Forkchoice Ethereum Mainnet

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a >= b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow, so we distribute
        return (a / 2) + (b / 2) + ((a % 2 + b % 2) / 2);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../GSN/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../../GSN/Context.sol";
import "./IERC20.sol";
import "../../math/SafeMath.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name_, string memory symbol_) public {
        _name = name_;
        _symbol = symbol_;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../../GSN/Context.sol";
import "./ERC20.sol";

/**
 * @dev Extension of {ERC20} that allows token holders to destroy both their own
 * tokens and those that they have an allowance for, in a way that can be
 * recognized off-chain (via event analysis).
 */
abstract contract ERC20Burnable is Context, ERC20 {
    using SafeMath for uint256;

    /**
     * @dev Destroys `amount` tokens from the caller.
     *
     * See {ERC20-_burn}.
     */
    function burn(uint256 amount) public virtual {
        _burn(_msgSender(), amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, deducting from the caller's
     * allowance.
     *
     * See {ERC20-_burn} and {ERC20-allowance}.
     *
     * Requirements:
     *
     * - the caller must have allowance for ``accounts``'s tokens of at least
     * `amount`.
     */
    function burnFrom(address account, uint256 amount) public virtual {
        uint256 decreasedAllowance = allowance(account, _msgSender()).sub(amount, "ERC20: burn amount exceeds allowance");

        _approve(account, _msgSender(), decreasedAllowance);
        _burn(account, amount);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.6.12;

import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "@openzeppelin/contracts/token/ERC20/ERC20Burnable.sol";
import "@openzeppelin/contracts/access/Ownable.sol";


// SushiToken with Governance.
contract SigToken is ERC20, Ownable, ERC20Burnable {
    using SafeMath for uint256;
    //  Bitcoin-like supply system:
    //      50 tokens per block (however it's Ethereum ~15 seconds block vs Bitcoin 10 minutes)
    //      every 210,000 blocks is halving ~ 36 days 11 hours
    //      32 eras ~  3 years 71 days 16 hours until complete mint
    //      21,000,000 is total supply
    //
    //  i,e. if each block is about 15 seconds on average:
    //      40,320 blocks/week
    //      2,016,000 tokens/week before first halving
    //      10,500,000 total before first halving
    //
    uint256 constant MAX_MAIN_SUPPLY = 21_000_000 * 1e18;

    // the first week mint has x2 bonus     = +2,016,000
    // the second week mint has x1.5 bonus  = +1,008,000
    //
    uint256 constant BONUS_SUPPLY = 3_024_000 * 1e18;

    // so total max supply is 24,024,000 + 24 to init the uniswap pool
    uint256 constant MAX_TOTAL_SUPPLY = MAX_MAIN_SUPPLY + BONUS_SUPPLY;

    // The block number when SIG mining starts.
    uint256 public startBlock;

    uint256 constant DECIMALS_MUL = 1e18;
    uint256 constant BLOCKS_PER_WEEK = 40_320;
    uint256 constant HALVING_BLOCKS = 210_000;
    // uint265 constant INITIAL_BLOCK_REWARD = 50;

    function maxRewardMintAfterBlocks(uint256 t) public pure returns (uint256) {
        // the first week x2 mint
        if (t < BLOCKS_PER_WEEK) {
            return DECIMALS_MUL * 100 * t;
        }
        // second week x1.5 mint
        if (t < BLOCKS_PER_WEEK * 2) {
            return  DECIMALS_MUL * (100 * BLOCKS_PER_WEEK + 75 * (t - BLOCKS_PER_WEEK));
        }
        // after two weeks standard bitcoin issuance model https://en.bitcoin.it/wiki/Controlled_supply
        uint256 totalBonus = DECIMALS_MUL * (BLOCKS_PER_WEEK * 50 + BLOCKS_PER_WEEK * 25);
        assert(totalBonus >= 0);
        // how many halvings so far?
        uint256 era = t / HALVING_BLOCKS;
        assert(0 <= era);
        if (32 <= era) return MAX_TOTAL_SUPPLY;
        // total reward before current era (mul base reward 50)
        // sum : 1 + 1/2 + 1/4 … 1/2^n == 2 - 1/2^n == 1 - 1/1<<n == 1 - 1>>n
        // era reward per block (*1e18 *50)
        if (era == 0) {
            return totalBonus + DECIMALS_MUL* 50 * (t % HALVING_BLOCKS);
        }
        uint256 eraRewardPerBlock = (DECIMALS_MUL >> era);
        //        assert(0 <= eraRewardPerBlock);
        uint256 bcReward = (DECIMALS_MUL + DECIMALS_MUL - (eraRewardPerBlock<<1) ) * 50 * HALVING_BLOCKS;
        //        assert(0 <= bcReward);
        // reward in the last era which isn't over
        uint256 eraReward = eraRewardPerBlock * 50 * (t % HALVING_BLOCKS);
        //        assert(0 <= eraReward);
        uint256 result = totalBonus + bcReward + eraReward;
        assert(0 <= result);
        return result;
    }

    constructor(
        uint256 _tinyMint
    ) public ERC20("xSigma", "SIG") {
        // dev needs a little of  SIG tokens for uniswap SIG/ETH initialization
        _mint(msg.sender, _tinyMint);
    }



    /// @notice Creates `_amount` token to `_to`. Must only be called by the owner (MasterChef).
    function mint(address _to, uint256 _amount) public onlyOwner {
        _mint(_to, _amount);
        _moveDelegates(address(0), _delegates[_to], _amount);
    }

    // Copied and modified from YAM code:
    // https://github.com/yam-finance/yam-protocol/blob/master/contracts/token/YAMGovernanceStorage.sol
    // https://github.com/yam-finance/yam-protocol/blob/master/contracts/token/YAMGovernance.sol
    // Which is copied and modified from COMPOUND:
    // https://github.com/compound-finance/compound-protocol/blob/master/contracts/Governance/Comp.sol

    /// @dev A record of each accounts delegate
    mapping (address => address) internal _delegates;

    /// @notice A checkpoint for marking number of votes from a given block
    struct Checkpoint {
        uint32 fromBlock;
        uint256 votes;
    }

    /// @notice A record of votes checkpoints for each account, by index
    mapping (address => mapping (uint32 => Checkpoint)) public checkpoints;

    /// @notice The number of checkpoints for each account
    mapping (address => uint32) public numCheckpoints;

    /// @notice The EIP-712 typehash for the contract's domain
    bytes32 public constant DOMAIN_TYPEHASH = keccak256("EIP712Domain(string name,uint256 chainId,address verifyingContract)");

    /// @notice The EIP-712 typehash for the delegation struct used by the contract
    bytes32 public constant DELEGATION_TYPEHASH = keccak256("Delegation(address delegatee,uint256 nonce,uint256 expiry)");

    /// @notice A record of states for signing / validating signatures
    mapping (address => uint) public nonces;

    /// @notice An event thats emitted when an account changes its delegate
    event DelegateChanged(address indexed delegator, address indexed fromDelegate, address indexed toDelegate);

    /// @notice An event thats emitted when a delegate account's vote balance changes
    event DelegateVotesChanged(address indexed delegate, uint previousBalance, uint newBalance);

    /**
     * @notice Delegate votes from `msg.sender` to `delegatee`
     * @param delegator The address to get delegatee for
     */
    function delegates(address delegator) external view returns (address) {
        return _delegates[delegator];
    }

    /**
     * @notice Delegate votes from `msg.sender` to `delegatee`
     * @param delegatee The address to delegate votes to
     */
    function delegate(address delegatee) external {
        return _delegate(msg.sender, delegatee);
    }

    /**
     * @notice Delegates votes from signatory to `delegatee`
     * @param delegatee The address to delegate votes to
     * @param nonce The contract state required to match the signature
     * @param expiry The time at which to expire the signature
     * @param v The recovery byte of the signature
     * @param r Half of the ECDSA signature pair
     * @param s Half of the ECDSA signature pair
     */
    function delegateBySig(address delegatee, uint nonce, uint expiry, uint8 v, bytes32 r, bytes32 s) external {
        bytes32 domainSeparator = keccak256(abi.encode(DOMAIN_TYPEHASH, keccak256(bytes(name())), getChainId(), address(this)));
        bytes32 structHash = keccak256(abi.encode(DELEGATION_TYPEHASH, delegatee, nonce, expiry));
        bytes32 digest = keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
        address signatory = ecrecover(digest, v, r, s);
        require(signatory != address(0), "SIG::delegateBySig: invalid signature");
        require(nonce == nonces[signatory]++, "SIG::delegateBySig: invalid nonce");
        require(now <= expiry, "SIG::delegateBySig: signature expired");
        return _delegate(signatory, delegatee);
    }

    /**
     * @notice Gets the current votes balance for `account`
     * @param account The address to get votes balance
     * @return The number of current votes for `account`
     */
    function getCurrentVotes(address account) external view returns (uint256) {
        uint32 nCheckpoints = numCheckpoints[account];
        return nCheckpoints > 0 ? checkpoints[account][nCheckpoints - 1].votes : 0;
    }

    /**
     * @notice Determine the prior number of votes for an account as of a block number
     * @dev Block number must be a finalized block or else this function will revert to prevent misinformation.
     * @param account The address of the account to check
     * @param blockNumber The block number to get the vote balance at
     * @return The number of votes the account had as of the given block
     */
    function getPriorVotes(address account, uint blockNumber) external view returns (uint256) {
        require(blockNumber < block.number, "SIG::getPriorVotes: not yet determined");

        uint32 nCheckpoints = numCheckpoints[account];
        if (nCheckpoints == 0) {
            return 0;
        }

        // First check most recent balance
        if (checkpoints[account][nCheckpoints - 1].fromBlock <= blockNumber) {
            return checkpoints[account][nCheckpoints - 1].votes;
        }

        // Next check implicit zero balance
        if (checkpoints[account][0].fromBlock > blockNumber) {
            return 0;
        }

        uint32 lower = 0;
        uint32 upper = nCheckpoints - 1;
        while (upper > lower) {
            uint32 center = upper - (upper - lower) / 2; // ceil, avoiding overflow
            Checkpoint memory cp = checkpoints[account][center];
            if (cp.fromBlock == blockNumber) {
                return cp.votes;
            } else if (cp.fromBlock < blockNumber) {
                lower = center;
            } else {
                upper = center - 1;
            }
        }
        return checkpoints[account][lower].votes;
    }

    function _delegate(address delegator, address delegatee) internal {
        address currentDelegate = _delegates[delegator];
        uint256 delegatorBalance = balanceOf(delegator); // balance of underlying SIGs (not scaled);
        _delegates[delegator] = delegatee;

        emit DelegateChanged(delegator, currentDelegate, delegatee);

        _moveDelegates(currentDelegate, delegatee, delegatorBalance);
    }

    function _moveDelegates(address srcRep, address dstRep, uint256 amount) internal {
        if (srcRep != dstRep && amount > 0) {
            if (srcRep != address(0)) {
                // decrease old representative
                uint32 srcRepNum = numCheckpoints[srcRep];
                uint256 srcRepOld = srcRepNum > 0 ? checkpoints[srcRep][srcRepNum - 1].votes : 0;
                uint256 srcRepNew = srcRepOld.sub(amount);
                _writeCheckpoint(srcRep, srcRepNum, srcRepOld, srcRepNew);
            }

            if (dstRep != address(0)) {
                // increase new representative
                uint32 dstRepNum = numCheckpoints[dstRep];
                uint256 dstRepOld = dstRepNum > 0 ? checkpoints[dstRep][dstRepNum - 1].votes : 0;
                uint256 dstRepNew = dstRepOld.add(amount);
                _writeCheckpoint(dstRep, dstRepNum, dstRepOld, dstRepNew);
            }
        }
    }

    function _writeCheckpoint(address delegatee, uint32 nCheckpoints, uint256 oldVotes, uint256 newVotes) internal {
        uint32 blockNumber = safe32(block.number, "SIG::_writeCheckpoint: block number exceeds 32 bits");

        if (nCheckpoints > 0 && checkpoints[delegatee][nCheckpoints - 1].fromBlock == blockNumber) {
            checkpoints[delegatee][nCheckpoints - 1].votes = newVotes;
        } else {
            checkpoints[delegatee][nCheckpoints] = Checkpoint(blockNumber, newVotes);
            numCheckpoints[delegatee] = nCheckpoints + 1;
        }

        emit DelegateVotesChanged(delegatee, oldVotes, newVotes);
    }

    function safe32(uint n, string memory errorMessage) internal pure returns (uint32) {
        require(n < 2**32, errorMessage);
        return uint32(n);
    }

    function getChainId() internal pure returns (uint) {
        uint256 chainId;
        assembly { chainId := chainid() }
        return chainId;
    }
}

// SPDX-License-Identifier: MIT
// Fork of Swerve's YPoolDelegator https://etherscan.io/address/0x329239599afB305DA0A2eC69c58F8a6697F9F88d#code

pragma solidity 0.6.12;
pragma experimental ABIEncoderV2;

import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "@openzeppelin/contracts/math/Math.sol";
import "./SigToken.sol";

contract SigThreePoolProxy {
    uint256 constant N_COINS = 3;
    address[] public coins;
    uint256[] public balances;

    uint256 constant FEE_DENOMINATOR = 10* 10 ** 9;
    uint256 constant MAX_ADMIN_FEE = 10 * 10 ** 9; // 1%
    uint256 constant MAX_FEE = 5 * 10 ** 9;        // 0.5%
    uint256 public fee;
    uint256 public admin_fee;
    
    address public owner;
    address token;
    
    uint256 public initial_A;
    uint256 public future_A;
    uint256 public initial_A_time;
    uint256 public future_A_time;
    
    uint256 public admin_actions_deadline;
    uint256 public transfer_ownership_deadline;
    uint256 public future_fee;
    uint256 public future_admin_fee;
    address public future_owner;
    // fill the rest of current slot to fix https://github.com/vyperlang/vyper/issues/2270
    uint64 public slot_fill_0;
    uint32 public slot_fill_1;

    bool is_killed;
    uint256 kill_deadline;
    uint256 constant KILL_DEADLINE_DT = 2 * 30 * 86400;

    // following 3 variables aren't part of proxy implementation and go after all 3pool's variables
    address delegationTarget;
    address dutchAuction;
    SigToken sigToken;
    
    constructor(
        address _owner,
        address[N_COINS] memory _coinsIn,
        address _pool_token,
        uint256 _A,
        uint256 _fee,
        uint256 _admin_fee,
        // additional variables
        address _delegationTarget,
        address _dutchAuction,
        SigToken _sigToken
    ) public {
        for (uint256 i = 0; i < N_COINS; i++) {
            require(_coinsIn[i] != address(0));
            balances.push(0);
            coins.push(_coinsIn[i]);
        }
        initial_A = _A;
        future_A = _A;
        fee = _fee;
        admin_fee = _admin_fee;
        owner = _owner;
        is_killed = false;
        kill_deadline = block.timestamp + KILL_DEADLINE_DT;
        token = _pool_token;
        // gas can be optimized if used constant instead of variables
        delegationTarget = _delegationTarget;
        dutchAuction = _dutchAuction;
        sigToken = _sigToken;
    }

    // template from https://github.com/OpenZeppelin/openzeppelin-sdk/blob/master/packages/lib/contracts/upgradeability/Proxy.sol
    /**
     * @dev Delegates the current call to `implementation`.
     *
     * This function does not return to its internal call site, it will return directly to the external caller.
     */
    function _delegate(address implementation) internal {
        //        // solhint-disable-next-line no-inline-assembly
        assembly {
        // Copy msg.data. We take full control of memory in this inline assembly
        // block because it will not return to Solidity code. We overwrite the
        // Solidity scratch pad at memory position 0.
            calldatacopy(0, 0, calldatasize())

        // Call the implementation.
        // out and outsize are 0 because we don't know the size yet.
            let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)

        // Copy the returned data.
            returndatacopy(0, 0, returndatasize())

            switch result
            // delegatecall returns 0 on error.
            case 0 { revert(0, returndatasize()) }
            default { return(0, returndatasize()) }
        }
    }

    fallback () external {
        _delegate(delegationTarget);
    }

    receive () external payable {}

    // this function can be called by anyone, but fees go directly to the auction
    function withdraw_admin_fees() public {
        for (uint256 i = 0; i < N_COINS; i++) {
            IERC20 coin = IERC20(coins[i]);
            uint256 value = IERC20(coin).balanceOf(address(this)) - balances[i];
            if (value > 0) {
                coin.transfer(dutchAuction, value);
            }
        }
    }

    function changeAuction(address newAuction) public {
        require(msg.sender == owner);
        dutchAuction = newAuction;
    }

    /**
    * @dev
    * The code below implements an additional exchange2 function, which does normal exchange delegate call
    * plus gives users some cashback, if possible
    */
    uint256 constant CASHBACK_EXCHANGE_THRESHOLD_0 = 1000e18; // at least 1000 stablecoins to get reward
    uint256 constant CASHBACK_SIG_LOW_AMOUNT = 30e18;
    uint256 constant CASHBACK_SIG_HIGH_AMOUNT = 100e18;
    uint256 constant CASHBACK_MAX_GAS_PRICE = 100e9; // 100 gwei

    uint256 startBlock;
    uint256 endBlock;
    int256 a;
    int256 c;

    /**
     * @notice Set parameters for cashback, such that
     *          availableCashbackEther(startBlock) = initCashback
     *          availableCashbackEther(endBlock) = totalCashback >= initCashback
     * @param _startBlock - first block of the cashback
     * @param _endBlock - last block of the cashback
     * @param initCashback - about of ETH cashback available at _startBlock
     * @param totalCashback - total amount of ETH available at _endBlock
     *
     */
    function setCashbackEther(
        uint256 _startBlock,
        uint256 _endBlock,
        int256 initCashback,
        int256 totalCashback
    ) public payable {
        require(msg.sender == owner, "msg.sender == owner");
        require(address(this).balance >= uint256(totalCashback), "balance < totalCashback");
        startBlock = _startBlock;
        endBlock = _endBlock;
        // t := (block.number - _startBlock) <=> t from 0 .. E
        // l(t) := a*t + b is a line, such
        // l(0) = a*0 + b = init
        // l(E) = a*E + b = total
        //
        // ethPerBlock*(block.number - _startBlock) + initCashback = totalCashback unlocked so far until block.number]
        //
        // B := contract balance(t = 0)
        // safe(t) - how much of balance is untouchable
        // safe(0) = B - init
        // safe(E) = B - total
        // safe(t) = B - l(t) = B - (a*t + b) = B-b - a*t;
        // allow to spend (t) = balance(t) - safe(t) = balance(t) - (B-b - a*t) = balance(t) - B+b + a*t =
        // = balance(t) + a*t + c, where c = b-B;
        // <=> c = init - balance(_startBlock);
        a = (totalCashback - initCashback) / int256(_endBlock - _startBlock);
        c = initCashback - int256(address(this).balance);
        // allow to spend (t) = balance(t) + a*t + c
    }

    /**
     * @notice how mush ETH is available for the cashback at the currBlock
     *      invariant: availableCashbackEther(t) <= address(this).balance
     *      to keep invariant: we **MUST** use address(this).balance in calc
     */
    function availableCashbackEther(uint256 currBlock) view public returns(uint256) {
        if (currBlock < startBlock || endBlock < currBlock) return 0;
        return uint256(int256(address(this).balance) + a * int256(currBlock - startBlock) + c);
    }
    /**
     * @notice how much cashback tx.origin would get if there's full funding
     */
    function entitledCashbackEther(uint256 txGasPrice) public view returns (uint256) {
        // people who trade via contract calc with 50% penalty
        uint256 sigBalance = (sigToken.balanceOf(tx.origin) + sigToken.balanceOf(msg.sender)) / 2;
        if (sigBalance < CASHBACK_SIG_LOW_AMOUNT) return 0;
        // level from 0 ... CASHBACK_SIG_HIGH_AMOUNT linear
        uint256 cashBackLevel = Math.min(sigBalance, CASHBACK_SIG_HIGH_AMOUNT);
        // does user use reasonable gasprice?
        uint256 gasPrice = Math.min(txGasPrice, CASHBACK_MAX_GAS_PRICE);
        // 100_000 gas units - maximum cashback
        uint256 gasUnitsCashback = (100_000 * cashBackLevel / CASHBACK_SIG_HIGH_AMOUNT);
        return gasUnitsCashback * gasPrice;
    }

    function payCashbackEther(int128 coinId, uint256 amount) private {
        // coinId = 0 => DAI(1e18), 1||2 => USDC||USDT(1e6), so make them all 1e18
        if (coinId != 0) amount *= 1e12;
        // to whom should we give cashback?
        if (amount >= CASHBACK_EXCHANGE_THRESHOLD_0) {
            // how much ETH are we ready to spend?
            uint256 availableEth = availableCashbackEther(block.number);
            // how much cashback to give?
            // use not all availableEth but some part that it depleted gradually rather than completely after certain payback
            uint256 cashback = Math.min(entitledCashbackEther(tx.gasprice), availableEth * 1/10);
            tx.origin.transfer(cashback);
        }
    }

    // the same code as of above function, but for view only
    function calcCashbackEther(int128 coinId, uint256 amount, uint256 txGasPrice) public view returns (uint256) {
        // coinId = 0 => DAI(1e18), 1||2 => USDC||USDT(1e6), so make them all 1e18
        if (coinId != 0) amount *= 1e12;
        // to whom should we give cashback?
        if (amount >= CASHBACK_EXCHANGE_THRESHOLD_0) {
            // how much ETH are we ready to spend?
            uint256 availableEth = availableCashbackEther(block.number);
            // how much cashback to give?
            // use not all availableEth but some part that it depleted gradually rather than completely after certain payback
            uint256 cashback = Math.min(entitledCashbackEther(txGasPrice), availableEth * 1/10);
            return cashback;
        }
        return 0;
    }

    function exchange2(int128 i, int128 j, uint256 dx, uint256 min_dy) public {
        (bool success, bytes memory result) = delegationTarget.delegatecall(
              abi.encodeWithSignature("exchange(int128,int128,uint256,uint256)", i, j, dx, min_dy)
            // signature of exchange(int128,int128,uint256,uint256) - 0x3df02124
        );
        if (!success) {
            if (result.length > 0) {
                revert(string(result));
            } else {
                revert();
            }
        }
        // give cashback
        payCashbackEther(i, dx);
    }

}