets withdrawn.
     *  @param shares_   The amount of shares burned.
     */
    event Withdraw(address indexed caller_, address indexed receiver_, address indexed owner_, uint256 assets_, uint256 shares_);

    /**************************************************************************************************************************************/
    /*** State Variables                                                                                                                ***/
    /**************************************************************************************************************************************/

    /**
     *  @dev    The address of the underlying asset used by the Vault.
     *          MUST be a contract that implements the ERC-20 standard.
     *          MUST NOT revert.
     *  @return asset_ The address of the underlying asset.
     */
    function asset() external view returns (address asset_);

    /**************************************************************************************************************************************/
    /*** State Changing Functions                                                                                                       ***/
    /**************************************************************************************************************************************/

    /**
     *  @dev    Mints `shares_` to `receiver_` by depositing `assets_` into the Vault.
     *          MUST emit the {Deposit} event.
     *          MUST revert if all of the assets cannot be deposited (due to insufficient approval, deposit limits, slippage, etc).
     *  @param  assets_   The amount of assets to deposit.
     *  @param  receiver_ The receiver of the shares.
     *  @return shares_   The amount of shares minted.
     */
    function deposit(uint256 assets_, address receiver_) external returns (uint256 shares_);

    /**
     *  @dev    Mints `shares_` to `receiver_` by depositing `assets_` into the Vault.
     *          MUST emit the {Deposit} event.
     *          MUST revert if all of shares cannot be minted (due to insufficient approval, deposit limits, slippage, etc).
     *  @param  shares_   The amount of shares to mint.
     *  @param  receiver_ The receiver of the shares.
     *  @return assets_   The amount of assets deposited.
     */
    function mint(uint256 shares_, address receiver_) external returns (uint256 assets_);

    /**
     *  @dev    Burns `shares_` from `owner_` and sends `assets_` to `receiver_`.
     *          MUST emit the {Withdraw} event.
     *          MUST revert if all of the shares cannot be redeemed (due to insufficient shares, withdrawal limits, slippage, etc).
     *  @param  shares_   The amount of shares to redeem.
     *  @param  receiver_ The receiver of the assets.
     *  @param  owner_    The owner of the shares.
     *  @return assets_   The amount of assets sent to the receiver.
     */
    function redeem(uint256 shares_, address receiver_, address owner_) external returns (uint256 assets_);

    /**
     *  @dev    Burns `shares_` from `owner_` and sends `assets_` to `receiver_`.
     *          MUST emit the {Withdraw} event.
     *          MUST revert if all of the assets cannot be withdrawn (due to insufficient assets, withdrawal limits, slippage, etc).
     *  @param  assets_   The amount of assets to withdraw.
     *  @param  receiver_ The receiver of the assets.
     *  @param  owner_    The owner of the assets.
     *  @return shares_   The amount of shares burned from the owner.
     */
    function withdraw(uint256 assets_, address receiver_, address owner_) external returns (uint256 shares_);

    /**************************************************************************************************************************************/
    /*** View Functions                                                                                                                 ***/
    /**************************************************************************************************************************************/

    /**
     *  @dev    The amount of `assets_` the `shares_` are currently equivalent to.
     *          MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     *          MUST NOT reflect slippage or other on-chain conditions when performing the actual exchange.
     *          MUST NOT show any variations depending on the caller.
     *          MUST NOT revert.
     *  @param  shares_ The amount of shares to convert.
     *  @return assets_ The amount of equivalent assets.
     */
    function convertToAssets(uint256 shares_) external view returns (uint256 assets_);

    /**
     *  @dev    The amount of `shares_` the `assets_` are currently equivalent to.
     *          MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     *          MUST NOT reflect slippage or other on-chain conditions when performing the actual exchange.
     *          MUST NOT show any variations depending on the caller.
     *          MUST NOT revert.
     *  @param  assets_ The amount of assets to convert.
     *  @return shares_ The amount of equivalent shares.
     */
    function convertToShares(uint256 assets_) external view returns (uint256 shares_);

    /**
     *  @dev    Maximum amount of `assets_` that can be deposited on behalf of the `receiver_` through a `deposit` call.
     *          MUST return a limited value if the receiver is subject to any limits, or the maximum value otherwise.
     *          MUST NOT revert.
     *  @param  receiver_ The receiver of the assets.
     *  @return assets_   The maximum amount of assets that can be deposited.
     */
    function maxDeposit(address receiver_) external view returns (uint256 assets_);

    /**
     *  @dev    Maximum amount of `shares_` that can be minted on behalf of the `receiver_` through a `mint` call.
     *          MUST return a limited value if the receiver is subject to any limits, or the maximum value otherwise.
     *          MUST NOT revert.
     *  @param  receiver_ The receiver of the shares.
     *  @return shares_   The maximum amount of shares that can be minted.
     */
    function maxMint(address receiver_) external view returns (uint256 shares_);

    /**
     *  @dev    Maximum amount of `shares_` that can be redeemed from the `owner_` through a `redeem` call.
     *          MUST return a limited value if the owner is subject to any limits, or the total amount of owned shares otherwise.
     *          MUST NOT revert.
     *  @param  owner_  The owner of the shares.
     *  @return shares_ The maximum amount of shares that can be redeemed.
     */
    function maxRedeem(address owner_) external view returns (uint256 shares_);

    /**
     *  @dev    Maximum amount of `assets_` that can be withdrawn from the `owner_` through a `withdraw` call.
     *          MUST return a limited value if the owner is subject to any limits, or the total amount of owned assets otherwise.
     *          MUST NOT revert.
     *  @param  owner_  The owner of the assets.
     *  @return assets_ The maximum amount of assets that can be withdrawn.
     */
    function maxWithdraw(address owner_) external view returns (uint256 assets_);

    /**
     *  @dev    Allows an on-chain or off-chain user to simulate the effects of their deposit at the current block, given current on-chain conditions.
     *          MUST return as close to and no more than the exact amount of shares that would be minted in a `deposit` call in the same transaction.
     *          MUST NOT account for deposit limits like those returned from `maxDeposit` and should always act as though the deposit would be accepted.
     *  @param  assets_ The amount of assets to deposit.
     *  @return shares_ The amount of shares that would be minted.
     */
    function previewDeposit(uint256 assets_) external view returns (uint256 shares_);

    /**
     *  @dev    Allows an on-chain or off-chain user to simulate the effects of their mint at the current block, given current on-chain conditions.
     *          MUST return as close to and no fewer than the exact amount of assets that would be deposited in a `mint` call in the same transaction.
     *          MUST NOT account for mint limits like those returned from `maxMint` and should always act as though the minting would be accepted.
     *  @param  shares_ The amount of shares to mint.
     *  @return assets_ The amount of assets that would be deposited.
     */
    function previewMint(uint256 shares_) external view returns (uint256 assets_);

    /**
     *  @dev    Allows an on-chain or off-chain user to simulate the effects of their redemption at the current block, given current on-chain conditions.
     *          MUST return as close to and no more than the exact amount of assets that would be withdrawn in a `redeem` call in the same transaction.
     *          MUST NOT account for redemption limits like those returned from `maxRedeem` and should always act as though the redemption would be accepted.
     *  @param  shares_ The amount of shares to redeem.
     *  @return assets_ The amount of assets that would be withdrawn.
     */
    function previewRedeem(uint256 shares_) external view returns (uint256 assets_);

    /**
     *  @dev    Allows an on-chain or off-chain user to simulate the effects of their withdrawal at the current block, given current on-chain conditions.
     *          MUST return as close to and no fewer than the exact amount of shares that would be burned in a `withdraw` call in the same transaction.
     *          MUST NOT account for withdrawal limits like those returned from `maxWithdraw` and should always act as though the withdrawal would be accepted.
     *  @param  assets_ The amount of assets to withdraw.
     *  @return shares_ The amount of shares that would be redeemed.
     */
    function previewWithdraw(uint256 assets_) external view returns (uint256 shares_);

    /**
     *  @dev    Total amount of the underlying asset that is managed by the Vault.
     *          SHOULD include compounding that occurs from any yields.
     *          MUST NOT revert.
     *  @return totalAssets_ The total amount of assets the Vault manages.
     */
    function totalAssets() external view returns (uint256 totalAssets_);

}

// modules/erc20/contracts/ERC20.sol

/*
    ███████╗██████╗  ██████╗    ██████╗  ██████╗
    ██╔════╝██╔══██╗██╔════╝    ╚════██╗██╔═████╗
    █████╗  ██████╔╝██║          █████╔╝██║██╔██║
    ██╔══╝  ██╔══██╗██║         ██╔═══╝ ████╔╝██║
    ███████╗██║  ██║╚██████╗    ███████╗╚██████╔╝
    ╚══════╝╚═╝  ╚═╝ ╚═════╝    ╚══════╝ ╚═════╝
*/

/**
 *  @title Modern ERC-20 implementation.
 *  @dev   Acknowledgements to Solmate, OpenZeppelin, and DSS for inspiring this code.
 */
contract ERC20 is IERC20 {

    /**************************************************************************************************************************************/
    /*** ERC-20                                                                                                                         ***/
    /**************************************************************************************************************************************/

    string public override name;
    string public override symbol;

    uint8 public immutable override decimals;

    uint256 public override totalSupply;

    mapping(address => uint256) public override balanceOf;

    mapping(address => mapping(address => uint256)) public override allowance;

    /**************************************************************************************************************************************/
    /*** ERC-2612                                                                                                                       ***/
    /**************************************************************************************************************************************/

    // PERMIT_TYPEHASH = keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");
    bytes32 public constant override PERMIT_TYPEHASH = 0x6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c9;

    mapping(address => uint256) public override nonces;

    /**
     *  @param name_     The name of the token.
     *  @param symbol_   The symbol of the token.
     *  @param decimals_ The decimal precision used by the token.
     */
    constructor(string memory name_, string memory symbol_, uint8 decimals_) {
        name     = name_;
        symbol   = symbol_;
        decimals = decimals_;
    }

    /**************************************************************************************************************************************/
    /*** External Functions                                                                                                             ***/
    /**************************************************************************************************************************************/

    function approve(address spender_, uint256 amount_) public virtual override returns (bool success_) {
        _approve(msg.sender, spender_, amount_);
        return true;
    }

    function decreaseAllowance(address spender_, uint256 subtractedAmount_) public virtual override returns (bool success_) {
        _decreaseAllowance(msg.sender, spender_, subtractedAmount_);
        return true;
    }

    function increaseAllowance(address spender_, uint256 addedAmount_) public virtual override returns (bool success_) {
        _approve(msg.sender, spender_, allowance[msg.sender][spender_] + addedAmount_);
        return true;
    }

    function permit(address owner_, address spender_, uint256 amount_, uint256 deadline_, uint8 v_, bytes32 r_, bytes32 s_)
        public virtual override
    {
        require(deadline_ >= block.timestamp, "ERC20:P:EXPIRED");

        // Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}.
        require(
            uint256(s_) <= uint256(0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) &&
            (v_ == 27 || v_ == 28),
            "ERC20:P:MALLEABLE"
        );

        // Nonce realistically cannot overflow.
        unchecked {
            bytes32 digest_ = keccak256(
                abi.encodePacked(
                    "\x19\x01",
                    DOMAIN_SEPARATOR(),
                    keccak256(abi.encode(PERMIT_TYPEHASH, owner_, spender_, amount_, nonces[owner_]++, deadline_))
                )
            );

            address recoveredAddress_ = ecrecover(digest_, v_, r_, s_);

            require(recoveredAddress_ == owner_ && owner_ != address(0), "ERC20:P:INVALID_SIGNATURE");
        }

        _approve(owner_, spender_, amount_);
    }

    function transfer(address recipient_, uint256 amount_) public virtual override returns (bool success_) {
        _transfer(msg.sender, recipient_, amount_);
        return true;
    }

    function transferFrom(address owner_, address recipient_, uint256 amount_) public virtual override returns (bool success_) {
        _decreaseAllowance(owner_, msg.sender, amount_);
        _transfer(owner_, recipient_, amount_);
        return true;
    }

    /**************************************************************************************************************************************/
    /*** View Functions                                                                                                                 ***/
    /**************************************************************************************************************************************/

    function DOMAIN_SEPARATOR() public view override returns (bytes32 domainSeparator_) {
        return keccak256(
            abi.encode(
                keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"),
                keccak256(bytes(name)),
                keccak256(bytes("1")),
                block.chainid,
                address(this)
            )
        );
    }

    /**************************************************************************************************************************************/
    /*** Internal Functions                                                                                                             ***/
    /**************************************************************************************************************************************/

    function _approve(address owner_, address spender_, uint256 amount_) internal {
        emit Approval(owner_, spender_, allowance[owner_][spender_] = amount_);
    }

    function _burn(address owner_, uint256 amount_) internal {
        balanceOf[owner_] -= amount_;

        // Cannot underflow because a user's balance will never be larger than the total supply.
        unchecked { totalSupply -= amount_; }

        emit Transfer(owner_, address(0), amount_);
    }

    function _decreaseAllowance(address owner_, address spender_, uint256 subtractedAmount_) internal {
        uint256 spenderAllowance = allowance[owner_][spender_];  // Cache to memory.

        if (spenderAllowance != type(uint256).max) {
            _approve(owner_, spender_, spenderAllowance - subtractedAmount_);
        }
    }

    function _mint(address recipient_, uint256 amount_) internal {
        totalSupply += amount_;

        // Cannot overflow because totalSupply would first overflow in the statement above.
        unchecked { balanceOf[recipient_] += amount_; }

        emit Transfer(address(0), recipient_, amount_);
    }

    function _transfer(address owner_, address recipient_, uint256 amount_) internal {
        balanceOf[owner_] -= amount_;

        // Cannot overflow because minting prevents overflow of totalSupply, and sum of user balances == totalSupply.
        unchecked { balanceOf[recipient_] += amount_; }

        emit Transfer(owner_, recipient_, amount_);
    }

}

// modules/erc20-helper/src/ERC20Helper.sol

/**
 * @title Small Library to standardize erc20 token interactions.
 */
library ERC20Helper {

    /**************************************************************************************************************************************/
    /*** Internal Functions                                                                                                             ***/
    /**************************************************************************************************************************************/

    function transfer(address token_, address to_, uint256 amount_) internal returns (bool success_) {
        return _call(token_, abi.encodeWithSelector(IERC20Like_1.transfer.selector, to_, amount_));
    }

    function transferFrom(address token_, address from_, address to_, uint256 amount_) internal returns (bool success_) {
        return _call(token_, abi.encodeWithSelector(IERC20Like_1.transferFrom.selector, from_, to_, amount_));
    }

    function approve(address token_, address spender_, uint256 amount_) internal returns (bool success_) {
        // If setting approval to zero fails, return false.
        if (!_call(token_, abi.encodeWithSelector(IERC20Like_1.approve.selector, spender_, uint256(0)))) return false;

        // If `amount_` is zero, return true as the previous step already did this.
        if (amount_ == uint256(0)) return true;

        // Return the result of setting the approval to `amount_`.
        return _call(token_, abi.encodeWithSelector(IERC20Like_1.approve.selector, spender_, amount_));
    }

    function _call(address token_, bytes memory data_) private returns (bool success_) {
        if (token_.code.length == uint256(0)) return false;

        bytes memory returnData;
        ( success_, returnData ) = token_.call(data_);

        return success_ && (returnData.length == uint256(0) || abi.decode(returnData, (bool)));
    }

}

// contracts/interfaces/IMaplePool.sol

interface IMaplePool is IERC20, IERC4626 {

    /**************************************************************************************************************************************/
    /*** Events                                                                                                                         ***/
    /**************************************************************************************************************************************/

    /**
     *  @dev   Initial shares amount was minted to the zero address to prevent the first depositor frontrunning exploit.
     *  @param caller_              The caller of the function that emitted the `BootstrapMintPerformed` event.
     *  @param receiver_            The user that was minted the shares.
     *  @param assets_              The amount of assets deposited.
     *  @param shares_              The amount of shares that would have been minted to the user if it was not the first deposit.
     *  @param bootStrapMintAmount_ The amount of shares that was minted to the zero address to protect the first depositor.
     */
    event BootstrapMintPerformed(
        address indexed caller_,
        address indexed receiver_,
        uint256 assets_,
        uint256 shares_,
        uint256 bootStrapMintAmount_
    );

    /**
     *  @dev   `newOwner_` has accepted the transferral of RDT ownership from `previousOwner_`.
     *  @param previousOwner_ The previous RDT owner.
     *  @param newOwner_      The new RDT owner.
     */
    event OwnershipAccepted(address indexed previousOwner_, address indexed newOwner_);

    /**
     *  @dev   `owner_` has set the new pending owner of RDT to `pendingOwner_`.
     *  @param owner_        The current RDT owner.
     *  @param pendingOwner_ The new pending RDT owner.
     */
    event PendingOwnerSet(address indexed owner_, address indexed pendingOwner_);

    /**
     *  @dev   A new redemption request has been made.
     *  @param owner_          The owner of shares.
     *  @param shares_         The amount of shares requested to redeem.
     *  @param escrowedShares_ The amount of shares actually escrowed for this withdrawal request.
     */
    event RedemptionRequested(address indexed owner_, uint256 shares_, uint256 escrowedShares_);

    /**
     *  @dev   Shares have been removed.
     *  @param owner_  The owner of shares.
     *  @param shares_ The amount of shares requested to be removed.
     */
    event SharesRemoved(address indexed owner_, uint256 shares_);

    /**
     *  @dev   A new withdrawal request has been made.
     *  @param owner_          The owner of shares.
     *  @param assets_         The amount of assets requested to withdraw.
     *  @param escrowedShares_ The amount of shares actually escrowed for this withdrawal request.
     */
    event WithdrawRequested(address indexed owner_, uint256 assets_, uint256 escrowedShares_);

    /**************************************************************************************************************************************/
    /*** State Variables                                                                                                                ***/
    /**************************************************************************************************************************************/

    /**
     *  @dev    The amount of shares that will be burned during the first deposit/mint.
     *  @return bootstrapMint_ The amount of shares to be burned.
     */
    function BOOTSTRAP_MINT() external view returns (uint256 bootstrapMint_);

    /**
     *  @dev    The address of the account that is allowed to update the vesting schedule.
     *  @return manager_ The address of the pool manager.
     */
    function manager() external view returns (address manager_);

    /**************************************************************************************************************************************/
    /*** LP Functions                                                                                                                   ***/
    /**************************************************************************************************************************************/

    /**
     *  @dev    Does a ERC4626 `deposit` with a ERC-2612 `permit`.
     *  @param  assets_   The amount of `asset` to deposit.
     *  @param  receiver_ The receiver of the shares.
     *  @param  deadline_ The timestamp after which the `permit` signature is no longer valid.
     *  @param  v_        ECDSA signature v component.
     *  @param  r_        ECDSA signature r component.
     *  @param  s_        ECDSA signature s component.
     *  @return shares_   The amount of shares minted.
     */
    function depositWithPermit(uint256 assets_, address receiver_, uint256 deadline_, uint8 v_, bytes32 r_, bytes32 s_)
        external returns (uint256 shares_);

    /**
     *  @dev    Does a ERC4626 `mint` with a ERC-2612 `permit`.
     *  @param  shares_    The amount of `shares` to mint.
     *  @param  receiver_  The receiver of the shares.
     *  @param  maxAssets_ The maximum amount of assets that can be taken, as per the permit.
     *  @param  deadline_  The timestamp after which the `permit` signature is no longer valid.
     *  @param  v_         ECDSA signature v component.
     *  @param  r_         ECDSA signature r component.
     *  @param  s_         ECDSA signature s component.
     *  @return assets_    The amount of shares deposited.
     */
    function mintWithPermit(uint256 shares_, address receiver_, uint256 maxAssets_, uint256 deadline_, uint8 v_, bytes32 r_, bytes32 s_)
        external returns (uint256 assets_);

    /**************************************************************************************************************************************/
    /*** Withdrawal Request Functions                                                                                                   ***/
    /**************************************************************************************************************************************/

    /**
     *  @dev    Removes shares from the withdrawal mechanism, can only be called after the beginning of the withdrawal window has passed.
     *  @param  shares_         The amount of shares to redeem.
     *  @param  owner_          The owner of the shares.
     *  @return sharesReturned_ The amount of shares withdrawn.
     */
    function removeShares(uint256 shares_, address owner_) external returns (uint256 sharesReturned_);

    /**
     *  @dev    Requests a redemption of shares from the pool.
     *  @param  shares_       The amount of shares to redeem.
     *  @param  owner_        The owner of the shares.
     *  @return escrowShares_ The amount of shares sent to escrow.
     */
    function requestRedeem(uint256 shares_, address owner_) external returns (uint256 escrowShares_);

    /**
     *  @dev    Requests a withdrawal of assets from the pool.
     *  @param  assets_       The amount of assets to withdraw.
     *  @param  owner_        The owner of the shares.
     *  @return escrowShares_ The amount of shares sent to escrow.
     */
    function requestWithdraw(uint256 assets_, address owner_) external returns (uint256 escrowShares_);

    /**************************************************************************************************************************************/
    /*** View Functions                                                                                                                 ***/
    /**************************************************************************************************************************************/

    /**
     *  @dev    Returns the amount of underlying assets owned by the specified account.
     *  @param  account_ Address of the account.
     *  @return assets_  Amount of assets owned.
     */
    function balanceOfAssets(address account_) external view returns (uint256 assets_);

    /**
     *  @dev    Returns the amount of exit assets for the input amount.
     *  @param  shares_ The amount of shares to convert to assets.
     *  @return assets_ Amount of assets able to be exited.
     */
    function convertToExitAssets(uint256 shares_) external view returns (uint256 assets_);

    /**
     *  @dev    Returns the amount of exit shares for the input amount.
     *  @param  assets_ The amount of assets to convert to shares.
     *  @return shares_ Amount of shares able to be exited.
     */
    function convertToExitShares(uint256 assets_) external view returns (uint256 shares_);

    /**
     *  @dev    Returns the amount unrealized losses.
     *  @return unrealizedLosses_ Amount of unrealized losses.
     */
    function unrealizedLosses() external view returns (uint256 unrealizedLosses_);

}

// contracts/MaplePool.sol

/*

    ███╗   ███╗ █████╗ ██████╗ ██╗     ███████╗    ██████╗  ██████╗  ██████╗ ██╗
    ████╗ ████║██╔══██╗██╔══██╗██║     ██╔════╝    ██╔══██╗██╔═══██╗██╔═══██╗██║
    ██╔████╔██║███████║██████╔╝██║     █████╗      ██████╔╝██║   ██║██║   ██║██║
    ██║╚██╔╝██║██╔══██║██╔═══╝ ██║     ██╔══╝      ██╔═══╝ ██║   ██║██║   ██║██║
    ██║ ╚═╝ ██║██║  ██║██║     ███████╗███████╗    ██║     ╚██████╔╝╚██████╔╝███████╗
    ╚═╝     ╚═╝╚═╝  ╚═╝╚═╝     ╚══════╝╚══════╝    ╚═╝      ╚═════╝  ╚═════╝ ╚══════╝

*/

contract MaplePool is IMaplePool, ERC20 {

    uint256 public immutable override BOOTSTRAP_MINT;

    address public override asset;    // Underlying ERC-20 asset handled by the ERC-4626 contract.
    address public override manager;  // Address of the contract that manages administrative functionality.

    uint256 private _locked = 1;  // Used when checking for reentrancy.

    constructor(
        address manager_,
        address asset_,
        address destination_,
        uint256 bootstrapMint_,
        uint256 initialSupply_,
        string memory name_,
        string memory symbol_
    )
        ERC20(name_, symbol_, ERC20(asset_).decimals())
    {
        require((manager = manager_) != address(0), "P:C:ZERO_MANAGER");
        require((asset   = asset_)   != address(0), "P:C:ZERO_ASSET");

        if (initialSupply_ != 0) {
            _mint(destination_, initialSupply_);
        }

        BOOTSTRAP_MINT = bootstrapMint_;

        require(ERC20Helper.approve(asset_, manager_, type(uint256).max), "P:C:FAILED_APPROVE");
    }

    /**************************************************************************************************************************************/
    /*** Modifiers                                                                                                                      ***/
    /**************************************************************************************************************************************/

    modifier checkCall(bytes32 functionId_) {
        ( bool success_, string memory errorMessage_ ) = IPoolManagerLike(manager).canCall(functionId_, msg.sender, msg.data[4:]);

        require(success_, errorMessage_);

        _;
    }

    modifier nonReentrant() {
        require(_locked == 1, "P:LOCKED");

        _locked = 2;

        _;

  ...

// [truncated — 62517 bytes total]