Cryo Explorer Ethereum Mainnet

pragma solidity ^0.8.7;

interface IRNG {
    function requestRandomNumber() external returns (bytes32);

    function requestRandomNumberWithCallback() external returns (bytes32);

    function isRequestComplete(bytes32 requestId)
        external
        view
        returns (bool isCompleted);

    function randomNumber(bytes32 requestId)
        external
        view
        returns (uint256 randomNum);

    function setAuth(address user, bool grant) external;
}

pragma solidity ^0.8.7;
// SPDX-Licence-Identifier: RIGHT-CLICK-SAVE-ONLY

import "@openzeppelin/contracts/token/ERC721/IERC721.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/access/Ownable.sol";

contract recovery is Ownable {
    // blackhole prevention methods
    function retrieveETH() external onlyOwner {
        (bool sent, ) =
            payable(msg.sender).call{value: address(this).balance}(""); // don't use send or xfer (gas)
        require(sent, "Failed to send Ether");
    }

    function retrieveERC20(address _tracker, uint256 amount)
        external
        onlyOwner
    {
        IERC20(_tracker).transfer(msg.sender, amount);
    }

    function retrieve721(address _tracker, uint256 id) external onlyOwner {
        IERC721(_tracker).transferFrom(address(this), msg.sender, id);
    }
}

pragma solidity ^0.8.7;

interface token_interface {
    struct TKS {
        // Token Kitchen Sink
        uint256 _mintPosition;
        uint256 _ts1;
        uint256 _ts2;
        bool _randomReceived;
        bool _secondReceived;
        uint256 _randomCL;
        uint256 _randomCL2;
        bool _lockTillSaleEnd;
    }

    function setAllowed(address _addr, bool _state) external;

    function permitted(address) external view returns (bool);

    function mintCards(uint256 numberOfCards, address recipient) external;

    function tellEverything() external view returns (TKS memory);

    function tokenPreRevealURI() external view returns (string memory);

    function availableToMint() external view returns (uint256);
}

pragma solidity ^0.8.7;
// SPDX-Licence-Identifier: GPL-3.0-or-later

/*

kkkkkkkOK0kkOXN0kkOXKkkkkkk0WMMM0kXMMMW0kkkkOXMMMNOdoodkXMWWKxoood0WMMMNOkkkk0NMMMW0doookXMWKkkkKMMN0kkkkONXkkkkkkkOK0kkOXMW0xoooxKWMXkkkOXMKkkONXkxkk
........l:...x0;..,Oo......:XMWX:,0MWMK;.....xMM0:.    .,ONx'.    .lXNd,......;kWXl.    .,kNl...oWM0,....'ko........c:...kXl.    .'xNd....dWo..'OKdl;.
;.   .':o,  .x0'  .kl   .,,oN0c'.'kNMMk.     cWNc   ',   :x'  .:.  .xd.  .,'.  '0d   ';.  ,0l   lWMd.     lx;.    ':o,  .xd.  .:.  'Oo    ;Xo  .kW0ocd
Wx.  '0WK,  .x0'  .kl   cNWWK;   .,kMWo   .  ,KX;   dO;..cl.  ;Kd..'dc   lKk;  .xc   oK,  .kl   lWWc  ..  :XMx.  ,0WK,  .xl   lX;  .xo    .xo  .kk..lx
Mk.  '0MK;   ok.  .kl   :KKXO'  .dllNX;  ',  .kX;   c00KXNx.  .x0KXNXc   oXO;  .dc   oNOxxkKc   lWK,  ,,  '0Mk.  ,KMK,  .xl   lX:  .dl     cc  .kO:;;;
Mk.  '0MK,   ..   .kl    ..l0:   ,;.oO'  :l   dWo    ..,lK0,    .':kXc   oXO;  .d:   oMMMMMWc   lWO.  cc  .xMk.  ,KMK,  .xl   lX:  .dl   . .,  .kKo;,,
Mk.  '0MK,   ..   .kl   .''lX0,  .;:xd.  ox.  cNNxc,'.   :X0o;,.   .xc   oXO;  .d:   oMMMMMNc   lWd   dd   lWk.  ,KMK,  .xl   lX:  .dl  .;.    .kMWdc:
Mk.  '0MK,  .oO'  .kl   cXNWWMXo. lNWl   .'   ,0NXXXXd.  'ONXXXK;   c:   lXO;  .dc   oNkooxKc   lNc   ..   ;Xk.  ,KMK,  .xl   lX:  .dl  .o,    .kMWOxo
Mk.  '0MK,  .x0'  .kl   cXNWMMMWKl;kX;        .xo..'kk.  ,o;..lKc   lc   oKk;  .xc   o0,  .kl   l0,        .Ok.  ,KMK,  .xl   lK;  .xo  .kl    .OWNNXc
Mk.  '0MK;  .x0'  .kl   ..'lNMMMMWdxO.  .dk,   ol   .'   :k'  .,.  .xo   ':,.  'Od   .,.  ,0l   lk.  'xx'   dk.  ,KMK,  .xx.  .,.  'Oo  .kO.   .kKdol.
MO,..:KMXc..'kK:..;Od......cXMMMMM0kx,..cXWo...o0o'.....:0Wk;.....'dNKc.      'xNXo'.....;ONo...od'..lNNl...dO,..cXMXc..,kNd'.....,kWd..,ONl...;0WWWNl
MNK00KWMWX00KNWK00KWN000000XWMMMMMWWNKK0XWMN000XWWXOxkkKWMMMN0kxkOXWMMN0dllooxKWWMMXOkkk0NMWX000XX000XMMX000XNK00XWMWX00KNMMXOkkk0NMMNK0KNWX000KNMMMWX

*/

/// @author: galaxis.xyz - The platform for decentralized communities.

import "@openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol";
import "@openzeppelin/contracts/utils/Strings.sol";
import "@openzeppelin/contracts/utils/math/SafeMath.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/introspection/IERC1820Registry.sol";
import "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import "@openzeppelin/contracts/token/ERC777/IERC777Recipient.sol";
import "@openzeppelin/contracts/token/ERC777/IERC777.sol";

import "./ssp/recovery.sol";
import "./ssp/IRNG.sol";

import "./ssp/token_interface.sol";

contract token_configuration {
    string _tokenPreRevealURI;
    uint256 immutable _maxSupply;
    bool _locked;

    constructor(
        string memory tpi,
        uint256 ms,
        bool lock
    ) {
        _tokenPreRevealURI = tpi;
        _maxSupply = ms;
        _locked = lock;
    }
}

contract The_Association_Token is
    ERC721Enumerable,
    token_configuration,
    token_interface,
    Ownable,
    recovery,
    ReentrancyGuard
{
    using Strings for uint256;

    uint256 public immutable projectID;
    IRNG public immutable _iRnd;
    mapping(address => bool) public override permitted;

    bytes32 _reqID;
    bytes32 _secondReq;
    bool _randomReceived;
    bool _secondReceived;
    uint256 _randomCL;
    uint256 _randomCL2;
    string _tokenRevealedBaseURI; // base of URI points to a folder in EtherCards format (see readme)
    uint256 _ts1; // total supply when baseURI set
    uint256 _ts2; // total supply after second reveal (no more minting after this please)
    uint256 public reserved;
    uint256 public constantReserved;
    address projectFactory;

    uint256 public index1;
    uint256 public index2;

    event Allowed(address, bool);
    event Locked(bool);
    event RandomProcessed(
        uint256 stage,
        uint256 randUsed_,
        uint256 _start,
        uint256 _stop,
        uint256 _supply
    );

    modifier onlyAllowed() {
        require(
            permitted[msg.sender] || (msg.sender == owner()),
            "Unauthorised minter"
        );
        _;
    }

    constructor(
        uint256 _projectID,
        IRNG _rng,
        string memory _name,
        string memory _symbol,
        string memory __tokenPreRevealURI,
        uint256 _maxSupply,
        bool __locked,
        address _projectFactory,
        uint256 _reserved
    )
        ERC721(_name, _symbol)
        token_configuration(__tokenPreRevealURI, _maxSupply, __locked)
    {
        projectID = _projectID;
        _iRnd = _rng;
        projectFactory = _projectFactory;
        reserved = _reserved; //1480
        constantReserved = 480;
    }

    function setAllowed(address _addr, bool _state)
        external
        override
        onlyAllowed
    {
        permitted[_addr] = _state;
        emit Allowed(_addr, _state);
    }

    function mintCards(uint256 numberOfCards, address recipient)
        external
        override
        onlyAllowed
    {
        _mintCards(numberOfCards, recipient);
    }

    function batchMint(
        address[] memory recipients,
        uint256[] memory numberOfCards
    ) external onlyAllowed {
        require(recipients.length == numberOfCards.length, "!length");
        uint256 totalLength = recipients.length;
        for (uint256 i = 0; i < totalLength; i++) {
            _mintCards(numberOfCards[i], recipients[i]);
        }
    }

    function _mintCards(uint256 numberOfCards, address recipient) internal {
        uint256 supply = totalSupply();
        require(
            supply + numberOfCards <= _maxSupply - reserved,
            "This would exceed the number of cards available"
        );
        for (uint256 j = 0; j < numberOfCards; j++) {
            _mint(recipient, supply + j + 1);
        }
    }

    function reserveMintCards(uint256 numberOfCards, address recipient)
        external
        onlyAllowed
    {
        uint256 supply = totalSupply();
        require(
            numberOfCards <= reserved,
            "This would exceed the number of cards available"
        );
        reserved = reserved - numberOfCards;
        for (uint256 j = 0; j < numberOfCards; j++) {
            _mint(recipient, supply + j + 1);
        }
    }

    // RANDOMISATION --cut-here-8x------------------------------

    function setRevealedBaseURI(string calldata revealedBaseURI)
        external
        onlyAllowed
    {
        _tokenRevealedBaseURI = revealedBaseURI;
        if (!_randomReceived) _reqID = _iRnd.requestRandomNumberWithCallback();
    }

    uint256 public _start1;
    uint256 _stop1;
    uint256 _start2;

    function resetReveal() external onlyOwner {
        _randomReceived = false;
    }

    function process(uint256 random, bytes32 reqID) external {
        require(msg.sender == address(_iRnd), "Unauthorised RNG");
        if (_reqID == reqID) {
            require(!(_randomReceived), "Random No. already received");
            _randomCL = random / 2; // set msb to zero
            _start1 = _randomCL % (_maxSupply + 1);
            _randomReceived = true;
            _ts1 = totalSupply();
            _stop1 = uri(_ts1);
            emit RandomProcessed(1, _randomCL, _start1, _stop1, _ts1);
        } else revert("Incorrect request ID sent");
    }

    function setPreRevealURI(string memory _pre) external onlyAllowed {
        _tokenPreRevealURI = _pre;
    }

    function uri(uint256 n) public view returns (uint256) {
        if (n <= _ts1) {
            if ((n + _start1) <= _maxSupply) {
                return n + _start1;
            }
            return n + _start1 - _maxSupply;
        } else {
            uint256 range = _maxSupply - _ts1;
            uint256 pos_in_range = 1 + ((n - _ts1 + _randomCL2) % range);

            if ((_stop1 + pos_in_range) <= _maxSupply) {
                //console.log("A");
                return _stop1 + pos_in_range;
            }
            if ((_stop1 + pos_in_range) - _maxSupply <= _start1) {
                //console.log("B");
                return (_stop1 + pos_in_range) - _maxSupply;
            }
            //console.log("C");
            uint256 from_left = (_stop1 + pos_in_range) - _maxSupply + 1;
            return (from_left - _start1) + _stop1;
        }
    }

    function availableToMint() public view override returns (uint256) {
        return _maxSupply - totalSupply() - reserved;
    }

    function setStart1(
        uint256 __start1,
        bool _status,
        string memory _stingSome
    ) external onlyOwner {
        _start1 = __start1;
        _randomReceived = _status;
        _tokenRevealedBaseURI = _stingSome;
        _ts1 = totalSupply();
    }

    function tokenURI(uint256 tokenId)
        public
        view
        override(ERC721)
        returns (string memory)
    {
        require(_exists(tokenId), "Token does not exist");
        string memory revealedBaseURI = _tokenRevealedBaseURI;

        if (!_randomReceived) return _tokenPreRevealURI;
        uint256 newTokenId = uri(tokenId);

        string memory folder = (newTokenId % 100).toString();
        string memory file = newTokenId.toString();
        string memory slash = "/";
        return string(abi.encodePacked(revealedBaseURI, folder, slash, file));
        //
    }

    function tellEverything() external view override returns (TKS memory) {
        return
            TKS(
                totalSupply(),
                _ts1,
                _ts2,
                _randomReceived,
                _secondReceived,
                _randomCL,
                _randomCL2,
                _locked
            );
    }

    function setTransferLock(bool locked) external onlyAllowed {
        _locked = locked;
        emit Locked(locked);
    }

    // Add lock until sellout or unlocked
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 _tokenId
    ) internal override {
        if (from == address(0)) {
            super._beforeTokenTransfer(from, to, _tokenId);
            return;
        }
        require(!_locked, "Transfers are not enabled");
        // this is the fix.
        super._beforeTokenTransfer(from, to, _tokenId);
    }

    function tokenPreRevealURI()
        external
        view
        override
        returns (string memory)
    {
        return _tokenPreRevealURI;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)

pragma solidity ^0.8.0;

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/ERC721.sol)

pragma solidity ^0.8.0;

import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";

/**
 * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
 * the Metadata extension, but not including the Enumerable extension, which is available separately as
 * {ERC721Enumerable}.
 */
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
    using Address for address;
    using Strings for uint256;

    // Token name
    string private _name;

    // Token symbol
    string private _symbol;

    // Mapping from token ID to owner address
    mapping(uint256 => address) private _owners;

    // Mapping owner address to token count
    mapping(address => uint256) private _balances;

    // Mapping from token ID to approved address
    mapping(uint256 => address) private _tokenApprovals;

    // Mapping from owner to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;

    /**
     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC721).interfaceId ||
            interfaceId == type(IERC721Metadata).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC721-balanceOf}.
     */
    function balanceOf(address owner) public view virtual override returns (uint256) {
        require(owner != address(0), "ERC721: balance query for the zero address");
        return _balances[owner];
    }

    /**
     * @dev See {IERC721-ownerOf}.
     */
    function ownerOf(uint256 tokenId) public view virtual override returns (address) {
        address owner = _owners[tokenId];
        require(owner != address(0), "ERC721: owner query for nonexistent token");
        return owner;
    }

    /**
     * @dev See {IERC721Metadata-name}.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev See {IERC721Metadata-symbol}.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev See {IERC721Metadata-tokenURI}.
     */
    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");

        string memory baseURI = _baseURI();
        return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
    }

    /**
     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
     * by default, can be overriden in child contracts.
     */
    function _baseURI() internal view virtual returns (string memory) {
        return "";
    }

    /**
     * @dev See {IERC721-approve}.
     */
    function approve(address to, uint256 tokenId) public virtual override {
        address owner = ERC721.ownerOf(tokenId);
        require(to != owner, "ERC721: approval to current owner");

        require(
            _msgSender() == owner || isApprovedForAll(owner, _msgSender()),
            "ERC721: approve caller is not owner nor approved for all"
        );

        _approve(to, tokenId);
    }

    /**
     * @dev See {IERC721-getApproved}.
     */
    function getApproved(uint256 tokenId) public view virtual override returns (address) {
        require(_exists(tokenId), "ERC721: approved query for nonexistent token");

        return _tokenApprovals[tokenId];
    }

    /**
     * @dev See {IERC721-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        _setApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC721-isApprovedForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[owner][operator];
    }

    /**
     * @dev See {IERC721-transferFrom}.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public virtual override {
        //solhint-disable-next-line max-line-length
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");

        _transfer(from, to, tokenId);
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public virtual override {
        safeTransferFrom(from, to, tokenId, "");
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) public virtual override {
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
        _safeTransfer(from, to, tokenId, _data);
    }

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * `_data` is additional data, it has no specified format and it is sent in call to `to`.
     *
     * This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
     * implement alternative mechanisms to perform token transfer, such as signature-based.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeTransfer(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) internal virtual {
        _transfer(from, to, tokenId);
        require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
    }

    /**
     * @dev Returns whether `tokenId` exists.
     *
     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
     *
     * Tokens start existing when they are minted (`_mint`),
     * and stop existing when they are burned (`_burn`).
     */
    function _exists(uint256 tokenId) internal view virtual returns (bool) {
        return _owners[tokenId] != address(0);
    }

    /**
     * @dev Returns whether `spender` is allowed to manage `tokenId`.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
        require(_exists(tokenId), "ERC721: operator query for nonexistent token");
        address owner = ERC721.ownerOf(tokenId);
        return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
    }

    /**
     * @dev Safely mints `tokenId` and transfers it to `to`.
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeMint(address to, uint256 tokenId) internal virtual {
        _safeMint(to, tokenId, "");
    }

    /**
     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
     */
    function _safeMint(
        address to,
        uint256 tokenId,
        bytes memory _data
    ) internal virtual {
        _mint(to, tokenId);
        require(
            _checkOnERC721Received(address(0), to, tokenId, _data),
            "ERC721: transfer to non ERC721Receiver implementer"
        );
    }

    /**
     * @dev Mints `tokenId` and transfers it to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - `to` cannot be the zero address.
     *
     * Emits a {Transfer} event.
     */
    function _mint(address to, uint256 tokenId) internal virtual {
        require(to != address(0), "ERC721: mint to the zero address");
        require(!_exists(tokenId), "ERC721: token already minted");

        _beforeTokenTransfer(address(0), to, tokenId);

        _balances[to] += 1;
        _owners[tokenId] = to;

        emit Transfer(address(0), to, tokenId);
    }

    /**
     * @dev Destroys `tokenId`.
     * The approval is cleared when the token is burned.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits a {Transfer} event.
     */
    function _burn(uint256 tokenId) internal virtual {
        address owner = ERC721.ownerOf(tokenId);

        _beforeTokenTransfer(owner, address(0), tokenId);

        // Clear approvals
        _approve(address(0), tokenId);

        _balances[owner] -= 1;
        delete _owners[tokenId];

        emit Transfer(owner, address(0), tokenId);
    }

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     *
     * Emits a {Transfer} event.
     */
    function _transfer(
        address from,
        address to,
        uint256 tokenId
    ) internal virtual {
        require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
        require(to != address(0), "ERC721: transfer to the zero address");

        _beforeTokenTransfer(from, to, tokenId);

        // Clear approvals from the previous owner
        _approve(address(0), tokenId);

        _balances[from] -= 1;
        _balances[to] += 1;
        _owners[tokenId] = to;

        emit Transfer(from, to, tokenId);
    }

    /**
     * @dev Approve `to` to operate on `tokenId`
     *
     * Emits a {Approval} event.
     */
    function _approve(address to, uint256 tokenId) internal virtual {
        _tokenApprovals[tokenId] = to;
        emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
    }

    /**
     * @dev Approve `operator` to operate on all of `owner` tokens
     *
     * Emits a {ApprovalForAll} event.
     */
    function _setApprovalForAll(
        address owner,
        address operator,
        bool approved
    ) internal virtual {
        require(owner != operator, "ERC721: approve to caller");
        _operatorApprovals[owner][operator] = approved;
        emit ApprovalForAll(owner, operator, approved);
    }

    /**
     * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
     * The call is not executed if the target address is not a contract.
     *
     * @param from address representing the previous owner of the given token ID
     * @param to target address that will receive the tokens
     * @param tokenId uint256 ID of the token to be transferred
     * @param _data bytes optional data to send along with the call
     * @return bool whether the call correctly returned the expected magic value
     */
    function _checkOnERC721Received(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) private returns (bool) {
        if (to.isContract()) {
            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
                return retval == IERC721Receiver.onERC721Received.selector;
            } catch (bytes memory reason) {
                if (reason.length == 0) {
                    revert("ERC721: transfer to non ERC721Receiver implementer");
                } else {
                    assembly {
                        revert(add(32, reason), mload(reason))
                    }
                }
            }
        } else {
            return true;
        }
    }

    /**
     * @dev Hook that is called before any token transfer. This includes minting
     * and burning.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     * - When `to` is zero, ``from``'s `tokenId` will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 tokenId
    ) internal virtual {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/math/SafeMath.sol)

pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC777/IERC777.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC777Token standard as defined in the EIP.
 *
 * This contract uses the
 * https://eips.ethereum.org/EIPS/eip-1820[ERC1820 registry standard] to let
 * token holders and recipients react to token movements by using setting implementers
 * for the associated interfaces in said registry. See {IERC1820Registry} and
 * {ERC1820Implementer}.
 */
interface IERC777 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the smallest part of the token that is not divisible. This
     * means all token operations (creation, movement and destruction) must have
     * amounts that are a multiple of this number.
     *
     * For most token contracts, this value will equal 1.
     */
    function granularity() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by an account (`owner`).
     */
    function balanceOf(address owner) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * If send or receive hooks are registered for the caller and `recipient`,
     * the corresponding functions will be called with `data` and empty
     * `operatorData`. See {IERC777Sender} and {IERC777Recipient}.
     *
     * Emits a {Sent} event.
     *
     * Requirements
     *
     * - the caller must have at least `amount` tokens.
     * - `recipient` cannot be the zero address.
     * - if `recipient` is a contract, it must implement the {IERC777Recipient}
     * interface.
     */
    function send(
        address recipient,
        uint256 amount,
        bytes calldata data
    ) external;

    /**
     * @dev Destroys `amount` tokens from the caller's account, reducing the
     * total supply.
     *
     * If a send hook is registered for the caller, the corresponding function
     * will be called with `data` and empty `operatorData`. See {IERC777Sender}.
     *
     * Emits a {Burned} event.
     *
     * Requirements
     *
     * - the caller must have at least `amount` tokens.
     */
    function burn(uint256 amount, bytes calldata data) external;

    /**
     * @dev Returns true if an account is an operator of `tokenHolder`.
     * Operators can send and burn tokens on behalf of their owners. All
     * accounts are their own operator.
     *
     * See {operatorSend} and {operatorBurn}.
     */
    function isOperatorFor(address operator, address tokenHolder) external view returns (bool);

    /**
     * @dev Make an account an operator of the caller.
     *
     * See {isOperatorFor}.
     *
     * Emits an {AuthorizedOperator} event.
     *
     * Requirements
     *
     * - `operator` cannot be calling address.
     */
    function authorizeOperator(address operator) external;

    /**
     * @dev Revoke an account's operator status for the caller.
     *
     * See {isOperatorFor} and {defaultOperators}.
     *
     * Emits a {RevokedOperator} event.
     *
     * Requirements
     *
     * - `operator` cannot be calling address.
     */
    function revokeOperator(address operator) external;

    /**
     * @dev Returns the list of default operators. These accounts are operators
     * for all token holders, even if {authorizeOperator} was never called on
     * them.
     *
     * This list is immutable, but individual holders may revoke these via
     * {revokeOperator}, in which case {isOperatorFor} will return false.
     */
    function defaultOperators() external view returns (address[] memory);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient`. The caller must
     * be an operator of `sender`.
     *
     * If send or receive hooks are registered for `sender` and `recipient`,
     * the corresponding functions will be called with `data` and
     * `operatorData`. See {IERC777Sender} and {IERC777Recipient}.
     *
     * Emits a {Sent} event.
     *
     * Requirements
     *
     * - `sender` cannot be the zero address.
     * - `sender` must have at least `amount` tokens.
     * - the caller must be an operator for `sender`.
     * - `recipient` cannot be the zero address.
     * - if `recipient` is a contract, it must implement the {IERC777Recipient}
     * interface.
     */
    function operatorSend(
        address sender,
        address recipient,
        uint256 amount,
        bytes calldata data,
        bytes calldata operatorData
    ) external;

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the total supply.
     * The caller must be an operator of `account`.
     *
     * If a send hook is registered for `account`, the corresponding function
     * will be called with `data` and `operatorData`. See {IERC777Sender}.
     *
     * Emits a {Burned} event.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     * - the caller must be an operator for `account`.
     */
    function operatorBurn(
        address account,
        uint256 amount,
        bytes calldata data,
        bytes calldata operatorData
    ) external;

    event Sent(
        address indexed operator,
        address indexed from,
        address indexed to,
        uint256 amount,
        bytes data,
        bytes operatorData
    );

    event Minted(address indexed operator, address indexed to, uint256 amount, bytes data, bytes operatorData);

    event Burned(address indexed operator, address indexed from, uint256 amount, bytes data, bytes operatorData);

    event AuthorizedOperator(address indexed operator, address indexed tokenHolder);

    event RevokedOperator(address indexed operator, address indexed tokenHolder);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)

pragma solidity ^0.8.0;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC777/IERC777Recipient.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC777TokensRecipient standard as defined in the EIP.
 *
 * Accounts can be notified of {IERC777} tokens being sent to them by having a
 * contract implement this interface (contract holders can be their own
 * implementer) and registering it on the
 * https://eips.ethereum.org/EIPS/eip-1820[ERC1820 global registry].
 *
 * See {IERC1820Registry} and {ERC1820Implementer}.
 */
interface IERC777Recipient {
    /**
     * @dev Called by an {IERC777} token contract whenever tokens are being
     * moved or created into a registered account (`to`). The type of operation
     * is conveyed by `from` being the zero address or not.
     *
     * This call occurs _after_ the token contract's state is updated, so
     * {IERC777-balanceOf}, etc., can be used to query the post-operation state.
     *
     * This function may revert to prevent the operation from being executed.
     */
    function tokensReceived(
        address operator,
        address from,
        address to,
        uint256 amount,
        bytes calldata userData,
        bytes calldata operatorData
    ) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC1820Registry.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the global ERC1820 Registry, as defined in the
 * https://eips.ethereum.org/EIPS/eip-1820[EIP]. Accounts may register
 * implementers for interfaces in this registry, as well as query support.
 *
 * Implementers may be shared by multiple accounts, and can also implement more
 * than a single interface for each account. Contracts can implement interfaces
 * for themselves, but externally-owned accounts (EOA) must delegate this to a
 * contract.
 *
 * {IERC165} interfaces can also be queried via the registry.
 *
 * For an in-depth explanation and source code analysis, see the EIP text.
 */
interface IERC1820Registry {
    /**
     * @dev Sets `newManager` as the manager for `account`. A manager of an
     * account is able to set interface implementers for it.
     *
     * By default, each account is its own manager. Passing a value of `0x0` in
     * `newManager` will reset the manager to this initial state.
     *
     * Emits a {ManagerChanged} event.
     *
     * Requirements:
     *
     * - the caller must be the current manager for `account`.
     */
    function setManager(address account, address newManager) external;

    /**
     * @dev Returns the manager for `account`.
     *
     * See {setManager}.
     */
    function getManager(address account) external view returns (address);

    /**
     * @dev Sets the `implementer` contract as ``account``'s implementer for
     * `interfaceHash`.
     *
     * `account` being the zero address is an alias for the caller's address.
     * The zero address can also be used in `implementer` to remove an old one.
     *
     * See {interfaceHash} to learn how these are created.
     *
     * Emits an {InterfaceImplementerSet} event.
     *
     * Requirements:
     *
     * - the caller must be the current manager for `account`.
     * - `interfaceHash` must not be an {IERC165} interface id (i.e. it must not
     * end in 28 zeroes).
     * - `implementer` must implement {IERC1820Implementer} and return true when
     * queried for support, unless `implementer` is the caller. See
     * {IERC1820Implementer-canImplementInterfaceForAddress}.
     */
    function setInterfaceImplementer(
        address account,
        bytes32 _interfaceHash,
        address implementer
    ) external;

    /**
     * @dev Returns the implementer of `interfaceHash` for `account`. If no such
     * implementer is registered, returns the zero address.
     *
     * If `interfaceHash` is an {IERC165} interface id (i.e. it ends with 28
     * zeroes), `account` will be queried for support of it.
     *
     * `account` being the zero address is an alias for the caller's address.
     */
    function getInterfaceImplementer(address account, bytes32 _interfaceHash) external view returns (address);

    /**
     * @dev Returns the interface hash for an `interfaceName`, as defined in the
     * corresponding
     * https://eips.ethereum.org/EIPS/eip-1820#interface-name[section of the EIP].
     */
    function interfaceHash(string calldata interfaceName) external pure returns (bytes32);

    /**
     * @notice Updates the cache with whether the contract implements an ERC165 interface or not.
     * @param account Address of the contract for which to update the cache.
     * @param interfaceId ERC165 interface for which to update the cache.
     */
    function updateERC165Cache(address account, bytes4 interfaceId) external;

    /**
     * @notice Checks whether a contract implements an ERC165 interface or not.
     * If the result is not cached a direct lookup on the contract address is performed.
     * If the result is not cached or the cached value is out-of-date, the cache MUST be updated manually by calling
     * {updateERC165Cache} with the contract address.
     * @param account Address of the contract to check.
     * @param interfaceId ERC165 interface to check.
     * @return True if `account` implements `interfaceId`, false otherwise.
     */
    function implementsERC165Interface(address account, bytes4 interfaceId) external view returns (bool);

    /**
     * @notice Checks whether a contract implements an ERC165 interface or not without using nor updating the cache.
     * @param account Address of the contract to check.
     * @param interfaceId ERC165 interface to check.
     * @return True if `account` implements `interfaceId`, false otherwise.
     */
    function implementsERC165InterfaceNoCache(address account, bytes4 interfaceId) external view returns (bool);

    event InterfaceImplementerSet(address indexed account, bytes32 indexed interfaceHash, address indexed implementer);

    event ManagerChanged(address indexed account, address indexed newManager);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC721.sol";

/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {
    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/ERC721Enumerable.sol)

pragma solidity ^0.8.0;

import "../ERC721.sol";
import "./IERC721Enumerable.sol";

/**
 * @dev This implements an optional extension of {ERC721} defined in the EIP that adds
 * enumerability of all the token ids in the contract as well as all token ids owned by each
 * account.
 */
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
    // Mapping from owner to list of owned token IDs
    mapping(address => mapping(uint256 => uint256)) private _ownedTokens;

    // Mapping from token ID to index of the owner tokens list
    mapping(uint256 => uint256) private _ownedTokensIndex;

    // Array with all token ids, used for enumeration
    uint256[] private _allTokens;

    // Mapping from token id to position in the allTokens array
    mapping(uint256 => uint256) private _allTokensIndex;

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
        return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
     */
    function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
        require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
        return _ownedTokens[owner][index];
    }

    /**
     * @dev See {IERC721Enumerable-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _allTokens.length;
    }

    /**
     * @dev See {IERC721Enumerable-tokenByIndex}.
     */
    function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
        require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
        return _allTokens[index];
    }

    /**
     * @dev Hook that is called before any token transfer. This includes minting
     * and burning.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     * - When `to` is zero, ``from``'s `tokenId` will be burned.
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 tokenId
    ) internal virtual override {
        super._beforeTokenTransfer(from, to, tokenId);

        if (from == address(0)) {
            _addTokenToAllTokensEnumeration(tokenId);
        } else if (from != to) {
            _removeTokenFromOwnerEnumeration(from, tokenId);
        }
        if (to == address(0)) {
            _removeTokenFromAllTokensEnumeration(tokenId);
        } else if (to != from) {
            _addTokenToOwnerEnumeration(to, tokenId);
        }
    }

    /**
     * @dev Private function to add a token to this extension's ownership-tracking data structures.
     * @param to address representing the new owner of the given token ID
     * @param tokenId uint256 ID of the token to be added to the tokens list of the given address
     */
    function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
        uint256 length = ERC721.balanceOf(to);
        _ownedTokens[to][length] = tokenId;
        _ownedTokensIndex[tokenId] = length;
    }

    /**
     * @dev Private function to add a token to this extension's token tracking data structures.
     * @param tokenId uint256 ID of the token to be added to the tokens list
     */
    function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
        _allTokensIndex[tokenId] = _allTokens.length;
        _allTokens.push(tokenId);
    }

    /**
     * @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
     * while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
     * gas optimizations e.g. when performing a transfer operation (avoiding double writes).
     * This has O(1) time complexity, but alters the order of the _ownedTokens array.
     * @param from address representing the previous owner of the given token ID
     * @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
     */
    function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
        // To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
        // then delete the last slot (swap and pop).

        uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
        uint256 tokenIndex = _ownedTokensIndex[tokenId];

        // When the token to delete is the last token, the swap operation is unnecessary
        if (tokenIndex != lastTokenIndex) {
            uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];

            _ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
            _ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
        }

        // This also deletes the contents at the last position of the array
        delete _ownedTokensIndex[tokenId];
        delete _ownedTokens[from][lastTokenIndex];
    }

    /**
     * @dev Private function to remove a token from this extension's token tracking data structures.
     * This has O(1) time complexity, but alters the order of the _allTokens array.
     * @param tokenId uint256 ID of the token to be removed from the tokens list
     */
    function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
        // To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
        // then delete the last slot (swap and pop).

        uint256 lastTokenIndex = _allTokens.length - 1;
        uint256 tokenIndex = _allTokensIndex[tokenId];

        // When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
        // rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
        // an 'if' statement (like in _removeTokenFromOwnerEnumeration)
        uint256 lastTokenId = _allTokens[lastTokenIndex];

        _allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
        _allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index

        // This also deletes the contents at the last position of the array
        delete _allTokensIndex[tokenId];
        _allTokens.pop();
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Enumerable.sol)

pragma solidity ^0.8.0;

import "../IERC721.sol";

/**
 * @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Enumerable is IERC721 {
    /**
     * @dev Returns the total amount of tokens stored by the contract.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns a token ID owned by `owner` at a given `index` of its token list.
     * Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
     */
    function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);

    /**
     * @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
     * Use along with {totalSupply} to enumerate all tokens.
     */
    function tokenByIndex(uint256 index) external view returns (uint256);
}