Forkchoice Ethereum Mainnet

/*
 * Copyright (c) 2022, Circle Internet Financial Limited.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.7.6;

/*
 * Copyright (c) 2022, Circle Internet Financial Limited.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/**
 * @title ITokenMinter
 * @notice interface for minter of tokens that are mintable, burnable, and interchangeable
 * across domains.
 */
interface ITokenMinter {
    /**
     * @notice Mints `amount` of local tokens corresponding to the
     * given (`sourceDomain`, `burnToken`) pair, to `to` address.
     * @dev reverts if the (`sourceDomain`, `burnToken`) pair does not
     * map to a nonzero local token address. This mapping can be queried using
     * getLocalToken().
     * @param sourceDomain Source domain where `burnToken` was burned.
     * @param burnToken Burned token address as bytes32.
     * @param to Address to receive minted tokens, corresponding to `burnToken`,
     * on this domain.
     * @param amount Amount of tokens to mint. Must be less than or equal
     * to the minterAllowance of this TokenMinter for given `_mintToken`.
     * @return mintToken token minted.
     */
    function mint(
        uint32 sourceDomain,
        bytes32 burnToken,
        address to,
        uint256 amount
    ) external returns (address mintToken);

    /**
     * @notice Burn tokens owned by this ITokenMinter.
     * @param burnToken burnable token.
     * @param amount amount of tokens to burn. Must be less than or equal to this ITokenMinter's
     * account balance of the given `_burnToken`.
     */
    function burn(address burnToken, uint256 amount) external;

    /**
     * @notice Get the local token associated with the given remote domain and token.
     * @param remoteDomain Remote domain
     * @param remoteToken Remote token
     * @return local token address
     */
    function getLocalToken(uint32 remoteDomain, bytes32 remoteToken)
        external
        view
        returns (address);

    /**
     * @notice Set the token controller of this ITokenMinter. Token controller
     * is responsible for mapping local tokens to remote tokens, and managing
     * token-specific limits
     * @param newTokenController new token controller address
     */
    function setTokenController(address newTokenController) external;
}

/*
 * Copyright (c) 2022, Circle Internet Financial Limited.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount)
        external
        returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender)
        external
        view
        returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );
}

/**
 * @title IMintBurnToken
 * @notice interface for mintable and burnable ERC20 token
 */
interface IMintBurnToken is IERC20 {
    /**
     * @dev Function to mint tokens
     * @param to The address that will receive the minted tokens.
     * @param amount The amount of tokens to mint. Must be less than or equal
     * to the minterAllowance of the caller.
     * @return A boolean that indicates if the operation was successful.
     */
    function mint(address to, uint256 amount) external returns (bool);

    /**
     * @dev allows a minter to burn some of its own tokens
     * Validates that caller is a minter and that sender is not blacklisted
     * amount is less than or equal to the minter's account balance
     * @param amount uint256 the amount of tokens to be burned
     */
    function burn(uint256 amount) external;
}

/*
 * Copyright (c) 2022, Circle Internet Financial Limited.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

/**
 * @dev forked from https://github.com/OpenZeppelin/openzeppelin-contracts/blob/7c5f6bc2c8743d83443fa46395d75f2f3f99054a/contracts/access/Ownable.sol
 * Modifications:
 * 1. Update Solidity version from 0.8.0 to 0.7.6 (11/9/2022). (v8 was used
 * as base because it includes internal _transferOwnership method.)
 * 2. Remove renounceOwnership function
 *
 * Description
 * Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(
        address indexed previousOwner,
        address indexed newOwner
    );

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(
            newOwner != address(0),
            "Ownable: new owner is the zero address"
        );
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

/**
 * @dev forked from https://github.com/OpenZeppelin/openzeppelin-contracts/blob/7c5f6bc2c8743d83443fa46395d75f2f3f99054a/contracts/access/Ownable2Step.sol
 * Modifications:
 * 1. Update Solidity version from 0.8.0 to 0.7.6. Version 0.8.0 was used
 * as base because this contract was added to OZ repo after version 0.8.0.
 *
 * Contract module which provides access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership} and {acceptOwnership}.
 *
 * This module is used through inheritance. It will make available all functions
 * from parent (Ownable).
 */
abstract contract Ownable2Step is Ownable {
    address private _pendingOwner;

    event OwnershipTransferStarted(
        address indexed previousOwner,
        address indexed newOwner
    );

    /**
     * @dev Returns the address of the pending owner.
     */
    function pendingOwner() public view virtual returns (address) {
        return _pendingOwner;
    }

    /**
     * @dev Starts the ownership transfer of the contract to a new account. Replaces the pending transfer if there is one.
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner)
        public
        virtual
        override
        onlyOwner
    {
        _pendingOwner = newOwner;
        emit OwnershipTransferStarted(owner(), newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`) and deletes any pending owner.
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual override {
        delete _pendingOwner;
        super._transferOwnership(newOwner);
    }

    /**
     * @dev The new owner accepts the ownership transfer.
     */
    function acceptOwnership() external {
        address sender = _msgSender();
        require(
            pendingOwner() == sender,
            "Ownable2Step: caller is not the new owner"
        );
        _transferOwnership(sender);
    }
}

/**
 * @notice Base contract which allows children to implement an emergency stop
 * mechanism
 * @dev Forked from https://github.com/centrehq/centre-tokens/blob/0d3cab14ebd133a83fc834dbd48d0468bdf0b391/contracts/v1/Pausable.sol
 * Modifications:
 * 1. Update Solidity version from 0.6.12 to 0.7.6 (8/23/2022)
 * 2. Change pauser visibility to private, declare external getter (11/19/22)
 */
contract Pausable is Ownable2Step {
    event Pause();
    event Unpause();
    event PauserChanged(address indexed newAddress);

    address private _pauser;
    bool public paused = false;

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     */
    modifier whenNotPaused() {
        require(!paused, "Pausable: paused");
        _;
    }

    /**
     * @dev throws if called by any account other than the pauser
     */
    modifier onlyPauser() {
        require(msg.sender == _pauser, "Pausable: caller is not the pauser");
        _;
    }

    /**
     * @notice Returns current pauser
     * @return Pauser's address
     */
    function pauser() external view returns (address) {
        return _pauser;
    }

    /**
     * @dev called by the owner to pause, triggers stopped state
     */
    function pause() external onlyPauser {
        paused = true;
        emit Pause();
    }

    /**
     * @dev called by the owner to unpause, returns to normal state
     */
    function unpause() external onlyPauser {
        paused = false;
        emit Unpause();
    }

    /**
     * @dev update the pauser role
     */
    function updatePauser(address _newPauser) external onlyOwner {
        require(
            _newPauser != address(0),
            "Pausable: new pauser is the zero address"
        );
        _pauser = _newPauser;
        emit PauserChanged(_pauser);
    }
}

/*
 * Copyright (c) 2022, Circle Internet Financial Limited.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b)
        internal
        pure
        returns (bool, uint256)
    {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b)
        internal
        pure
        returns (bool, uint256)
    {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b)
        internal
        pure
        returns (bool, uint256)
    {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b)
        internal
        pure
        returns (bool, uint256)
    {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b)
        internal
        pure
        returns (bool, uint256)
    {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(
            address(this).balance >= amount,
            "Address: insufficient balance"
        );

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{value: amount}("");
        require(
            success,
            "Address: unable to send value, recipient may have reverted"
        );
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data)
        internal
        returns (bytes memory)
    {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return
            functionCallWithValue(
                target,
                data,
                value,
                "Address: low-level call with value failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(
            address(this).balance >= value,
            "Address: insufficient balance for call"
        );
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{value: value}(
            data
        );
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data)
        internal
        view
        returns (bytes memory)
    {
        return
            functionStaticCall(
                target,
                data,
                "Address: low-level static call failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data)
        internal
        returns (bytes memory)
    {
        return
            functionDelegateCall(
                target,
                data,
                "Address: low-level delegate call failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) private pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(token.transfer.selector, to, value)
        );
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(token.transferFrom.selector, from, to, value)
        );
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(token.approve.selector, spender, value)
        );
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(
            value
        );
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(
                token.approve.selector,
                spender,
                newAllowance
            )
        );
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(
            value,
            "SafeERC20: decreased allowance below zero"
        );
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(
                token.approve.selector,
                spender,
                newAllowance
            )
        );
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(
            data,
            "SafeERC20: low-level call failed"
        );
        if (returndata.length > 0) {
            // Return data is optional
            // solhint-disable-next-line max-line-length
            require(
                abi.decode(returndata, (bool)),
                "SafeERC20: ERC20 operation did not succeed"
            );
        }
    }
}

/**
 * @notice Base contract which allows children to rescue ERC20 locked in their contract.
 * @dev Forked from https://github.com/centrehq/centre-tokens/blob/0d3cab14ebd133a83fc834dbd48d0468bdf0b391/contracts/v1.1/Rescuable.sol
 * Modifications:
 * 1. Update Solidity version from 0.6.12 to 0.7.6 (8/23/2022)
 */
contract Rescuable is Ownable2Step {
    using SafeERC20 for IERC20;

    address private _rescuer;

    event RescuerChanged(address indexed newRescuer);

    /**
     * @notice Returns current rescuer
     * @return Rescuer's address
     */
    function rescuer() external view returns (address) {
        return _rescuer;
    }

    /**
     * @notice Revert if called by any account other than the rescuer.
     */
    modifier onlyRescuer() {
        require(msg.sender == _rescuer, "Rescuable: caller is not the rescuer");
        _;
    }

    /**
     * @notice Rescue ERC20 tokens locked up in this contract.
     * @param tokenContract ERC20 token contract address
     * @param to        Recipient address
     * @param amount    Amount to withdraw
     */
    function rescueERC20(
        IERC20 tokenContract,
        address to,
        uint256 amount
    ) external onlyRescuer {
        tokenContract.safeTransfer(to, amount);
    }

    /**
     * @notice Assign the rescuer role to a given address.
     * @param newRescuer New rescuer's address
     */
    function updateRescuer(address newRescuer) external onlyOwner {
        require(
            newRescuer != address(0),
            "Rescuable: new rescuer is the zero address"
        );
        _rescuer = newRescuer;
        emit RescuerChanged(newRescuer);
    }
}

/*
 * Copyright (c) 2022, Circle Internet Financial Limited.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/**
 * @title TokenController
 * @notice Base contract which allows children to control tokens, including mapping
 * address of local tokens to addresses of corresponding tokens on remote domains,
 * and limiting the amount of each token that can be burned per message.
 */
abstract contract TokenController {
    // ============ Events ============
    /**
     * @notice Emitted when a token pair is linked
     * @param localToken local token to support
     * @param remoteDomain remote domain
     * @param remoteToken token on `remoteDomain` corresponding to `localToken`
     */
    event TokenPairLinked(
        address localToken,
        uint32 remoteDomain,
        bytes32 remoteToken
    );

    /**
     * @notice Emitted when a token pair is unlinked
     * @param localToken local token address
     * @param remoteDomain remote domain
     * @param remoteToken token on `remoteDomain` unlinked from `localToken`
     */
    event TokenPairUnlinked(
        address localToken,
        uint32 remoteDomain,
        bytes32 remoteToken
    );

    /**
     * @notice Emitted when a burn limit per message is set for a particular token
     * @param token local token address
     * @param burnLimitPerMessage burn limit per message for `token`
     */
    event SetBurnLimitPerMessage(
        address indexed token,
        uint256 burnLimitPerMessage
    );

    /**
     * @notice Emitted when token controller is set
     * @param tokenController token controller address set
     */
    event SetTokenController(address tokenController);

    // ============ State Variables ============
    // Supported burnable tokens on the local domain
    // local token (address) => maximum burn amounts per message
    mapping(address => uint256) public burnLimitsPerMessage;

    // Supported mintable tokens on remote domains, mapped to their corresponding local token
    // hash(remote domain & remote token bytes32 address) => local token (address)
    mapping(bytes32 => address) public remoteTokensToLocalTokens;

    // Role with permission to manage token address mapping across domains, and per-message burn limits
    address private _tokenController;

    // ============ Modifiers ============
    /**
     * @dev Throws if called by any account other than the tokenController.
     */
    modifier onlyTokenController() {
        require(
            msg.sender == _tokenController,
            "Caller is not tokenController"
        );
        _;
    }

    /**
     * @notice ensures that attempted burn does not exceed
     * burn limit per-message for given `burnToken`.
     * @dev reverts if allowed burn amount is 0, or burnAmount exceeds
     * allowed burn amount.
     * @param token address of token to burn
     * @param amount amount of `token` to burn
     */
    modifier onlyWithinBurnLimit(address token, uint256 amount) {
        uint256 _allowedBurnAmount = burnLimitsPerMessage[token];
        require(_allowedBurnAmount > 0, "Burn token not supported");
        require(
            amount <= _allowedBurnAmount,
            "Burn amount exceeds per tx limit"
        );
        _;
    }

    // ============ Public/External Functions  ============
    /**
     * @dev Returns the address of the tokenController
     * @return address of the tokenController
     */
    function tokenController() external view returns (address) {
        return _tokenController;
    }

    /**
     * @notice Links a pair of local and remote tokens to be supported by this TokenMinter.
     * @dev Associates a (`remoteToken`, `localToken`) pair by updating remoteTokensToLocalTokens mapping.
     * Reverts if the remote token (for the given `remoteDomain`) already maps to a nonzero local token.
     * Note:
     * - A remote token (on a certain remote domain) can only map to one local token, but many remote tokens
     * can map to the same local token.
     * - Setting a token pair does not enable the `localToken` (that requires calling setLocalTokenEnabledStatus.)
     */
    function linkTokenPair(
        address localToken,
        uint32 remoteDomain,
        bytes32 remoteToken
    ) external onlyTokenController {
        bytes32 _remoteTokensKey = _hashRemoteDomainAndToken(
            remoteDomain,
            remoteToken
        );

        // remote token must not be already linked to a local token
        require(
            remoteTokensToLocalTokens[_remoteTokensKey] == address(0),
            "Unable to link token pair"
        );

        remoteTokensToLocalTokens[_remoteTokensKey] = localToken;

        emit TokenPairLinked(localToken, remoteDomain, remoteToken);
    }

    /**
     * @notice Unlinks a pair of local and remote tokens for this TokenMinter.
     * @dev Removes link from `remoteToken`, to `localToken` for given `remoteDomain`
     * by updating remoteTokensToLocalTokens mapping.
     * Reverts if the remote token (for the given `remoteDomain`) already maps to the zero address.
     * Note:
     * - A remote token (on a certain remote domain) can only map to one local token, but many remote tokens
     * can map to the same local token.
     * - Unlinking a token pair does not disable burning the `localToken` (that requires calling setMaxBurnAmountPerMessage.)
     */
    function unlinkTokenPair(
        address localToken,
        uint32 remoteDomain,
        bytes32 remoteToken
    ) external onlyTokenController {
        bytes32 _remoteTokensKey = _hashRemoteDomainAndToken(
            remoteDomain,
            remoteToken
        );

        // remote token must be linked to a local token before unlink
        require(
            remoteTokensToLocalTokens[_remoteTokensKey] != address(0),
            "Unable to unlink token pair"
        );

        delete remoteTokensToLocalTokens[_remoteTokensKey];

        emit TokenPairUnlinked(localToken, remoteDomain, remoteToken);
    }

    /**
     * @notice Sets the maximum burn amount per message for a given `localToken`.
     * @dev Burns with amounts exceeding `burnLimitPerMessage` will revert. Mints do not
     * respect this value, so if this limit is reduced, previously burned tokens will still
     * be mintable.
     * @param localToken Local token to set the maximum burn amount per message of.
     * @param burnLimitPerMessage Maximum burn amount per message to set.
     */
    function setMaxBurnAmountPerMessage(
        address localToken,
        uint256 burnLimitPerMessage
    ) external onlyTokenController {
        burnLimitsPerMessage[localToken] = burnLimitPerMessage;

        emit SetBurnLimitPerMessage(localToken, burnLimitPerMessage);
    }

    // ============ Internal Utils ============
    /**
     * @notice Set tokenController to `newTokenController`, and
     * emit `SetTokenController` event.
     * @dev newTokenController must be nonzero.
     * @param newTokenController address of new token controller
     */
    function _setTokenController(address newTokenController) internal {
        require(
            newTokenController != address(0),
            "Invalid token controller address"
        );
        _tokenController = newTokenController;
        emit SetTokenController(newTokenController);
    }

    /**
     * @notice Get the enabled local token associated with the given remote domain and token.
     * @param remoteDomain Remote domain
     * @param remoteToken Remote token
     * @return Local token address
     */
    function _getLocalToken(uint32 remoteDomain, bytes32 remoteToken)
        internal
        view
        returns (address)
    {
        bytes32 _remoteTokensKey = _hashRemoteDomainAndToken(
            remoteDomain,
            remoteToken
        );

        return remoteTokensToLocalTokens[_remoteTokensKey];
    }

    /**
     * @notice hashes packed `_remoteDomain` and `_remoteToken`.
     * @param remoteDomain Domain where message originated from
     * @param remoteToken Address of remote token as bytes32
     * @return keccak hash of packed remote domain and token
     */
    function _hashRemoteDomainAndToken(uint32 remoteDomain, bytes32 remoteToken)
        internal
        pure
        returns (bytes32)
    {
        return keccak256(abi.encodePacked(remoteDomain, remoteToken));
    }
}

/*
 * Copyright (c) 2022, Circle Internet Financial Limited.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/**
 * @title IMessageHandler
 * @notice Handles messages on destination domain forwarded from
 * an IReceiver
 */
interface IMessageHandler {
    /**
     * @notice handles an incoming message from a Receiver
     * @param sourceDomain the source domain of the message
     * @param sender the sender of the message
     * @param messageBody The message raw bytes
     * @return success bool, true if successful
     */
    function handleReceiveMessage(
        uint32 sourceDomain,
        bytes32 sender,
        bytes calldata messageBody
    ) external returns (bool);
}

/*
 * Copyright (c) 2022, Circle Internet Financial Limited.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/**
 * @title IRelayer
 * @notice Sends messages from source domain to destination domain
 */
interfac...

// [truncated — 127434 bytes total]