Cryo Explorer Ethereum Mainnet

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;

import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "../external/interfaces/CCTPInterfaces.sol";

library CircleDomainIds {
    uint32 public constant Ethereum = 0;
    uint32 public constant Optimism = 2;
    uint32 public constant Arbitrum = 3;
    uint32 public constant Base = 6;
    uint32 public constant Polygon = 7;
    // Use this value for placeholder purposes only for adapters that extend this adapter but haven't yet been
    // assigned a domain ID by Circle.
    uint32 public constant UNINTIALIZED = type(uint32).max;
}

/**
 * @notice Facilitate bridging USDC via Circle's CCTP.
 * @dev This contract is intended to be inherited by other chain-specific adapters and spoke pools.
 * @custom:security-contact [email protected]
 */
abstract contract CircleCCTPAdapter {
    using SafeERC20 for IERC20;

    /**
     * @notice The domain ID that CCTP will transfer funds to.
     * @dev This identifier is assigned by Circle and is not related to a chain ID.
     * @dev Official domain list can be found here: https://developers.circle.com/stablecoins/docs/supported-domains
     */
    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable
    uint32 public immutable recipientCircleDomainId;

    /**
     * @notice The official USDC contract address on this chain.
     * @dev Posted officially here: https://developers.circle.com/stablecoins/docs/usdc-on-main-networks
     */
    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable
    IERC20 public immutable usdcToken;

    /**
     * @notice The official Circle CCTP token bridge contract endpoint.
     * @dev Posted officially here: https://developers.circle.com/stablecoins/docs/evm-smart-contracts
     */
    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable
    ITokenMessenger public immutable cctpTokenMessenger;

    /**
     * @notice intiailizes the CircleCCTPAdapter contract.
     * @param _usdcToken USDC address on the current chain.
     * @param _cctpTokenMessenger TokenMessenger contract to bridge via CCTP. If the zero address is passed, CCTP bridging will be disabled.
     * @param _recipientCircleDomainId The domain ID that CCTP will transfer funds to.
     */
    /// @custom:oz-upgrades-unsafe-allow constructor
    constructor(
        IERC20 _usdcToken,
        ITokenMessenger _cctpTokenMessenger,
        uint32 _recipientCircleDomainId
    ) {
        usdcToken = _usdcToken;
        cctpTokenMessenger = _cctpTokenMessenger;
        recipientCircleDomainId = _recipientCircleDomainId;
    }

    /**
     * @notice converts address to bytes32 (alignment preserving cast.)
     * @param addr the address to convert to bytes32
     * @dev Sourced from the official CCTP repo: https://github.com/walkerq/evm-cctp-contracts/blob/139d8d0ce3b5531d3c7ec284f89d946dfb720016/src/messages/Message.sol#L142C1-L148C6
     */
    function _addressToBytes32(address addr) internal pure returns (bytes32) {
        return bytes32(uint256(uint160(addr)));
    }

    /**
     * @notice Returns whether or not the CCTP bridge is enabled.
     * @dev If the CCTPTokenMessenger is the zero address, CCTP bridging is disabled.
     */
    function _isCCTPEnabled() internal view returns (bool) {
        return address(cctpTokenMessenger) != address(0);
    }

    /**
     * @notice Transfers USDC from the current domain to the given address on the new domain.
     * @dev This function will revert if the CCTP bridge is disabled. I.e. if the zero address is passed to the constructor for the cctpTokenMessenger.
     * @param to Address to receive USDC on the new domain.
     * @param amount Amount of USDC to transfer.
     */
    function _transferUsdc(address to, uint256 amount) internal {
        // Only approve the exact amount to be transferred
        usdcToken.safeIncreaseAllowance(address(cctpTokenMessenger), amount);
        // Submit the amount to be transferred to bridged via the TokenMessenger.
        // If the amount to send exceeds the burn limit per message, then split the message into smaller parts.
        ITokenMinter cctpMinter = cctpTokenMessenger.localMinter();
        uint256 burnLimit = cctpMinter.burnLimitsPerMessage(address(usdcToken));
        uint256 remainingAmount = amount;
        bytes32 recipient = _addressToBytes32(to);
        while (remainingAmount > 0) {
            uint256 partAmount = remainingAmount > burnLimit ? burnLimit : remainingAmount;
            cctpTokenMessenger.depositForBurn(partAmount, recipientCircleDomainId, recipient, address(usdcToken));
            remainingAmount -= partAmount;
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/* Interface Imports */
import { ICrossDomainMessenger } from "@eth-optimism/contracts/libraries/bridge/ICrossDomainMessenger.sol";

/**
 * @title CrossDomainEnabled
 * @custom:security-contact [email protected]
 * @dev Helper contract for contracts performing cross-domain communications between L1 and Optimism.
 * @dev This modifies the eth-optimism/CrossDomainEnabled contract only by changing state variables to be
 * immutable for use in contracts like the Optimism_Adapter which use delegateCall().
 */
contract CrossDomainEnabled {
    // Messenger contract used to send and recieve messages from the other domain.
    address public immutable MESSENGER;

    /**
     * @param _messenger Address of the CrossDomainMessenger on the current layer.
     */
    constructor(address _messenger) {
        MESSENGER = _messenger;
    }

    /**
     * Gets the messenger, usually from storage. This function is exposed in case a child contract
     * needs to override.
     * @return The address of the cross-domain messenger contract which should be used.
     */
    function getCrossDomainMessenger() internal virtual returns (ICrossDomainMessenger) {
        return ICrossDomainMessenger(MESSENGER);
    }

    /**
     * Sends a message to an account on another domain
     * @param _crossDomainTarget The intended recipient on the destination domain
     * @param _gasLimit The gasLimit for the receipt of the message on the target domain.
     * @param _message The data to send to the target (usually calldata to a function with
     *  onlyFromCrossDomainAccount())
     */
    function sendCrossDomainMessage(
        address _crossDomainTarget,
        uint32 _gasLimit,
        bytes calldata _message
    ) internal {
        // slither-disable-next-line reentrancy-events, reentrancy-benign
        getCrossDomainMessenger().sendMessage(_crossDomainTarget, _message, _gasLimit);
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;

import "./interfaces/AdapterInterface.sol";
import "../external/interfaces/WETH9Interface.sol";

// @dev Use local modified CrossDomainEnabled contract instead of one exported by eth-optimism because we need
// this contract's state variables to be `immutable` because of the delegateCall call.
import "./CrossDomainEnabled.sol";
import "@eth-optimism/contracts/L1/messaging/IL1StandardBridge.sol";

import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";

import "../libraries/CircleCCTPAdapter.sol";
import "../external/interfaces/CCTPInterfaces.sol";

/**
 * @notice Contract containing logic to send messages from L1 to World Chain. This is a clone of the Base/Mode adapter
 * @dev Public functions calling external contracts do not guard against reentrancy because they are expected to be
 * called via delegatecall, which will execute this contract's logic within the context of the originating contract.
 * For example, the HubPool will delegatecall these functions, therefore its only necessary that the HubPool's methods
 * that call this contract's logic guard against reentrancy.
 * @custom:security-contact [email protected]
 */

// solhint-disable-next-line contract-name-camelcase
contract WorldChain_Adapter is CrossDomainEnabled, AdapterInterface, CircleCCTPAdapter {
    using SafeERC20 for IERC20;
    uint32 public constant L2_GAS_LIMIT = 200_000;

    WETH9Interface public immutable L1_WETH;

    IL1StandardBridge public immutable L1_STANDARD_BRIDGE;

    /**
     * @notice Constructs new Adapter.
     * @param _l1Weth WETH address on L1.
     * @param _crossDomainMessenger XDomainMessenger World Chain system contract.
     * @param _l1StandardBridge Standard bridge contract.
     * @param _l1Usdc USDC address on L1.
     */
    constructor(
        WETH9Interface _l1Weth,
        address _crossDomainMessenger,
        IL1StandardBridge _l1StandardBridge,
        IERC20 _l1Usdc
    )
        CrossDomainEnabled(_crossDomainMessenger)
        CircleCCTPAdapter(
            _l1Usdc,
            // Hardcode cctp messenger to 0x0 to disable CCTP bridging.
            ITokenMessenger(address(0)),
            CircleDomainIds.UNINTIALIZED
        )
    {
        L1_WETH = _l1Weth;
        L1_STANDARD_BRIDGE = _l1StandardBridge;
    }

    /**
     * @notice Send cross-chain message to target on World Chain.
     * @param target Contract on World Chain that will receive message.
     * @param message Data to send to target.
     */
    function relayMessage(address target, bytes calldata message) external payable override {
        sendCrossDomainMessage(target, L2_GAS_LIMIT, message);
        emit MessageRelayed(target, message);
    }

    /**
     * @notice Bridge tokens to World Chain.
     * @param l1Token L1 token to deposit.
     * @param l2Token L2 token to receive.
     * @param amount Amount of L1 tokens to deposit and L2 tokens to receive.
     * @param to Bridge recipient.
     */
    function relayTokens(
        address l1Token,
        address l2Token,
        uint256 amount,
        address to
    ) external payable override {
        // If the l1Token is weth then unwrap it to ETH then send the ETH to the standard bridge.
        if (l1Token == address(L1_WETH)) {
            L1_WETH.withdraw(amount);
            L1_STANDARD_BRIDGE.depositETHTo{ value: amount }(to, L2_GAS_LIMIT, "");
        }
        // Check if this token is USDC, which requires a custom bridge via CCTP.
        else if (_isCCTPEnabled() && l1Token == address(usdcToken)) {
            _transferUsdc(to, amount);
        } else {
            IL1StandardBridge _l1StandardBridge = L1_STANDARD_BRIDGE;

            IERC20(l1Token).safeIncreaseAllowance(address(_l1StandardBridge), amount);
            _l1StandardBridge.depositERC20To(l1Token, l2Token, to, amount, L2_GAS_LIMIT, "");
        }
        emit TokensRelayed(l1Token, l2Token, amount, to);
    }
}

/**
 * Copyright (C) 2015, 2016, 2017 Dapphub
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity ^0.8.0;

/**
 * Imported as-is from commit 139d8d0ce3b5531d3c7ec284f89d946dfb720016 of:
 *   * https://github.com/walkerq/evm-cctp-contracts/blob/139d8d0ce3b5531d3c7ec284f89d946dfb720016/src/TokenMessenger.sol
 * Changes applied post-import:
 *   * Removed a majority of code from this contract and converted the needed function signatures in this interface.
 */
interface ITokenMessenger {
    /**
     * @notice Deposits and burns tokens from sender to be minted on destination domain.
     * Emits a `DepositForBurn` event.
     * @dev reverts if:
     * - given burnToken is not supported
     * - given destinationDomain has no TokenMessenger registered
     * - transferFrom() reverts. For example, if sender's burnToken balance or approved allowance
     * to this contract is less than `amount`.
     * - burn() reverts. For example, if `amount` is 0.
     * - MessageTransmitter returns false or reverts.
     * @param amount amount of tokens to burn
     * @param destinationDomain destination domain
     * @param mintRecipient address of mint recipient on destination domain
     * @param burnToken address of contract to burn deposited tokens, on local domain
     * @return _nonce unique nonce reserved by message
     */
    function depositForBurn(
        uint256 amount,
        uint32 destinationDomain,
        bytes32 mintRecipient,
        address burnToken
    ) external returns (uint64 _nonce);

    /**
     * @notice Minter responsible for minting and burning tokens on the local domain
     * @dev A TokenMessenger stores a TokenMinter contract which extends the TokenController contract.
     * https://github.com/circlefin/evm-cctp-contracts/blob/817397db0a12963accc08ff86065491577bbc0e5/src/TokenMessenger.sol#L110
     * @return minter Token Minter contract.
     */
    function localMinter() external view returns (ITokenMinter minter);
}

/**
 * A TokenMessenger stores a TokenMinter contract which extends the TokenController contract. The TokenController
 * contract has a burnLimitsPerMessage public mapping which can be queried to find the per-message burn limit
 * for a given token:
 * https://github.com/circlefin/evm-cctp-contracts/blob/817397db0a12963accc08ff86065491577bbc0e5/src/TokenMinter.sol#L33
 * https://github.com/circlefin/evm-cctp-contracts/blob/817397db0a12963accc08ff86065491577bbc0e5/src/roles/TokenController.sol#L69C40-L69C60
 *
 */
interface ITokenMinter {
    /**
     * @notice Supported burnable tokens on the local domain
     * local token (address) => maximum burn amounts per message
     * @param token address of token contract
     * @return burnLimit maximum burn amount per message for token
     */
    function burnLimitsPerMessage(address token) external view returns (uint256);
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;

/**
 * @notice Interface for the WETH9 contract.
 */
interface WETH9Interface {
    /**
     * @notice Burn Wrapped Ether and receive native Ether.
     * @param wad Amount of WETH to unwrap and send to caller.
     */
    function withdraw(uint256 wad) external;

    /**
     * @notice Lock native Ether and mint Wrapped Ether ERC20
     * @dev msg.value is amount of Wrapped Ether to mint/Ether to lock.
     */
    function deposit() external payable;

    /**
     * @notice Get balance of WETH held by `guy`.
     * @param guy Address to get balance of.
     * @return wad Amount of WETH held by `guy`.
     */
    function balanceOf(address guy) external view returns (uint256 wad);

    /**
     * @notice Transfer `wad` of WETH from caller to `guy`.
     * @param guy Address to send WETH to.
     * @param wad Amount of WETH to send.
     * @return ok True if transfer succeeded.
     */
    function transfer(address guy, uint256 wad) external returns (bool);
}

// SPDX-License-Identifier: MIT
pragma solidity >0.5.0 <0.9.0;

/**
 * @title IL1ERC20Bridge
 */
interface IL1ERC20Bridge {
    /**********
     * Events *
     **********/

    event ERC20DepositInitiated(
        address indexed _l1Token,
        address indexed _l2Token,
        address indexed _from,
        address _to,
        uint256 _amount,
        bytes _data
    );

    event ERC20WithdrawalFinalized(
        address indexed _l1Token,
        address indexed _l2Token,
        address indexed _from,
        address _to,
        uint256 _amount,
        bytes _data
    );

    /********************
     * Public Functions *
     ********************/

    /**
     * @dev get the address of the corresponding L2 bridge contract.
     * @return Address of the corresponding L2 bridge contract.
     */
    function l2TokenBridge() external returns (address);

    /**
     * @dev deposit an amount of the ERC20 to the caller's balance on L2.
     * @param _l1Token Address of the L1 ERC20 we are depositing
     * @param _l2Token Address of the L1 respective L2 ERC20
     * @param _amount Amount of the ERC20 to deposit
     * @param _l2Gas Gas limit required to complete the deposit on L2.
     * @param _data Optional data to forward to L2. This data is provided
     *        solely as a convenience for external contracts. Aside from enforcing a maximum
     *        length, these contracts provide no guarantees about its content.
     */
    function depositERC20(
        address _l1Token,
        address _l2Token,
        uint256 _amount,
        uint32 _l2Gas,
        bytes calldata _data
    ) external;

    /**
     * @dev deposit an amount of ERC20 to a recipient's balance on L2.
     * @param _l1Token Address of the L1 ERC20 we are depositing
     * @param _l2Token Address of the L1 respective L2 ERC20
     * @param _to L2 address to credit the withdrawal to.
     * @param _amount Amount of the ERC20 to deposit.
     * @param _l2Gas Gas limit required to complete the deposit on L2.
     * @param _data Optional data to forward to L2. This data is provided
     *        solely as a convenience for external contracts. Aside from enforcing a maximum
     *        length, these contracts provide no guarantees about its content.
     */
    function depositERC20To(
        address _l1Token,
        address _l2Token,
        address _to,
        uint256 _amount,
        uint32 _l2Gas,
        bytes calldata _data
    ) external;

    /*************************
     * Cross-chain Functions *
     *************************/

    /**
     * @dev Complete a withdrawal from L2 to L1, and credit funds to the recipient's balance of the
     * L1 ERC20 token.
     * This call will fail if the initialized withdrawal from L2 has not been finalized.
     *
     * @param _l1Token Address of L1 token to finalizeWithdrawal for.
     * @param _l2Token Address of L2 token where withdrawal was initiated.
     * @param _from L2 address initiating the transfer.
     * @param _to L1 address to credit the withdrawal to.
     * @param _amount Amount of the ERC20 to deposit.
     * @param _data Data provided by the sender on L2. This data is provided
     *   solely as a convenience for external contracts. Aside from enforcing a maximum
     *   length, these contracts provide no guarantees about its content.
     */
    function finalizeERC20Withdrawal(
        address _l1Token,
        address _l2Token,
        address _from,
        address _to,
        uint256 _amount,
        bytes calldata _data
    ) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.3) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
     * Revert on invalid signature.
     */
    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return
            success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token));
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;

/**
 * @notice Sends cross chain messages and tokens to contracts on a specific L2 network.
 * This interface is implemented by an adapter contract that is deployed on L1.
 */

interface AdapterInterface {
    event MessageRelayed(address target, bytes message);

    event TokensRelayed(address l1Token, address l2Token, uint256 amount, address to);

    /**
     * @notice Send message to `target` on L2.
     * @dev This method is marked payable because relaying the message might require a fee
     * to be paid by the sender to forward the message to L2. However, it will not send msg.value
     * to the target contract on L2.
     * @param target L2 address to send message to.
     * @param message Message to send to `target`.
     */
    function relayMessage(address target, bytes calldata message) external payable;

    /**
     * @notice Send `amount` of `l1Token` to `to` on L2. `l2Token` is the L2 address equivalent of `l1Token`.
     * @dev This method is marked payable because relaying the message might require a fee
     * to be paid by the sender to forward the message to L2. However, it will not send msg.value
     * to the target contract on L2.
     * @param l1Token L1 token to bridge.
     * @param l2Token L2 token to receive.
     * @param amount Amount of `l1Token` to bridge.
     * @param to Bridge recipient.
     */
    function relayTokens(
        address l1Token,
        address l2Token,
        uint256 amount,
        address to
    ) external payable;
}

// SPDX-License-Identifier: MIT
pragma solidity >0.5.0 <0.9.0;

import "./IL1ERC20Bridge.sol";

/**
 * @title IL1StandardBridge
 */
interface IL1StandardBridge is IL1ERC20Bridge {
    /**********
     * Events *
     **********/
    event ETHDepositInitiated(
        address indexed _from,
        address indexed _to,
        uint256 _amount,
        bytes _data
    );

    event ETHWithdrawalFinalized(
        address indexed _from,
        address indexed _to,
        uint256 _amount,
        bytes _data
    );

    /********************
     * Public Functions *
     ********************/

    /**
     * @dev Deposit an amount of the ETH to the caller's balance on L2.
     * @param _l2Gas Gas limit required to complete the deposit on L2.
     * @param _data Optional data to forward to L2. This data is provided
     *        solely as a convenience for external contracts. Aside from enforcing a maximum
     *        length, these contracts provide no guarantees about its content.
     */
    function depositETH(uint32 _l2Gas, bytes calldata _data) external payable;

    /**
     * @dev Deposit an amount of ETH to a recipient's balance on L2.
     * @param _to L2 address to credit the withdrawal to.
     * @param _l2Gas Gas limit required to complete the deposit on L2.
     * @param _data Optional data to forward to L2. This data is provided
     *        solely as a convenience for external contracts. Aside from enforcing a maximum
     *        length, these contracts provide no guarantees about its content.
     */
    function depositETHTo(
        address _to,
        uint32 _l2Gas,
        bytes calldata _data
    ) external payable;

    /*************************
     * Cross-chain Functions *
     *************************/

    /**
     * @dev Complete a withdrawal from L2 to L1, and credit funds to the recipient's balance of the
     * L1 ETH token. Since only the xDomainMessenger can call this function, it will never be called
     * before the withdrawal is finalized.
     * @param _from L2 address initiating the transfer.
     * @param _to L1 address to credit the withdrawal to.
     * @param _amount Amount of the ERC20 to deposit.
     * @param _data Optional data to forward to L2. This data is provided
     *        solely as a convenience for external contracts. Aside from enforcing a maximum
     *        length, these contracts provide no guarantees about its content.
     */
    function finalizeETHWithdrawal(
        address _from,
        address _to,
        uint256 _amount,
        bytes calldata _data
    ) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
pragma solidity >0.5.0 <0.9.0;

/**
 * @title ICrossDomainMessenger
 */
interface ICrossDomainMessenger {
    /**********
     * Events *
     **********/

    event SentMessage(
        address indexed target,
        address sender,
        bytes message,
        uint256 messageNonce,
        uint256 gasLimit
    );
    event RelayedMessage(bytes32 indexed msgHash);
    event FailedRelayedMessage(bytes32 indexed msgHash);

    /*************
     * Variables *
     *************/

    function xDomainMessageSender() external view returns (address);

    /********************
     * Public Functions *
     ********************/

    /**
     * Sends a cross domain message to the target messenger.
     * @param _target Target contract address.
     * @param _message Message to send to the target.
     * @param _gasLimit Gas limit for the provided message.
     */
    function sendMessage(
        address _target,
        bytes calldata _message,
        uint32 _gasLimit
    ) external;
}