Cryo Explorer Ethereum Mainnet

// File: contracts/ErrorReporter.sol

pragma solidity ^0.5.16;

contract ComptrollerErrorReporter {
    enum Error {
        NO_ERROR,
        UNAUTHORIZED,
        COMPTROLLER_MISMATCH,
        INSUFFICIENT_SHORTFALL,
        INSUFFICIENT_LIQUIDITY,
        INVALID_CLOSE_FACTOR,
        INVALID_COLLATERAL_FACTOR,
        INVALID_LIQUIDATION_INCENTIVE,
        MARKET_NOT_ENTERED, // no longer possible
        MARKET_NOT_LISTED,
        MARKET_ALREADY_LISTED,
        MATH_ERROR,
        NONZERO_BORROW_BALANCE,
        PRICE_ERROR,
        REJECTION,
        SNAPSHOT_ERROR,
        TOO_MANY_ASSETS,
        TOO_MUCH_REPAY
    }

    enum FailureInfo {
        ACCEPT_ADMIN_PENDING_ADMIN_CHECK,
        ACCEPT_PENDING_IMPLEMENTATION_ADDRESS_CHECK,
        EXIT_MARKET_BALANCE_OWED,
        EXIT_MARKET_REJECTION,
        SET_CLOSE_FACTOR_OWNER_CHECK,
        SET_CLOSE_FACTOR_VALIDATION,
        SET_COLLATERAL_FACTOR_OWNER_CHECK,
        SET_COLLATERAL_FACTOR_NO_EXISTS,
        SET_COLLATERAL_FACTOR_VALIDATION,
        SET_COLLATERAL_FACTOR_WITHOUT_PRICE,
        SET_IMPLEMENTATION_OWNER_CHECK,
        SET_LIQUIDATION_INCENTIVE_OWNER_CHECK,
        SET_LIQUIDATION_INCENTIVE_VALIDATION,
        SET_MAX_ASSETS_OWNER_CHECK,
        SET_PENDING_ADMIN_OWNER_CHECK,
        SET_PENDING_IMPLEMENTATION_OWNER_CHECK,
        SET_PRICE_ORACLE_OWNER_CHECK,
        SUPPORT_MARKET_EXISTS,
        SUPPORT_MARKET_OWNER_CHECK,
        SET_PAUSE_GUARDIAN_OWNER_CHECK
    }

    /**
      * @dev `error` corresponds to enum Error; `info` corresponds to enum FailureInfo, and `detail` is an arbitrary
      * contract-specific code that enables us to report opaque error codes from upgradeable contracts.
      **/
    event Failure(uint error, uint info, uint detail);

    /**
      * @dev use this when reporting a known error from the money market or a non-upgradeable collaborator
      */
    function fail(Error err, FailureInfo info) internal returns (uint) {
        emit Failure(uint(err), uint(info), 0);

        return uint(err);
    }

    /**
      * @dev use this when reporting an opaque error from an upgradeable collaborator contract
      */
    function failOpaque(Error err, FailureInfo info, uint opaqueError) internal returns (uint) {
        emit Failure(uint(err), uint(info), opaqueError);

        return uint(err);
    }
}

contract TokenErrorReporter {
    enum Error {
        NO_ERROR,
        UNAUTHORIZED,
        BAD_INPUT,
        COMPTROLLER_REJECTION,
        COMPTROLLER_CALCULATION_ERROR,
        INTEREST_RATE_MODEL_ERROR,
        INVALID_ACCOUNT_PAIR,
        INVALID_CLOSE_AMOUNT_REQUESTED,
        INVALID_COLLATERAL_FACTOR,
        MATH_ERROR,
        MARKET_NOT_FRESH,
        MARKET_NOT_LISTED,
        TOKEN_INSUFFICIENT_ALLOWANCE,
        TOKEN_INSUFFICIENT_BALANCE,
        TOKEN_INSUFFICIENT_CASH,
        TOKEN_TRANSFER_IN_FAILED,
        TOKEN_TRANSFER_OUT_FAILED
    }

    /*
     * Note: FailureInfo (but not Error) is kept in alphabetical order
     *       This is because FailureInfo grows significantly faster, and
     *       the order of Error has some meaning, while the order of FailureInfo
     *       is entirely arbitrary.
     */
    enum FailureInfo {
        ACCEPT_ADMIN_PENDING_ADMIN_CHECK,
        ACCRUE_INTEREST_ACCUMULATED_INTEREST_CALCULATION_FAILED,
        ACCRUE_INTEREST_BORROW_RATE_CALCULATION_FAILED,
        ACCRUE_INTEREST_NEW_BORROW_INDEX_CALCULATION_FAILED,
        ACCRUE_INTEREST_NEW_TOTAL_BORROWS_CALCULATION_FAILED,
        ACCRUE_INTEREST_NEW_TOTAL_RESERVES_CALCULATION_FAILED,
        ACCRUE_INTEREST_SIMPLE_INTEREST_FACTOR_CALCULATION_FAILED,
        BORROW_ACCUMULATED_BALANCE_CALCULATION_FAILED,
        BORROW_ACCRUE_INTEREST_FAILED,
        BORROW_CASH_NOT_AVAILABLE,
        BORROW_FRESHNESS_CHECK,
        BORROW_NEW_TOTAL_BALANCE_CALCULATION_FAILED,
        BORROW_NEW_ACCOUNT_BORROW_BALANCE_CALCULATION_FAILED,
        BORROW_MARKET_NOT_LISTED,
        BORROW_COMPTROLLER_REJECTION,
        LIQUIDATE_ACCRUE_BORROW_INTEREST_FAILED,
        LIQUIDATE_ACCRUE_COLLATERAL_INTEREST_FAILED,
        LIQUIDATE_COLLATERAL_FRESHNESS_CHECK,
        LIQUIDATE_COMPTROLLER_REJECTION,
        LIQUIDATE_COMPTROLLER_CALCULATE_AMOUNT_SEIZE_FAILED,
        LIQUIDATE_CLOSE_AMOUNT_IS_UINT_MAX,
        LIQUIDATE_CLOSE_AMOUNT_IS_ZERO,
        LIQUIDATE_FRESHNESS_CHECK,
        LIQUIDATE_LIQUIDATOR_IS_BORROWER,
        LIQUIDATE_REPAY_BORROW_FRESH_FAILED,
        LIQUIDATE_SEIZE_BALANCE_INCREMENT_FAILED,
        LIQUIDATE_SEIZE_BALANCE_DECREMENT_FAILED,
        LIQUIDATE_SEIZE_COMPTROLLER_REJECTION,
        LIQUIDATE_SEIZE_LIQUIDATOR_IS_BORROWER,
        LIQUIDATE_SEIZE_TOO_MUCH,
        MINT_ACCRUE_INTEREST_FAILED,
        MINT_COMPTROLLER_REJECTION,
        MINT_EXCHANGE_CALCULATION_FAILED,
        MINT_EXCHANGE_RATE_READ_FAILED,
        MINT_FRESHNESS_CHECK,
        MINT_NEW_ACCOUNT_BALANCE_CALCULATION_FAILED,
        MINT_NEW_TOTAL_SUPPLY_CALCULATION_FAILED,
        MINT_TRANSFER_IN_FAILED,
        MINT_TRANSFER_IN_NOT_POSSIBLE,
        REDEEM_ACCRUE_INTEREST_FAILED,
        REDEEM_COMPTROLLER_REJECTION,
        REDEEM_EXCHANGE_TOKENS_CALCULATION_FAILED,
        REDEEM_EXCHANGE_AMOUNT_CALCULATION_FAILED,
        REDEEM_EXCHANGE_RATE_READ_FAILED,
        REDEEM_FRESHNESS_CHECK,
        REDEEM_NEW_ACCOUNT_BALANCE_CALCULATION_FAILED,
        REDEEM_NEW_TOTAL_SUPPLY_CALCULATION_FAILED,
        REDEEM_TRANSFER_OUT_NOT_POSSIBLE,
        REDUCE_RESERVES_ACCRUE_INTEREST_FAILED,
        REDUCE_RESERVES_ADMIN_CHECK,
        REDUCE_RESERVES_CASH_NOT_AVAILABLE,
        REDUCE_RESERVES_FRESH_CHECK,
        REDUCE_RESERVES_VALIDATION,
        REPAY_BEHALF_ACCRUE_INTEREST_FAILED,
        REPAY_BORROW_ACCRUE_INTEREST_FAILED,
        REPAY_BORROW_ACCUMULATED_BALANCE_CALCULATION_FAILED,
        REPAY_BORROW_COMPTROLLER_REJECTION,
        REPAY_BORROW_FRESHNESS_CHECK,
        REPAY_BORROW_NEW_ACCOUNT_BORROW_BALANCE_CALCULATION_FAILED,
        REPAY_BORROW_NEW_TOTAL_BALANCE_CALCULATION_FAILED,
        REPAY_BORROW_TRANSFER_IN_NOT_POSSIBLE,
        SET_COLLATERAL_FACTOR_OWNER_CHECK,
        SET_COLLATERAL_FACTOR_VALIDATION,
        SET_COMPTROLLER_OWNER_CHECK,
        SET_INTEREST_RATE_MODEL_ACCRUE_INTEREST_FAILED,
        SET_INTEREST_RATE_MODEL_FRESH_CHECK,
        SET_INTEREST_RATE_MODEL_OWNER_CHECK,
        SET_MAX_ASSETS_OWNER_CHECK,
        SET_ORACLE_MARKET_NOT_LISTED,
        SET_PENDING_ADMIN_OWNER_CHECK,
        SET_RESERVE_FACTOR_ACCRUE_INTEREST_FAILED,
        SET_RESERVE_FACTOR_ADMIN_CHECK,
        SET_RESERVE_FACTOR_FRESH_CHECK,
        SET_RESERVE_FACTOR_BOUNDS_CHECK,
        TRANSFER_COMPTROLLER_REJECTION,
        TRANSFER_NOT_ALLOWED,
        TRANSFER_NOT_ENOUGH,
        TRANSFER_TOO_MUCH,
        ADD_RESERVES_ACCRUE_INTEREST_FAILED,
        ADD_RESERVES_FRESH_CHECK,
        ADD_RESERVES_TRANSFER_IN_NOT_POSSIBLE
    }

    /**
      * @dev `error` corresponds to enum Error; `info` corresponds to enum FailureInfo, and `detail` is an arbitrary
      * contract-specific code that enables us to report opaque error codes from upgradeable contracts.
      **/
    event Failure(uint error, uint info, uint detail);

    /**
      * @dev use this when reporting a known error from the money market or a non-upgradeable collaborator
      */
    function fail(Error err, FailureInfo info) internal returns (uint) {
        emit Failure(uint(err), uint(info), 0);

        return uint(err);
    }

    /**
      * @dev use this when reporting an opaque error from an upgradeable collaborator contract
      */
    function failOpaque(Error err, FailureInfo info, uint opaqueError) internal returns (uint) {
        emit Failure(uint(err), uint(info), opaqueError);

        return uint(err);
    }
}

// File: contracts/ComptrollerInterface.sol

pragma solidity ^0.5.16;

contract ComptrollerInterface {
    /// @notice Indicator that this is a Comptroller contract (for inspection)
    bool public constant isComptroller = true;

    /*** Assets You Are In ***/

    function enterMarkets(address[] calldata slTokens) external returns (uint[] memory);
    function exitMarket(address slToken) external returns (uint);

    /*** Policy Hooks ***/

    function mintAllowed(address slToken, address minter, uint mintAmount) external returns (uint);
    function mintVerify(address slToken, address minter, uint mintAmount, uint mintTokens) external;

    function redeemAllowed(address slToken, address redeemer, uint redeemTokens) external returns (uint);
    function redeemVerify(address slToken, address redeemer, uint redeemAmount, uint redeemTokens) external;

    function borrowAllowed(address slToken, address borrower, uint borrowAmount) external returns (uint);
    function borrowVerify(address slToken, address borrower, uint borrowAmount) external;

    function repayBorrowAllowed(
        address slToken,
        address payer,
        address borrower,
        uint repayAmount) external returns (uint);
    function repayBorrowVerify(
        address slToken,
        address payer,
        address borrower,
        uint repayAmount,
        uint borrowerIndex) external;

    function liquidateBorrowAllowed(
        address slTokenBorrowed,
        address slTokenCollateral,
        address liquidator,
        address borrower,
        uint repayAmount) external returns (uint);
    function liquidateBorrowVerify(
        address slTokenBorrowed,
        address slTokenCollateral,
        address liquidator,
        address borrower,
        uint repayAmount,
        uint seizeTokens) external;

    function seizeAllowed(
        address slTokenCollateral,
        address slTokenBorrowed,
        address liquidator,
        address borrower,
        uint seizeTokens) external returns (uint);
    function seizeVerify(
        address slTokenCollateral,
        address slTokenBorrowed,
        address liquidator,
        address borrower,
        uint seizeTokens) external;

    function transferAllowed(address slToken, address src, address dst, uint transferTokens) external returns (uint);
    function transferVerify(address slToken, address src, address dst, uint transferTokens) external;

    /*** Liquidity/Liquidation Calculations ***/

    function liquidateCalculateSeizeTokens(
        address slTokenBorrowed,
        address slTokenCollateral,
        uint repayAmount) external view returns (uint, uint);
}

// File: contracts/InterestRateModel.sol

pragma solidity ^0.5.16;

/**
  * @title Compound's InterestRateModel Interface
  * @author Compound
  */
contract InterestRateModel {
    /// @notice Indicator that this is an InterestRateModel contract (for inspection)
    bool public constant isInterestRateModel = true;

    /**
      * @notice Calculates the current borrow interest rate per block
      * @param cash The total amount of cash the market has
      * @param borrows The total amount of borrows the market has outstanding
      * @param reserves The total amount of reserves the market has
      * @return The borrow rate per block (as a percentage, and scaled by 1e18)
      */
    function getBorrowRate(uint cash, uint borrows, uint reserves) external view returns (uint);

    /**
      * @notice Calculates the current supply interest rate per block
      * @param cash The total amount of cash the market has
      * @param borrows The total amount of borrows the market has outstanding
      * @param reserves The total amount of reserves the market has
      * @param reserveFactorMantissa The current reserve factor the market has
      * @return The supply rate per block (as a percentage, and scaled by 1e18)
      */
    function getSupplyRate(uint cash, uint borrows, uint reserves, uint reserveFactorMantissa) external view returns (uint);

}

// File: contracts/SLTokenInterfaces.sol

pragma solidity ^0.5.16;



contract SLTokenStorage {
    /**
     * @dev Guard variable for re-entrancy checks
     */
    bool internal _notEntered;

    /**
     * @notice EIP-20 token name for this token
     */
    string public name;

    /**
     * @notice EIP-20 token symbol for this token
     */
    string public symbol;

    /**
     * @notice EIP-20 token decimals for this token
     */
    uint8 public decimals;

    /**
     * @notice Maximum borrow rate that can ever be applied (.0005% / block)
     */

    uint internal constant borrowRateMaxMantissa = 0.0005e16;

    /**
     * @notice Maximum fraction of interest that can be set aside for reserves
     */
    uint internal constant reserveFactorMaxMantissa = 1e18;

    /**
     * @notice Administrator for this contract
     */
    address payable public admin;

    /**
     * @notice Pending administrator for this contract
     */
    address payable public pendingAdmin;

    /**
     * @notice Contract which oversees inter-slToken operations
     */
    ComptrollerInterface public comptroller;

    /**
     * @notice Model which tells what the current interest rate should be
     */
    InterestRateModel public interestRateModel;

    /**
     * @notice Initial exchange rate used when minting the first SLTokens (used when totalSupply = 0)
     */
    uint internal initialExchangeRateMantissa;

    /**
     * @notice Fraction of interest currently set aside for reserves
     */
    uint public reserveFactorMantissa;

    /**
     * @notice Block number that interest was last accrued at
     */
    uint public accrualBlockNumber;

    /**
     * @notice Accumulator of the total earned interest rate since the opening of the market
     */
    uint public borrowIndex;

    /**
     * @notice Total amount of outstanding borrows of the underlying in this market
     */
    uint public totalBorrows;

    /**
     * @notice Total amount of reserves of the underlying held in this market
     */
    uint public totalReserves;

    /**
     * @notice Total number of tokens in circulation
     */
    uint public totalSupply;

    /**
     * @notice Official record of token balances for each account
     */
    mapping (address => uint) internal accountTokens;

    /**
     * @notice Approved token transfer amounts on behalf of others
     */
    mapping (address => mapping (address => uint)) internal transferAllowances;

    /**
     * @notice Container for borrow balance information
     * @member principal Total balance (with accrued interest), after applying the most recent balance-changing action
     * @member interestIndex Global borrowIndex as of the most recent balance-changing action
     */
    struct BorrowSnapshot {
        uint principal;
        uint interestIndex;
    }

    /**
     * @notice Mapping of account addresses to outstanding borrow balances
     */
    mapping(address => BorrowSnapshot) internal accountBorrows;
}

contract SLTokenInterface is SLTokenStorage {
    /**
     * @notice Indicator that this is a SLToken contract (for inspection)
     */
    bool public constant isSLToken = true;


    /*** Market Events ***/

    /**
     * @notice Event emitted when interest is accrued
     */
    event AccrueInterest(uint cashPrior, uint interestAccumulated, uint borrowIndex, uint totalBorrows);

    /**
     * @notice Event emitted when tokens are minted
     */
    event Mint(address minter, uint mintAmount, uint mintTokens);

    /**
     * @notice Event emitted when tokens are redeemed
     */
    event Redeem(address redeemer, uint redeemAmount, uint redeemTokens);

    /**
     * @notice Event emitted when underlying is borrowed
     */
    event Borrow(address borrower, uint borrowAmount, uint accountBorrows, uint totalBorrows);

    /**
     * @notice Event emitted when a borrow is repaid
     */
    event RepayBorrow(address payer, address borrower, uint repayAmount, uint accountBorrows, uint totalBorrows);

    /**
     * @notice Event emitted when a borrow is liquidated
     */
    event LiquidateBorrow(address liquidator, address borrower, uint repayAmount, address slTokenCollateral, uint seizeTokens);


    /*** Admin Events ***/

    /**
     * @notice Event emitted when pendingAdmin is changed
     */
    event NewPendingAdmin(address oldPendingAdmin, address newPendingAdmin);

    /**
     * @notice Event emitted when pendingAdmin is accepted, which means admin is updated
     */
    event NewAdmin(address oldAdmin, address newAdmin);

    /**
     * @notice Event emitted when comptroller is changed
     */
    event NewComptroller(ComptrollerInterface oldComptroller, ComptrollerInterface newComptroller);

    /**
     * @notice Event emitted when interestRateModel is changed
     */
    event NewMarketInterestRateModel(InterestRateModel oldInterestRateModel, InterestRateModel newInterestRateModel);

    /**
     * @notice Event emitted when the reserve factor is changed
     */
    event NewReserveFactor(uint oldReserveFactorMantissa, uint newReserveFactorMantissa);

    /**
     * @notice Event emitted when the reserves are added
     */
    event ReservesAdded(address benefactor, uint addAmount, uint newTotalReserves);

    /**
     * @notice Event emitted when the reserves are reduced
     */
    event ReservesReduced(address admin, uint reduceAmount, uint newTotalReserves);

    /**
     * @notice EIP20 Transfer event
     */
    event Transfer(address indexed from, address indexed to, uint amount);

    /**
     * @notice EIP20 Approval event
     */
    event Approval(address indexed owner, address indexed spender, uint amount);

    /**
     * @notice Failure event
     */
    event Failure(uint error, uint info, uint detail);


    /*** User Interface ***/

    function transfer(address dst, uint amount) external returns (bool);
    function transferFrom(address src, address dst, uint amount) external returns (bool);
    function approve(address spender, uint amount) external returns (bool);
    function allowance(address owner, address spender) external view returns (uint);
    function balanceOf(address owner) external view returns (uint);
    function balanceOfUnderlying(address owner) external returns (uint);
    function getAccountSnapshot(address account) external view returns (uint, uint, uint, uint);
    function borrowRatePerBlock() external view returns (uint);
    function supplyRatePerBlock() external view returns (uint);
    function totalBorrowsCurrent() external returns (uint);
    function borrowBalanceCurrent(address account) external returns (uint);
    function borrowBalanceStored(address account) public view returns (uint);
    function exchangeRateCurrent() public returns (uint);
    function exchangeRateStored() public view returns (uint);
    function getCash() external view returns (uint);
    function accrueInterest() public returns (uint);
    function seize(address liquidator, address borrower, uint seizeTokens) external returns (uint);


    /*** Admin Functions ***/

    function _setPendingAdmin(address payable newPendingAdmin) external returns (uint);
    function _acceptAdmin() external returns (uint);
    function _setComptroller(ComptrollerInterface newComptroller) public returns (uint);
    function _setReserveFactor(uint newReserveFactorMantissa) external returns (uint);
    function _reduceReserves(uint reduceAmount) external returns (uint);
    function _setInterestRateModel(InterestRateModel newInterestRateModel) public returns (uint);
}

contract SLErc20Storage {
    /**
     * @notice Underlying asset for this SLToken
     */
    address public underlying;
}

contract SLErc20Interface is SLErc20Storage {

    /*** User Interface ***/

    function mint(uint mintAmount) external returns (uint);
    function redeem(uint redeemTokens) external returns (uint);
    function redeemUnderlying(uint redeemAmount) external returns (uint);
    function borrow(uint borrowAmount) external returns (uint);
    function repayBorrow(uint repayAmount) external returns (uint);
    function repayBorrowBehalf(address borrower, uint repayAmount) external returns (uint);
    function liquidateBorrow(address borrower, uint repayAmount, SLTokenInterface slTokenCollateral) external returns (uint);


    /*** Admin Functions ***/

    function _addReserves(uint addAmount) external returns (uint);
}

contract SLDelegationStorage {
    /**
     * @notice Implementation address for this contract
     */
    address public implementation;
}

contract SLDelegatorInterface is SLDelegationStorage {
    /**
     * @notice Emitted when implementation is changed
     */
    event NewImplementation(address oldImplementation, address newImplementation);

    /**
     * @notice Called by the admin to update the implementation of the delegator
     * @param implementation_ The address of the new implementation for delegation
     * @param allowResign Flag to indicate whether to call _resignImplementation on the old implementation
     * @param becomeImplementationData The encoded bytes data to be passed to _becomeImplementation
     */
    function _setImplementation(address implementation_, bool allowResign, bytes memory becomeImplementationData) public;
}

contract SLDelegateInterface is SLDelegationStorage {
    /**
     * @notice Called by the delegator on a delegate to initialize it for duty
     * @dev Should revert if any issues arise which make it unfit for delegation
     * @param data The encoded bytes data for any initialization
     */
    function _becomeImplementation(bytes memory data) public;

    /**
     * @notice Called by the delegator on a delegate to forfeit its responsibility
     */
    function _resignImplementation() public;
}

// File: contracts/CarefulMath.sol

pragma solidity ^0.5.16;

/**
  * @title Careful Math
  * @author Compound
  * @notice Derived from OpenZeppelin's SafeMath library
  *         https://github.com/OpenZeppelin/openzeppelin-solidity/blob/master/contracts/math/SafeMath.sol
  */
contract CarefulMath {

    /**
     * @dev Possible error codes that we can return
     */
    enum MathError {
        NO_ERROR,
        DIVISION_BY_ZERO,
        INTEGER_OVERFLOW,
        INTEGER_UNDERFLOW
    }

    /**
    * @dev Multiplies two numbers, returns an error on overflow.
    */
    function mulUInt(uint a, uint b) internal pure returns (MathError, uint) {
        if (a == 0) {
            return (MathError.NO_ERROR, 0);
        }

        uint c = a * b;

        if (c / a != b) {
            return (MathError.INTEGER_OVERFLOW, 0);
        } else {
            return (MathError.NO_ERROR, c);
        }
    }

    /**
    * @dev Integer division of two numbers, truncating the quotient.
    */
    function divUInt(uint a, uint b) internal pure returns (MathError, uint) {
        if (b == 0) {
            return (MathError.DIVISION_BY_ZERO, 0);
        }

        return (MathError.NO_ERROR, a / b);
    }

    /**
    * @dev Subtracts two numbers, returns an error on overflow (i.e. if subtrahend is greater than minuend).
    */
    function subUInt(uint a, uint b) internal pure returns (MathError, uint) {
        if (b <= a) {
            return (MathError.NO_ERROR, a - b);
        } else {
            return (MathError.INTEGER_UNDERFLOW, 0);
        }
    }

    /**
    * @dev Adds two numbers, returns an error on overflow.
    */
    function addUInt(uint a, uint b) internal pure returns (MathError, uint) {
        uint c = a + b;

        if (c >= a) {
            return (MathError.NO_ERROR, c);
        } else {
            return (MathError.INTEGER_OVERFLOW, 0);
        }
    }

    /**
    * @dev add a and b and then subtract c
    */
    function addThenSubUInt(uint a, uint b, uint c) internal pure returns (MathError, uint) {
        (MathError err0, uint sum) = addUInt(a, b);

        if (err0 != MathError.NO_ERROR) {
            return (err0, 0);
        }

        return subUInt(sum, c);
    }
}

// File: contracts/Exponential.sol

pragma solidity ^0.5.16;


/**
 * @title Exponential module for storing fixed-precision decimals
 * @author Compound
 * @notice Exp is a struct which stores decimals with a fixed precision of 18 decimal places.
 *         Thus, if we wanted to store the 5.1, mantissa would store 5.1e18. That is:
 *         `Exp({mantissa: 5100000000000000000})`.
 */
contract Exponential is CarefulMath {
    uint constant expScale = 1e18;
    uint constant doubleScale = 1e36;
    uint constant halfExpScale = expScale/2;
    uint constant mantissaOne = expScale;

    struct Exp {
        uint mantissa;
    }

    struct Double {
        uint mantissa;
    }

    /**
     * @dev Creates an exponential from numerator and denominator values.
     *      Note: Returns an error if (`num` * 10e18) > MAX_INT,
     *            or if `denom` is zero.
     */
    function getExp(uint num, uint denom) pure internal returns (MathError, Exp memory) {
        (MathError err0, uint scaledNumerator) = mulUInt(num, expScale);
        if (err0 != MathError.NO_ERROR) {
            return (err0, Exp({mantissa: 0}));
        }

        (MathError err1, uint rational) = divUInt(scaledNumerator, denom);
        if (err1 != MathError.NO_ERROR) {
            return (err1, Exp({mantissa: 0}));
        }

        return (MathError.NO_ERROR, Exp({mantissa: rational}));
    }

    /**
     * @dev Adds two exponentials, returning a new exponential.
     */
    function addExp(Exp memory a, Exp memory b) pure internal returns (MathError, Exp memory) {
        (MathError error, uint result) = addUInt(a.mantissa, b.mantissa);

        return (error, Exp({mantissa: result}));
    }

    /**
     * @dev Subtracts two exponentials, returning a new exponential.
     */
    function subExp(Exp memory a, Exp memory b) pure internal returns (MathError, Exp memory) {
        (MathError error, uint result) = subUInt(a.mantissa, b.mantissa);

        return (error, Exp({mantissa: result}));
    }

    /**
     * @dev Multiply an Exp by a scalar, returning a new Exp.
     */
    function mulScalar(Exp memory a, uint scalar) pure internal returns (MathError, Exp memory) {
        (MathError err0, uint scaledMantissa) = mulUInt(a.mantissa, scalar);
        if (err0 != MathError.NO_ERROR) {
            return (err0, Exp({mantissa: 0}));
        }

        return (MathError.NO_ERROR, Exp({mantissa: scaledMantissa}));
    }

    /**
     * @dev Multiply an Exp by a scalar, then truncate to return an unsigned integer.
     */
    function mulScalarTruncate(Exp memory a, uint scalar) pure internal returns (MathError, uint) {
        (MathError err, Exp memory product) = mulScalar(a, scalar);
        if (err != MathError.NO_ERROR) {
            return (err, 0);
        }

        return (MathError.NO_ERROR, truncate(product));
    }

    /**
     * @dev Multiply an Exp by a scalar, truncate, then add an to an unsigned integer, returning an unsigned integer.
     */
    function mulScalarTruncateAddUInt(Exp memory a, uint scalar, uint addend) pure internal returns (MathError, uint) {
        (MathError err, Exp memory product) = mulScalar(a, scalar);
        if (err != MathError.NO_ERROR) {
            return (err, 0);
        }

        return addUInt(truncate(product), addend);
    }

    /**
     * @dev Divide an Exp by a scalar, returning a new Exp.
     */
    function divScalar(Exp memory a, uint scalar) pure internal returns (MathError, Exp memory) {
        (MathError err0, uint descaledMantissa) = divUInt(a.mantissa, scalar);
        if (err0 != MathError.NO_ERROR) {
            return (err0, Exp({mantissa: 0}));
        }

        return (MathError.NO_ERROR, Exp({mantissa: descaledMantissa}));
    }

    /**
     * @dev Divide a scalar by an Exp, returning a new Exp.
     */
    function divScalarByExp(uint scalar, Exp memory divisor) pure internal returns (MathError, Exp memory) {
        /*
          We are doing this as:
          getExp(mulUInt(expScale, scalar), divisor.mantissa)

          How it works:
          Exp = a / b;
          Scalar = s;
          `s / (a / b)` = `b * s / a` and since for an Exp `a = mantissa, b = expScale`
        */
        (MathError err0, uint numerator) = mulUInt(expScale, scalar);
        if (err0 != MathError.NO_ERROR) {
            return (err0, Exp({mantissa: 0}));
        }
        return getExp(numerator, divisor.mantissa);
    }

    /**
     * @dev Divide a scalar by an Exp, then truncate to return an unsigned integer.
     */
    function divScalarByExpTruncate(uint scalar, Exp memory divisor) pure internal returns (MathError, uint) {
        (MathError err, Exp memory fraction) = divScalarByExp(scalar, divisor);
        if (err != MathError.NO_ERROR) {
            return (err, 0);
        }

        return (MathError.NO_ERROR, truncate(fraction));
    }

    /**
     * @dev Multiplies two exponentials, returning a new exponential.
     */
    function mulExp(Exp memory a, Exp memory b) pure internal returns (MathError, Exp memory) {

        (MathError err0, uint doubleScaledProduct) = mulUInt(a.mantissa, b.mantissa);
        if (err0 != MathError.NO_ERROR) {
            return (err0, Exp({mantissa: 0}));
        }

        // We add half the scale before dividing so that we get rounding instead of truncation.
        //  See "Listing 6" and text above it at https://accu.org/index.php/journals/1717
        // Without this change, a result like 6.6...e-19 will be truncated to 0 instead of being rounded to 1e-18.
        (MathError err1, uint doubleScaledProductWithHalfScale) = addUInt(halfExpScale, doubleScaledProduct);
        if (err1 != MathError.NO_ERROR) {
            return (err1, Exp({mantissa: 0}));
        }

        (MathError err2, uint product) = divUInt(doubleScaledProductWithHalfScale, expScale);
        // The only error `div` can return is MathError.DIVISION_BY_ZERO but we control `expScale` and it is not zero.
        assert(err2 == MathError.NO_ERROR);

        return (MathError.NO_ERROR, Exp({mantissa: product}));
    }

    /**
     * @dev Multiplies two exponentials given their mantissas, returning a new exponential.
     */
    function mulExp(uint a, uint b) pure internal returns (MathError, Exp memory) {
        return mulExp(Exp({mantissa: a}), Exp({mantissa: b}));
    }

    /**
     * @dev Multiplies three exponentials, returning a new exponential.
     */
    function mulExp3(Exp memory a, Exp memory b, Exp memory c) pure internal returns (MathError, Exp memory) {
        (MathError err, Exp memory ab) = mulExp(a, b);
        if (err != MathError.NO_ERROR) {
            return (err, ab);
        }
        return mulExp(ab, c);
    }

    /**
     * @dev Divides two exponentials, returning a new exponential.
     *     (a/scale) / (b/scale) = (a/scale) * (scale/b) = a/b,
     *  which we can scale as an Exp by calling getExp(a.mantissa, b.mantissa)
     */
    function divExp(Exp memory a, Exp memory b) pure internal returns (MathError, Exp memory) {
        return getExp(a.mantissa, b.mantissa);
    }

    /**
     * @dev Truncates the given exp to a whole number value.
     *      For example, truncate(Exp{mantissa: 15 * expScale}) = 15
     */
    function truncate(Exp memory exp) pure internal returns (uint) {
        // Note: We are not using careful math here as we're performing a division that cannot fail
        return exp.mantissa / expScale;
    }

    /**
     * @dev Checks if first Exp is less than second Exp.
     */
    function lessThanExp(Exp memory left, Exp memory right) pure internal returns (bool) {
        return left.mantissa < right.mantissa;
    }

    /**
     * @dev Checks if left Exp <= right Exp.
     */
    function lessThanOrEqualExp(Exp memory left, Exp memory right) pure internal returns (bool) {
        return left.mantissa <= right.mantissa;
    }

    /**
     * @dev Checks if left Exp > right Exp.
     */
    function greaterThanExp(Exp memory left, Exp memory right) pure internal returns (bool) {
        return left.mantissa > right.mantissa;
    }

    /**
     * @dev returns true if Exp is exactly zero
     */
    function isZeroExp(Exp memory value) pure internal returns (bool) {
        return value.mantissa == 0;
    }

    function safe224(uint n, string memory errorMessage) pure internal returns (uint224) {
        require(n < 2**224, errorMessage);
        return uint224(n);
    }

    function safe32(uint n, string memory errorMessage) pure internal returns (uint32) {
        require(n < 2**32, errorMessage);
        return uint32(n);
    }

    function add_(Exp memory a, Exp memory b) pure internal returns (Exp memory) {
        return Exp({mantissa: add_(a.mantissa, b.mantissa)});
    }

    function add_(Double memory a, Double memory b) pure internal returns (Double memory) {
        return Double({mantissa: add_(a.mantissa, b.mantissa)});
    }

    function add_(uint a, uint b) pure internal returns (uint) {
        return add_(a, b, "addition overflow");
    }

    function add_(uint a, uint b, string memory errorMessage) pure internal returns (uint) {
        uint c = a + b;
        require(c >= a, errorMessage);
        return c;
    }

    function sub_(Exp memory a, Exp memory b) pure internal returns (Exp memory) {
        return Exp({mantissa: sub_(a.mantissa, b.mantissa)});
    }

    function sub_(Double memory a, Double memory b) pure internal returns (Double memory) {
        return Double({mantissa: sub_(a.mantissa, b.mantissa)});
    }

    function sub_(uint a, uint b) pure internal returns (uint) {
        return sub_(a, b, "subtraction underflow");
    }

    function sub_(uint a, uint b, string memory errorMessage) pure internal returns (uint) {
        require(b <= a, errorMessage);
        return a - b;
    }

    function mul_(Exp memory a, Exp memory b) pure internal returns (Exp memory) {
        return Exp({mantissa: mul_(a.mantissa, b.mantissa) / expScale});
    }

    function mul_(Exp memory a, uint b) pure internal returns (Exp memory) {
        return Exp({mantissa: mul_(a.mantissa, b)});
    }

    function mul_(uint a, Exp memory b) pure internal returns (uint) {
        return mul_(a, b.mantissa) / expScale;
    }

    function mul_(Double memory a, Double memory b) pure internal returns (Double memory) {
        return Double({mantissa: mul_(a.mantissa, b.mantissa) / doubleScale});
    }

    function mul_(Double memory a, uint b) pure internal returns (Double memory) {
        return Double({mantissa: mul_(a.mantissa, b)});
    }

    function mul_(uint a, Double memory b) pure internal returns (uint) {
        return mul_(a, b.mantissa) / doubleScale;
    }

    function mul_(uint a, uint b) pure internal returns (uint) {
        return mul_(a, b, "multiplication overflow");
    }

    function mul_(uint a, uint b, string memory errorMessage) pure internal returns (uint) {
        if (a == 0 || b == 0) {
            return 0;
        }
        uint c = a * b;
        require(c / a == b, errorMessage);
        return c;
    }

    function div_(Exp memory a, Exp memory b) pure internal returns (Exp memory) {
        return Exp({mantissa: div_(mul_(a.mantissa, expScale), b.mantissa)});
    }

    function div_(Exp memory a, uint b) pure internal returns (Exp memory) {
        return Exp({mantissa: div_(a.mantissa, b)});
    }

    function div_(uint a, Exp memory b) pure internal returns (uint) {
        return div_(mul_(a, expScale), b.mantissa);
    }

    function div_(Double memory a, Double memory b) pure internal returns (Double memory) {
        return Double({mantissa: div_(mul_(a.mantissa, doubleScale), b.mantissa)});
    }

    function div_(Double memory a, uint b) pure internal returns (Double memory) {
        return Double({mantissa: div_(a.mantissa, b)});
    }

    function div_(uint a, Double memory b) pure internal returns (uint) {
        return div_(mul_(a, doubleScale), b.mantissa);
    }

    function div_(uint a, uint b) pure internal returns (uint) {
        return div_(a, b, "divide by zero");
    }

    function div_(uint a, uint b, string memory errorMessage) pure internal returns (uint) {
        require(b > 0, errorMessage);
        return a / b;
    }

    function fraction(uint a, uint b) pure internal returns (Double memory) {
        return Double({mantissa: div_(mul_(a, doubleScale), b)});
    }
}

// File: contracts/EIP20Interface.sol

pragma solidity ^0.5.16;

/**
 * @title ERC 20 Token Standard Interface
 *  https://eips.ethereum.org/EIPS/eip-20
 */
interface EIP20Interface {
    function name() external view returns (string memory);
    function symbol() external view returns (string memory);
    function decimals() external view returns (uint8);

    /**
      * @notice Get the total number of tokens in circulation
      * @return The supply of tokens
      */
    function totalSupply() external view returns (uint256);

    /**
     * @notice Gets the balance of the specified address
     * @param owner The address from which the balance will be retrieved
     * @return The balance
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
      * @notice Transfer `amount` tokens from `msg.sender` to `dst`
      * @param dst The address of the destination account
      * @param amount The number of tokens to transfer
      * @return Whether or not the transfer succeeded
      */
    function transfer(address dst, uint256 amount) external returns (bool success);

    /**
      * @notice Transfer `amount` tokens from `src` to `dst`
      * @param src The address of the source account
      * @param dst The address of the destination account
      * @param amount The number of tokens to transfer
      * @return Whether or not the transfer succeeded
      */
    function transferFrom(address src, address dst, uint256 amount) external returns (bool success);

    /**
      * @notice Approve `spender` to transfer up to `amount` from `src`
      * @dev This will overwrite the approval amount for `spender`
      *  and is subject to issues noted [here](https://eips.ethereum.org/EIPS/eip-20#approve)
      * @param spender The address of the account which may transfer tokens
      * @param amount The number of tokens that are approved (-1 means infinite)
      * @return Whether or not the approval succeeded
      */
    function approve(address spender, uint256 amount) external returns (bool success);

    /**
      * @notice Get the current allowance from `owner` for `spender`
      * @param owner The address of the account which owns the tokens to be spent
      * @param spender The address of the account which may transfer tokens
      * @return The number of tokens allowed to be spent (-1 means infinite)
      */
    function allowance(address owner, address spender) external view returns (uint256 remaining);

    event Transfer(address indexed from, address indexed to, uint256 amount);
    event Approval(address indexed owner, address indexed spender, uint256 amount);
}

// File: contracts/EIP20NonStandardInterface.sol

pragma solidity ^0.5.16;

/**
 * @title EIP20NonStandardInterface
 * @dev Version of ERC20 with no return values for `transfer` and `transferFrom`
 *  See https://medium.com/coinmonks/missing-return-value-bug-at-least-130-tokens-affected-d67bf08521ca
 */
interface EIP20NonStandardInterface {

    /**
     * @notice Get the total number of tokens in circulation
     * @return The supply of tokens
     */
    function totalSupply() external view returns (uint256);

    /**
     * @notice Gets the balance of the specified address
     * @param owner The address from which the balance will be retrieved
     * @return The balance
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    ///
    /// !!!!!!!!!!!!!!
    /// !!! NOTICE !!! `transfer` does not return a value, in violation of the ERC-20 specification
    /// !!!!!!!!!!!!!!
    ///

    /**
      * @notice Transfer `amount` tokens from `msg.sender` to `dst`
      * @param dst The address of the destination account
      * @param amount The number of tokens to transfer
      */
    function transfer(address dst, uint256 amount) external;

    ///
    /// !!!!!!!!!!!!!!
    /// !!! NOTICE !!! `transferFrom` does not return a value, in violation of the ERC-20 specification
    /// !!!!!!!!!!!!!!
    ///

    /**
      * @notice Transfer `amount` tokens from `src` to `dst`
      * @param src The address of the source account
      * @param dst The address of the destination account
      * @param amount The number of tokens to transfer
      */
    function transferFrom(address src, address dst, uint256 amount) external;

    /**
      * @notice Approve `spender` to transfer up to `amount` from `src`
      * @dev This will overwrite the approval amount for `spender`
      *  and is subject to issues noted [here](https://eips.ethereum.org/EIPS/eip-20#approve)
      * @param spender The address of the account which may transfer tokens
      * @param amount The number of tokens that are approved
      * @return Whether or not the approval succeeded
      */
    function approve(address spender, uint256 amount) external returns (bool success);

    /**
      * @notice Get the current allowance from `owner` for `spender`
      * @param owner The address of the account which owns the tokens to be spent
      * @param spender The address of the account which may transfer tokens
      * @return The number of tokens allowed to be spent
      */
    function allowance(address owner, address spender) external view returns (uint256 remaining);

    event Transfer(address indexed from, address indexed to, uint256 amount);
    event Approval(address indexed owner, address indexed spender, uint256 amount);
}

// File: contracts/SLToken.sol

pragma solidity ^0.5.16;








/**
 * @title SashimiLending's SLToken Contract
 * @notice Abstract base for SLTokens
 * @author SashimiLending
 */
contract SLToken is SLTokenInterface, Exponential, TokenErrorReporter {
    /**
     * @notice Initialize the money market
     * @param comptroller_ The address of the Comptroller
     * @param interestRateModel_ The address of the interest rate model
     * @param initialExchangeRateMantissa_ The initial exchange rate, scaled by 1e18
     * @param name_ EIP-20 name of this token
     * @param symbol_ EIP-20 symbol of this token
     * @param decimals_ EIP-20 decimal precision of this token
     */
    function initialize(ComptrollerInterface comptroller_,
                        InterestRateModel interestRateModel_,
                        uint initialExchangeRateMantissa_,
                        string memory name_,
                        string memory symbol_,
                        uint8 decimals_) public {
        require(msg.sender == admin, "only admin may initialize the market");
        require(accrualBlockNumber == 0 && borrowIndex == 0, "market may only be initialized once");

        // Set initial exchange rate
        initialExchangeRateMantissa = initialExchangeRateMantissa_;
        require(initialExchangeRateMantissa > 0, "initial exchange rate must be greater than zero.");

        // Set the comptroller
        uint err = _setComptroller(comptroller_);
        require(err == uint(Error.NO_ERROR), "setting comptroller failed");

        // Initialize block number and borrow index (block number mocks depend on comptroller being set)
        accrualBlockNumber = getBlockNumber();
        borrowIndex = mantissaOne;

        // Set the interest rate model (depends on block number / borrow index)
        err = _setInterestRateModelFresh(interestRateModel_);
        require(err == uint(Error.NO_ERROR), "setting interest rate model failed");

        name = name_;
        symbol = symbol_;
        decimals = decimals_;

        // The counter starts true to prevent changing it from zero to non-zero (i.e. smaller cost/refund)
        _notEntered = true;
    }

    /**
     * @notice Transfer `tokens` tokens from `src` to `dst` by `spender`
     * @dev Called by both `transfer` and `transferFrom` internally
     * @param spender The address of the account performing the transfer
     * @param src The address of the source account
     * @param dst The address of the destination account
     * @param tokens The number of tokens to transfer
     * @return Whether or not the transfer succeeded
     */
    function transferTokens(address spender, address src, address dst, uint tokens) internal returns (uint) {
        /* Fail if transfer not allowed */
        uint allowed = comptroller.transferAllowed(address(this), src, dst, tokens);
        if (allowed != 0) {
            return failOpaque(Error.COMPTROLLER_REJECTION, FailureInfo.TRANSFER_COMPTROLLER_REJECTION, allowed);
        }

        /* Do not allow self-transfers */
        if (src == dst) {
            return fail(Error.BAD_INPUT, FailureInfo.TRANSFER_NOT_ALLOWED);
        }

        /* Get the allowance, infinite for the account owner */
        uint startingAllowance = 0;
        if (spender == src) {
            startingAllowance = uint(-1);
        } else {
            startingAllowance = transferAllowances[src][spender];
        }

        /* Do the calculations, checking for {under,over}flow */
        MathError mathErr;
        uint allowanceNew;
        uint srcTokensNew;
        uint dstTokensNew;

        (mathErr, allowanceNew) = subUInt(startingAllowance, tokens);
        if (mathErr != MathError.NO_ERROR) {
            return fail(Error.MATH_ERROR, FailureInfo.TRANSFER_NOT_ALLOWED);
        }

        (mathErr, srcTokensNew) = subUInt(accountTokens[src], tokens);
        if (mathErr != MathError.NO_ERROR) {
            return fail(Error.MATH_ERROR, FailureInfo.TRANSFER_NOT_ENOUGH);
        }

        (mathErr, dstTokensNew) = addUInt(accountTokens[dst], tokens);
        if (mathErr != MathError.NO_ERROR) {
            return fail(Error.MATH_ERROR, FailureInfo.TRANSFER_TOO_MUCH);
        }

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        accountTokens[src] = srcTokensNew;
        accountTokens[dst] = dstTokensNew;

        /* Eat some of the allowance (if necessary) */
        if (startingAllowance != uint(-1)) {
            transferAllowances[src][spender] = allowanceNew;
        }

        /* We emit a Transfer event */
        emit Transfer(src, dst, tokens);

        comptroller.transferVerify(address(this), src, dst, tokens);

        return uint(Error.NO_ERROR);
    }

    /**
     * @notice Transfer `amount` tokens from `msg.sender` to `dst`
     * @param dst The address of the destination account
     * @param amount The number of tokens to transfer
     * @return Whether or not the transfer succeeded
     */
    function transfer(address dst, uint256 amount) external nonReentrant returns (bool) {
        return transferTokens(msg.sender, msg.sender, dst, amount) == uint(Error.NO_ERROR);
    }

    /**
     * @notice Transfer `amount` tokens from `src` to `dst`
     * @param src The address of the source account
     * @param dst The address of the destination account
     * @param amount The number of tokens to transfer
     * @return Whether or not the transfer succeeded
     */
    function transferFrom(address src, address dst, uint256 amount) external nonReentrant returns (bool) {
        return transferTokens(msg.sender, src, dst, amount) == uint(Error.NO_ERROR);
    }

    /**
     * @notice Approve `spender` to transfer up to `amount` from `src`
     * @dev This will overwrite the approval amount for `spender`
     *  and is subject to issues noted [here](https://eips.ethereum.org/EIPS/eip-20#approve)
     * @param spender The address of the account which may transfer tokens
     * @param amount The number of tokens that are approved (-1 means infinite)
     * @return Whether or not the approval succeeded
     */
    function approve(address spender, uint256 amount) external returns (bool) {
        address src = msg.sender;
        transferAllowances[src][spender] = amount;
        emit Approval(src, spender, amount);
        return true;
    }

    /**
     * @notice Get the current allowance from `owner` for `spender`
     * @param owner The address of the account which owns the tokens to be spent
     * @param spender The address of the account which may transfer tokens
     * @return The number of tokens allowed to be spent (-1 means infinite)
     */
    function allowance(address owner, address spender) external view returns (uint256) {
        return transferAllowances[owner][spender];
    }

    /**
     * @notice Get the token balance of the `owner`
     * @param owner The address of the account to query
     * @return The n...

// [truncated — 119862 bytes total]