Cryo Explorer Ethereum Mainnet

pragma solidity ^0.5.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0, "SafeMath: division by zero");
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b != 0, "SafeMath: modulo by zero");
        return a % b;
    }
}

contract Ownable {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        _owner = msg.sender;
        emit OwnershipTransferred(address(0), _owner);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(isOwner(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Returns true if the caller is the current owner.
     */
    function isOwner() public view returns (bool) {
        return msg.sender == _owner;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * > Note: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public onlyOwner {
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     */
    function _transferOwnership(address newOwner) internal {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

library Roles {
    struct Role {
        mapping (address => bool) bearer;
    }

    /**
     * @dev Give an account access to this role.
     */
    function add(Role storage role, address account) internal {
        require(!has(role, account), "Roles: account already has role");
        role.bearer[account] = true;
    }

    /**
     * @dev Remove an account's access to this role.
     */
    function remove(Role storage role, address account) internal {
        require(has(role, account), "Roles: account does not have role");
        role.bearer[account] = false;
    }

    /**
     * @dev Check if an account has this role.
     * @return bool
     */
    function has(Role storage role, address account) internal view returns (bool) {
        require(account != address(0), "Roles: account is the zero address");
        return role.bearer[account];
    }
}

contract MinterRole {
    using Roles for Roles.Role;

    event MinterAdded(address indexed account);
    event MinterRemoved(address indexed account);

    Roles.Role private _minters;

    constructor () internal {
        _addMinter(msg.sender);
    }

    modifier onlyMinter() {
        require(isMinter(msg.sender), "MinterRole: caller does not have the Minter role");
        _;
    }

    function isMinter(address account) public view returns (bool) {
        return _minters.has(account);
    }

    function addMinter(address account) public onlyMinter {
        _addMinter(account);
    }

    function renounceMinter() public {
        _removeMinter(msg.sender);
    }

    function _addMinter(address account) internal {
        _minters.add(account);
        emit MinterAdded(account);
    }

    function _removeMinter(address account) internal {
        _minters.remove(account);
        emit MinterRemoved(account);
    }
}

interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a `Transfer` event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through `transferFrom`. This is
     * zero by default.
     *
     * This value changes when `approve` or `transferFrom` are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * > Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an `Approval` event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a `Transfer` event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to `approve`. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

contract ERC20 is IERC20 {
    using SafeMath for uint256;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    /**
     * @dev See `IERC20.totalSupply`.
     */
    function totalSupply() public view returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See `IERC20.balanceOf`.
     */
    function balanceOf(address account) public view returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See `IERC20.transfer`.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public returns (bool) {
        _transfer(msg.sender, recipient, amount);
        return true;
    }

    /**
     * @dev See `IERC20.allowance`.
     */
    function allowance(address owner, address spender) public view returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See `IERC20.approve`.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 value) public returns (bool) {
        _approve(msg.sender, spender, value);
        return true;
    }

    /**
     * @dev See `IERC20.transferFrom`.
     *
     * Emits an `Approval` event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of `ERC20`;
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `value`.
     * - the caller must have allowance for `sender`'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, msg.sender, _allowances[sender][msg.sender].sub(amount));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to `approve` that can be used as a mitigation for
     * problems described in `IERC20.approve`.
     *
     * Emits an `Approval` event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
        _approve(msg.sender, spender, _allowances[msg.sender][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to `approve` that can be used as a mitigation for
     * problems described in `IERC20.approve`.
     *
     * Emits an `Approval` event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
        _approve(msg.sender, spender, _allowances[msg.sender][spender].sub(subtractedValue));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to `transfer`, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a `Transfer` event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _balances[sender] = _balances[sender].sub(amount);
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a `Transfer` event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal {
        require(account != address(0), "ERC20: mint to the zero address");

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

     /**
     * @dev Destoys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a `Transfer` event with `to` set to the zero address.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 value) internal {
        require(account != address(0), "ERC20: burn from the zero address");

        _totalSupply = _totalSupply.sub(value);
        _balances[account] = _balances[account].sub(value);
        emit Transfer(account, address(0), value);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
     *
     * This is internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an `Approval` event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 value) internal {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = value;
        emit Approval(owner, spender, value);
    }

    /**
     * @dev Destoys `amount` tokens from `account`.`amount` is then deducted
     * from the caller's allowance.
     *
     * See `_burn` and `_approve`.
     */
    function _burnFrom(address account, uint256 amount) internal {
        _burn(account, amount);
        _approve(account, msg.sender, _allowances[account][msg.sender].sub(amount));
    }
}


contract ERC20Mintable is ERC20, MinterRole {
    /**
     * @dev See `ERC20._mint`.
     *
     * Requirements:
     *
     * - the caller must have the `MinterRole`.
     */
    function mint(address account, uint256 amount) public onlyMinter returns (bool) {
        _mint(account, amount);
        return true;
    }
}


contract ERC20Capped is ERC20Mintable {
    uint256 private _cap;

    /**
     * @dev Sets the value of the `cap`. This value is immutable, it can only be
     * set once during construction.
     */
    constructor (uint256 cap) public {
        require(cap > 0, "ERC20Capped: cap is 0");
        _cap = cap;
    }

    /**
     * @dev Returns the cap on the token's total supply.
     */
    function cap() public view returns (uint256) {
        return _cap;
    }

    /**
     * @dev See `ERC20Mintable.mint`.
     *
     * Requirements:
     *
     * - `value` must not cause the total supply to go over the cap.
     */
    function _mint(address account, uint256 value) internal {
        require(totalSupply().add(value) <= _cap, "ERC20Capped: cap exceeded");
        super._mint(account, value);
    }
}

/**
 * @dev Optional functions from the ERC20 standard.
 */
contract ERC20Detailed is IERC20 {
    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for `name`, `symbol`, and `decimals`. All three of
     * these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name, string memory symbol, uint8 decimals) public {
        _name = name;
        _symbol = symbol;
        _decimals = decimals;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei.
     *
     * > Note that this information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * `IERC20.balanceOf` and `IERC20.transfer`.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }
}

contract PauserRole {
    using Roles for Roles.Role;

    event PauserAdded(address indexed account);
    event PauserRemoved(address indexed account);

    Roles.Role private _pausers;

    constructor () internal {
        _addPauser(msg.sender);
    }

    modifier onlyPauser() {
        require(isPauser(msg.sender), "PauserRole: caller does not have the Pauser role");
        _;
    }

    function isPauser(address account) public view returns (bool) {
        return _pausers.has(account);
    }

    function addPauser(address account) public onlyPauser {
        _addPauser(account);
    }

    function renouncePauser() public {
        _removePauser(msg.sender);
    }

    function _addPauser(address account) internal {
        _pausers.add(account);
        emit PauserAdded(account);
    }

    function _removePauser(address account) internal {
        _pausers.remove(account);
        emit PauserRemoved(account);
    }
}

contract Pausable is PauserRole {
    /**
     * @dev Emitted when the pause is triggered by a pauser (`account`).
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by a pauser (`account`).
     */
    event Unpaused(address account);

    bool private _paused;

    /**
     * @dev Initializes the contract in unpaused state. Assigns the Pauser role
     * to the deployer.
     */
    constructor () internal {
        _paused = false;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view returns (bool) {
        return _paused;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     */
    modifier whenNotPaused() {
        require(!_paused, "Pausable: paused");
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     */
    modifier whenPaused() {
        require(_paused, "Pausable: not paused");
        _;
    }

    /**
     * @dev Called by a pauser to pause, triggers stopped state.
     */
    function pause() public onlyPauser whenNotPaused {
        _paused = true;
        emit Paused(msg.sender);
    }

    /**
     * @dev Called by a pauser to unpause, returns to normal state.
     */
    function unpause() public onlyPauser whenPaused {
        _paused = false;
        emit Unpaused(msg.sender);
    }
}

contract ERC20Pausable is ERC20, Pausable {
    function transfer(address to, uint256 value) public whenNotPaused returns (bool) {
        return super.transfer(to, value);
    }

    function transferFrom(address from, address to, uint256 value) public whenNotPaused returns (bool) {
        return super.transferFrom(from, to, value);
    }

    function approve(address spender, uint256 value) public whenNotPaused returns (bool) {
        return super.approve(spender, value);
    }

    function increaseAllowance(address spender, uint addedValue) public whenNotPaused returns (bool) {
        return super.increaseAllowance(spender, addedValue);
    }

    function decreaseAllowance(address spender, uint subtractedValue) public whenNotPaused returns (bool) {
        return super.decreaseAllowance(spender, subtractedValue);
    }
}


contract Pngcoin is ERC20Capped, ERC20Detailed, Pausable, Ownable {

	string public _name = "Pngcoin";
	string public _symbol = "PNG";
	uint8 public _decimals = 18;
	uint256 private _initialSupply = 665000000; // 665,000,000

    uint256 _cap = 1192258185 * (10 ** uint256(_decimals)); // cap of 1,192,258,185

    event Checkpoint(uint256 data);

	constructor() ERC20Capped(_cap) ERC20Detailed(_name, _symbol, _decimals) public {
		_mint(msg.sender, _initialSupply * (10 ** uint256(decimals())));
	}

    function transfer(address _to, uint256 _value) public whenNotPaused returns (bool) {
        return super.transfer(_to, _value);
    }	

    function transferFrom(address _from, address _to, uint256 _value) public whenNotPaused returns (bool) {
        return super.transferFrom(_from, _to, _value);
    }
    
    function approve(address _spender, uint256 _value) public whenNotPaused returns (bool) {
        return super.approve(_spender, _value);
    }

    function checkpoint(uint256 checkpointData) public {
        emit Checkpoint(checkpointData);
    }

}