Cryo Explorer Ethereum Mainnet

// File: @openzeppelin/contracts/math/SafeMath.sol

pragma solidity ^0.6.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// File: @openzeppelin/contracts/token/ERC20/IERC20.sol

pragma solidity ^0.6.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: @openzeppelin/contracts/utils/Address.sol

pragma solidity ^0.6.2;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly { codehash := extcodehash(account) }
        return (codehash != accountHash && codehash != 0x0);
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
}

// File: @openzeppelin/contracts/token/ERC20/SafeERC20.sol

pragma solidity ^0.6.0;




/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for ERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves.

        // A Solidity high level call has three parts:
        //  1. The target address is checked to verify it contains contract code
        //  2. The call itself is made, and success asserted
        //  3. The return value is decoded, which in turn checks the size of the returned data.
        // solhint-disable-next-line max-line-length
        require(address(token).isContract(), "SafeERC20: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = address(token).call(data);
        require(success, "SafeERC20: low-level call failed");

        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// File: contracts/common/implementation/FixedPoint.sol

pragma solidity ^0.6.0;



/**
 * @title Library for fixed point arithmetic on uints
 */
library FixedPoint {
    using SafeMath for uint256;

    // Supports 18 decimals. E.g., 1e18 represents "1", 5e17 represents "0.5".
    // Can represent a value up to (2^256 - 1)/10^18 = ~10^59. 10^59 will be stored internally as uint256 10^77.
    uint256 private constant FP_SCALING_FACTOR = 10**18;

    struct Unsigned {
        uint256 rawValue;
    }

    /**
     * @notice Constructs an `Unsigned` from an unscaled uint, e.g., `b=5` gets stored internally as `5**18`.
     * @param a uint to convert into a FixedPoint.
     * @return the converted FixedPoint.
     */
    function fromUnscaledUint(uint256 a) internal pure returns (Unsigned memory) {
        return Unsigned(a.mul(FP_SCALING_FACTOR));
    }

    /**
     * @notice Whether `a` is equal to `b`.
     * @param a a FixedPoint.
     * @param b a uint256.
     * @return True if equal, or False.
     */
    function isEqual(Unsigned memory a, uint256 b) internal pure returns (bool) {
        return a.rawValue == fromUnscaledUint(b).rawValue;
    }

    /**
     * @notice Whether `a` is equal to `b`.
     * @param a a FixedPoint.
     * @param b a FixedPoint.
     * @return True if equal, or False.
     */
    function isEqual(Unsigned memory a, Unsigned memory b) internal pure returns (bool) {
        return a.rawValue == b.rawValue;
    }

    /**
     * @notice Whether `a` is greater than `b`.
     * @param a a FixedPoint.
     * @param b a FixedPoint.
     * @return True if `a > b`, or False.
     */
    function isGreaterThan(Unsigned memory a, Unsigned memory b) internal pure returns (bool) {
        return a.rawValue > b.rawValue;
    }

    /**
     * @notice Whether `a` is greater than `b`.
     * @param a a FixedPoint.
     * @param b a uint256.
     * @return True if `a > b`, or False.
     */
    function isGreaterThan(Unsigned memory a, uint256 b) internal pure returns (bool) {
        return a.rawValue > fromUnscaledUint(b).rawValue;
    }

    /**
     * @notice Whether `a` is greater than `b`.
     * @param a a uint256.
     * @param b a FixedPoint.
     * @return True if `a > b`, or False.
     */
    function isGreaterThan(uint256 a, Unsigned memory b) internal pure returns (bool) {
        return fromUnscaledUint(a).rawValue > b.rawValue;
    }

    /**
     * @notice Whether `a` is greater than or equal to `b`.
     * @param a a FixedPoint.
     * @param b a FixedPoint.
     * @return True if `a >= b`, or False.
     */
    function isGreaterThanOrEqual(Unsigned memory a, Unsigned memory b) internal pure returns (bool) {
        return a.rawValue >= b.rawValue;
    }

    /**
     * @notice Whether `a` is greater than or equal to `b`.
     * @param a a FixedPoint.
     * @param b a uint256.
     * @return True if `a >= b`, or False.
     */
    function isGreaterThanOrEqual(Unsigned memory a, uint256 b) internal pure returns (bool) {
        return a.rawValue >= fromUnscaledUint(b).rawValue;
    }

    /**
     * @notice Whether `a` is greater than or equal to `b`.
     * @param a a uint256.
     * @param b a FixedPoint.
     * @return True if `a >= b`, or False.
     */
    function isGreaterThanOrEqual(uint256 a, Unsigned memory b) internal pure returns (bool) {
        return fromUnscaledUint(a).rawValue >= b.rawValue;
    }

    /**
     * @notice Whether `a` is less than `b`.
     * @param a a FixedPoint.
     * @param b a FixedPoint.
     * @return True if `a < b`, or False.
     */
    function isLessThan(Unsigned memory a, Unsigned memory b) internal pure returns (bool) {
        return a.rawValue < b.rawValue;
    }

    /**
     * @notice Whether `a` is less than `b`.
     * @param a a FixedPoint.
     * @param b a uint256.
     * @return True if `a < b`, or False.
     */
    function isLessThan(Unsigned memory a, uint256 b) internal pure returns (bool) {
        return a.rawValue < fromUnscaledUint(b).rawValue;
    }

    /**
     * @notice Whether `a` is less than `b`.
     * @param a a uint256.
     * @param b a FixedPoint.
     * @return True if `a < b`, or False.
     */
    function isLessThan(uint256 a, Unsigned memory b) internal pure returns (bool) {
        return fromUnscaledUint(a).rawValue < b.rawValue;
    }

    /**
     * @notice Whether `a` is less than or equal to `b`.
     * @param a a FixedPoint.
     * @param b a FixedPoint.
     * @return True if `a <= b`, or False.
     */
    function isLessThanOrEqual(Unsigned memory a, Unsigned memory b) internal pure returns (bool) {
        return a.rawValue <= b.rawValue;
    }

    /**
     * @notice Whether `a` is less than or equal to `b`.
     * @param a a FixedPoint.
     * @param b a uint256.
     * @return True if `a <= b`, or False.
     */
    function isLessThanOrEqual(Unsigned memory a, uint256 b) internal pure returns (bool) {
        return a.rawValue <= fromUnscaledUint(b).rawValue;
    }

    /**
     * @notice Whether `a` is less than or equal to `b`.
     * @param a a uint256.
     * @param b a FixedPoint.
     * @return True if `a <= b`, or False.
     */
    function isLessThanOrEqual(uint256 a, Unsigned memory b) internal pure returns (bool) {
        return fromUnscaledUint(a).rawValue <= b.rawValue;
    }

    /**
     * @notice The minimum of `a` and `b`.
     * @param a a FixedPoint.
     * @param b a FixedPoint.
     * @return the minimum of `a` and `b`.
     */
    function min(Unsigned memory a, Unsigned memory b) internal pure returns (Unsigned memory) {
        return a.rawValue < b.rawValue ? a : b;
    }

    /**
     * @notice The maximum of `a` and `b`.
     * @param a a FixedPoint.
     * @param b a FixedPoint.
     * @return the maximum of `a` and `b`.
     */
    function max(Unsigned memory a, Unsigned memory b) internal pure returns (Unsigned memory) {
        return a.rawValue > b.rawValue ? a : b;
    }

    /**
     * @notice Adds two `Unsigned`s, reverting on overflow.
     * @param a a FixedPoint.
     * @param b a FixedPoint.
     * @return the sum of `a` and `b`.
     */
    function add(Unsigned memory a, Unsigned memory b) internal pure returns (Unsigned memory) {
        return Unsigned(a.rawValue.add(b.rawValue));
    }

    /**
     * @notice Adds an `Unsigned` to an unscaled uint, reverting on overflow.
     * @param a a FixedPoint.
     * @param b a uint256.
     * @return the sum of `a` and `b`.
     */
    function add(Unsigned memory a, uint256 b) internal pure returns (Unsigned memory) {
        return add(a, fromUnscaledUint(b));
    }

    /**
     * @notice Subtracts two `Unsigned`s, reverting on overflow.
     * @param a a FixedPoint.
     * @param b a FixedPoint.
     * @return the difference of `a` and `b`.
     */
    function sub(Unsigned memory a, Unsigned memory b) internal pure returns (Unsigned memory) {
        return Unsigned(a.rawValue.sub(b.rawValue));
    }

    /**
     * @notice Subtracts an unscaled uint256 from an `Unsigned`, reverting on overflow.
     * @param a a FixedPoint.
     * @param b a uint256.
     * @return the difference of `a` and `b`.
     */
    function sub(Unsigned memory a, uint256 b) internal pure returns (Unsigned memory) {
        return sub(a, fromUnscaledUint(b));
    }

    /**
     * @notice Subtracts an `Unsigned` from an unscaled uint256, reverting on overflow.
     * @param a a uint256.
     * @param b a FixedPoint.
     * @return the difference of `a` and `b`.
     */
    function sub(uint256 a, Unsigned memory b) internal pure returns (Unsigned memory) {
        return sub(fromUnscaledUint(a), b);
    }

    /**
     * @notice Multiplies two `Unsigned`s, reverting on overflow.
     * @dev This will "floor" the product.
     * @param a a FixedPoint.
     * @param b a FixedPoint.
     * @return the product of `a` and `b`.
     */
    function mul(Unsigned memory a, Unsigned memory b) internal pure returns (Unsigned memory) {
        // There are two caveats with this computation:
        // 1. Max output for the represented number is ~10^41, otherwise an intermediate value overflows. 10^41 is
        // stored internally as a uint256 ~10^59.
        // 2. Results that can't be represented exactly are truncated not rounded. E.g., 1.4 * 2e-18 = 2.8e-18, which
        // would round to 3, but this computation produces the result 2.
        // No need to use SafeMath because FP_SCALING_FACTOR != 0.
        return Unsigned(a.rawValue.mul(b.rawValue) / FP_SCALING_FACTOR);
    }

    /**
     * @notice Multiplies an `Unsigned` and an unscaled uint256, reverting on overflow.
     * @dev This will "floor" the product.
     * @param a a FixedPoint.
     * @param b a uint256.
     * @return the product of `a` and `b`.
     */
    function mul(Unsigned memory a, uint256 b) internal pure returns (Unsigned memory) {
        return Unsigned(a.rawValue.mul(b));
    }

    /**
     * @notice Multiplies two `Unsigned`s and "ceil's" the product, reverting on overflow.
     * @param a a FixedPoint.
     * @param b a FixedPoint.
     * @return the product of `a` and `b`.
     */
    function mulCeil(Unsigned memory a, Unsigned memory b) internal pure returns (Unsigned memory) {
        uint256 mulRaw = a.rawValue.mul(b.rawValue);
        uint256 mulFloor = mulRaw / FP_SCALING_FACTOR;
        uint256 mod = mulRaw.mod(FP_SCALING_FACTOR);
        if (mod != 0) {
            return Unsigned(mulFloor.add(1));
        } else {
            return Unsigned(mulFloor);
        }
    }

    /**
     * @notice Multiplies an `Unsigned` and an unscaled uint256 and "ceil's" the product, reverting on overflow.
     * @param a a FixedPoint.
     * @param b a FixedPoint.
     * @return the product of `a` and `b`.
     */
    function mulCeil(Unsigned memory a, uint256 b) internal pure returns (Unsigned memory) {
        // Since b is an int, there is no risk of truncation and we can just mul it normally
        return Unsigned(a.rawValue.mul(b));
    }

    /**
     * @notice Divides one `Unsigned` by an `Unsigned`, reverting on overflow or division by 0.
     * @dev This will "floor" the quotient.
     * @param a a FixedPoint numerator.
     * @param b a FixedPoint denominator.
     * @return the quotient of `a` divided by `b`.
     */
    function div(Unsigned memory a, Unsigned memory b) internal pure returns (Unsigned memory) {
        // There are two caveats with this computation:
        // 1. Max value for the number dividend `a` represents is ~10^41, otherwise an intermediate value overflows.
        // 10^41 is stored internally as a uint256 10^59.
        // 2. Results that can't be represented exactly are truncated not rounded. E.g., 2 / 3 = 0.6 repeating, which
        // would round to 0.666666666666666667, but this computation produces the result 0.666666666666666666.
        return Unsigned(a.rawValue.mul(FP_SCALING_FACTOR).div(b.rawValue));
    }

    /**
     * @notice Divides one `Unsigned` by an unscaled uint256, reverting on overflow or division by 0.
     * @dev This will "floor" the quotient.
     * @param a a FixedPoint numerator.
     * @param b a uint256 denominator.
     * @return the quotient of `a` divided by `b`.
     */
    function div(Unsigned memory a, uint256 b) internal pure returns (Unsigned memory) {
        return Unsigned(a.rawValue.div(b));
    }

    /**
     * @notice Divides one unscaled uint256 by an `Unsigned`, reverting on overflow or division by 0.
     * @dev This will "floor" the quotient.
     * @param a a uint256 numerator.
     * @param b a FixedPoint denominator.
     * @return the quotient of `a` divided by `b`.
     */
    function div(uint256 a, Unsigned memory b) internal pure returns (Unsigned memory) {
        return div(fromUnscaledUint(a), b);
    }

    /**
     * @notice Divides one `Unsigned` by an `Unsigned` and "ceil's" the quotient, reverting on overflow or division by 0.
     * @param a a FixedPoint numerator.
     * @param b a FixedPoint denominator.
     * @return the quotient of `a` divided by `b`.
     */
    function divCeil(Unsigned memory a, Unsigned memory b) internal pure returns (Unsigned memory) {
        uint256 aScaled = a.rawValue.mul(FP_SCALING_FACTOR);
        uint256 divFloor = aScaled.div(b.rawValue);
        uint256 mod = aScaled.mod(b.rawValue);
        if (mod != 0) {
            return Unsigned(divFloor.add(1));
        } else {
            return Unsigned(divFloor);
        }
    }

    /**
     * @notice Divides one `Unsigned` by an unscaled uint256 and "ceil's" the quotient, reverting on overflow or division by 0.
     * @param a a FixedPoint numerator.
     * @param b a uint256 denominator.
     * @return the quotient of `a` divided by `b`.
     */
    function divCeil(Unsigned memory a, uint256 b) internal pure returns (Unsigned memory) {
        // Because it is possible that a quotient gets truncated, we can't just call "Unsigned(a.rawValue.div(b))"
        // similarly to mulCeil with a uint256 as the second parameter. Therefore we need to convert b into an Unsigned.
        // This creates the possibility of overflow if b is very large.
        return divCeil(a, fromUnscaledUint(b));
    }

    /**
     * @notice Raises an `Unsigned` to the power of an unscaled uint256, reverting on overflow. E.g., `b=2` squares `a`.
     * @dev This will "floor" the result.
     * @param a a FixedPoint numerator.
     * @param b a uint256 denominator.
     * @return output is `a` to the power of `b`.
     */
    function pow(Unsigned memory a, uint256 b) internal pure returns (Unsigned memory output) {
        output = fromUnscaledUint(1);
        for (uint256 i = 0; i < b; i = i.add(1)) {
            output = mul(output, a);
        }
    }
}

// File: contracts/common/interfaces/ExpandedIERC20.sol

pragma solidity ^0.6.0;



/**
 * @title ERC20 interface that includes burn and mint methods.
 */
abstract contract ExpandedIERC20 is IERC20 {
    /**
     * @notice Burns a specific amount of the caller's tokens.
     * @dev Only burns the caller's tokens, so it is safe to leave this method permissionless.
     */
    function burn(uint256 value) external virtual;

    /**
     * @notice Mints tokens and adds them to the balance of the `to` address.
     * @dev This method should be permissioned to only allow designated parties to mint tokens.
     */
    function mint(address to, uint256 value) external virtual returns (bool);
}

// File: contracts/oracle/interfaces/OracleInterface.sol

pragma solidity ^0.6.0;


/**
 * @title Financial contract facing Oracle interface.
 * @dev Interface used by financial contracts to interact with the Oracle. Voters will use a different interface.
 */
interface OracleInterface {
    /**
     * @notice Enqueues a request (if a request isn't already present) for the given `identifier`, `time` pair.
     * @dev Time must be in the past and the identifier must be supported.
     * @param identifier uniquely identifies the price requested. eg BTC/USD (encoded as bytes32) could be requested.
     * @param time unix timestamp for the price request.
     */
    function requestPrice(bytes32 identifier, uint256 time) external;

    /**
     * @notice Whether the price for `identifier` and `time` is available.
     * @dev Time must be in the past and the identifier must be supported.
     * @param identifier uniquely identifies the price requested. eg BTC/USD (encoded as bytes32) could be requested.
     * @param time unix timestamp for the price request.
     * @return bool if the DVM has resolved to a price for the given identifier and timestamp.
     */
    function hasPrice(bytes32 identifier, uint256 time) external view returns (bool);

    /**
     * @notice Gets the price for `identifier` and `time` if it has already been requested and resolved.
     * @dev If the price is not available, the method reverts.
     * @param identifier uniquely identifies the price requested. eg BTC/USD (encoded as bytes32) could be requested.
     * @param time unix timestamp for the price request.
     * @return int256 representing the resolved price for the given identifier and timestamp.
     */
    function getPrice(bytes32 identifier, uint256 time) external view returns (int256);
}

// File: contracts/oracle/interfaces/IdentifierWhitelistInterface.sol

pragma solidity ^0.6.0;

pragma experimental ABIEncoderV2;


/**
 * @title Interface for whitelists of supported identifiers that the oracle can provide prices for.
 */
interface IdentifierWhitelistInterface {
    /**
     * @notice Adds the provided identifier as a supported identifier.
     * @dev Price requests using this identifier will succeed after this call.
     * @param identifier bytes32 encoding of the string identifier. Eg: BTC/USD.
     */
    function addSupportedIdentifier(bytes32 identifier) external;

    /**
     * @notice Removes the identifier from the whitelist.
     * @dev Price requests using this identifier will no longer succeed after this call.
     * @param identifier bytes32 encoding of the string identifier. Eg: BTC/USD.
     */
    function removeSupportedIdentifier(bytes32 identifier) external;

    /**
     * @notice Checks whether an identifier is on the whitelist.
     * @param identifier bytes32 encoding of the string identifier. Eg: BTC/USD.
     * @return bool if the identifier is supported (or not).
     */
    function isIdentifierSupported(bytes32 identifier) external view returns (bool);
}

// File: contracts/oracle/interfaces/AdministrateeInterface.sol

pragma solidity ^0.6.0;


/**
 * @title Interface that all financial contracts expose to the admin.
 */
interface AdministrateeInterface {
    /**
     * @notice Initiates the shutdown process, in case of an emergency.
     */
    function emergencyShutdown() external;

    /**
     * @notice A core contract method called independently or as a part of other financial contract transactions.
     * @dev It pays fees and moves money between margin accounts to make sure they reflect the NAV of the contract.
     */
    function remargin() external;
}

// File: contracts/oracle/implementation/Constants.sol

pragma solidity ^0.6.0;


/**
 * @title Stores common interface names used throughout the DVM by registration in the Finder.
 */
library OracleInterfaces {
    bytes32 public constant Oracle = "Oracle";
    bytes32 public constant IdentifierWhitelist = "IdentifierWhitelist";
    bytes32 public constant Store = "Store";
    bytes32 public constant FinancialContractsAdmin = "FinancialContractsAdmin";
    bytes32 public constant Registry = "Registry";
    bytes32 public constant CollateralWhitelist = "CollateralWhitelist";
}

// File: @openzeppelin/contracts/GSN/Context.sol

pragma solidity ^0.6.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
contract Context {
    // Empty internal constructor, to prevent people from mistakenly deploying
    // an instance of this contract, which should be used via inheritance.
    constructor () internal { }

    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// File: @openzeppelin/contracts/token/ERC20/ERC20.sol

pragma solidity ^0.6.0;





/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20MinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;
    using Address for address;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name, string memory symbol) public {
        _name = name;
        _symbol = symbol;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
     *
     * This is internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}

// File: contracts/common/implementation/MultiRole.sol

pragma solidity ^0.6.0;


library Exclusive {
    struct RoleMembership {
        address member;
    }

    function isMember(RoleMembership storage roleMembership, address memberToCheck) internal view returns (bool) {
        return roleMembership.member == memberToCheck;
    }

    function resetMember(RoleMembership storage roleMembership, address newMember) internal {
        require(newMember != address(0x0), "Cannot set an exclusive role to 0x0");
        roleMembership.member = newMember;
    }

    function getMember(RoleMembership storage roleMembership) internal view returns (address) {
        return roleMembership.member;
    }

    function init(RoleMembership storage roleMembership, address initialMember) internal {
        resetMember(roleMembership, initialMember);
    }
}


library Shared {
    struct RoleMembership {
        mapping(address => bool) members;
    }

    function isMember(RoleMembership storage roleMembership, address memberToCheck) internal view returns (bool) {
        return roleMembership.members[memberToCheck];
    }

    function addMember(RoleMembership storage roleMembership, address memberToAdd) internal {
        require(memberToAdd != address(0x0), "Cannot add 0x0 to a shared role");
        roleMembership.members[memberToAdd] = true;
    }

    function removeMember(RoleMembership storage roleMembership, address memberToRemove) internal {
        roleMembership.members[memberToRemove] = false;
    }

    function init(RoleMembership storage roleMembership, address[] memory initialMembers) internal {
        for (uint256 i = 0; i < initialMembers.length; i++) {
            addMember(roleMembership, initialMembers[i]);
        }
    }
}


/**
 * @title Base class to manage permissions for the derived class.
 */
abstract contract MultiRole {
    using Exclusive for Exclusive.RoleMembership;
    using Shared for Shared.RoleMembership;

    enum RoleType { Invalid, Exclusive, Shared }

    struct Role {
        uint256 managingRole;
        RoleType roleType;
        Exclusive.RoleMembership exclusiveRoleMembership;
        Shared.RoleMembership sharedRoleMembership;
    }

    mapping(uint256 => Role) private roles;

    event ResetExclusiveMember(uint256 indexed roleId, address indexed newMember, address indexed manager);
    event AddedSharedMember(uint256 indexed roleId, address indexed newMember, address indexed manager);
    event RemovedSharedMember(uint256 indexed roleId, address indexed oldMember, address indexed manager);

    /**
     * @notice Reverts unless the caller is a member of the specified roleId.
     */
    modifier onlyRoleHolder(uint256 roleId) {
        require(holdsRole(roleId, msg.sender), "Sender does not hold required role");
        _;
    }

    /**
     * @notice Reverts unless the caller is a member of the manager role for the specified roleId.
     */
    modifier onlyRoleManager(uint256 roleId) {
        require(holdsRole(roles[roleId].managingRole, msg.sender), "Can only be called by a role manager");
        _;
    }

    /**
     * @notice Reverts unless the roleId represents an initialized, exclusive roleId.
     */
    modifier onlyExclusive(uint256 roleId) {
        require(roles[roleId].roleType == RoleType.Exclusive, "Must be called on an initialized Exclusive role");
        _;
    }

    /**
     * @notice Reverts unless the roleId represents an initialized, shared roleId.
     */
    modifier onlyShared(uint256 roleId) {
        require(roles[roleId].roleType == RoleType.Shared, "Must be called on an initialized Shared role");
        _;
    }

    /**
     * @notice Whether `memberToCheck` is a member of roleId.
     * @dev Reverts if roleId does not correspond to an initialized role.
     * @param roleId the Role ...

// [truncated — 158543 bytes total]