Cryo Explorer Ethereum Mainnet

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (interfaces/draft-IERC6093.sol)
pragma solidity ^0.8.20;

/**
 * @dev Standard ERC-20 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-20 tokens.
 */
interface IERC20Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC20InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC20InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     * @param allowance Amount of tokens a `spender` is allowed to operate with.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC20InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC20InvalidSpender(address spender);
}

/**
 * @dev Standard ERC-721 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-721 tokens.
 */
interface IERC721Errors {
    /**
     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in ERC-20.
     * Used in balance queries.
     * @param owner Address of the current owner of a token.
     */
    error ERC721InvalidOwner(address owner);

    /**
     * @dev Indicates a `tokenId` whose `owner` is the zero address.
     * @param tokenId Identifier number of a token.
     */
    error ERC721NonexistentToken(uint256 tokenId);

    /**
     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param tokenId Identifier number of a token.
     * @param owner Address of the current owner of a token.
     */
    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC721InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC721InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param tokenId Identifier number of a token.
     */
    error ERC721InsufficientApproval(address operator, uint256 tokenId);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC721InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC721InvalidOperator(address operator);
}

/**
 * @dev Standard ERC-1155 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-1155 tokens.
 */
interface IERC1155Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     * @param tokenId Identifier number of a token.
     */
    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC1155InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC1155InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param owner Address of the current owner of a token.
     */
    error ERC1155MissingApprovalForAll(address operator, address owner);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC1155InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC1155InvalidOperator(address operator);

    /**
     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.
     * Used in batch transfers.
     * @param idsLength Length of the array of token identifiers
     * @param valuesLength Length of the array of token amounts
     */
    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.3.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "./IERC20.sol";
import {IERC20Metadata} from "./extensions/IERC20Metadata.sol";
import {Context} from "../../utils/Context.sol";
import {IERC20Errors} from "../../interfaces/draft-IERC6093.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC-20
 * applications.
 */
abstract contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors {
    mapping(address account => uint256) private _balances;

    mapping(address account => mapping(address spender => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * Both values are immutable: they can only be set once during construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `value`.
     */
    function transfer(address to, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, value);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, value);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Skips emitting an {Approval} event indicating an allowance update. This is not
     * required by the ERC. See {xref-ERC20-_approve-address-address-uint256-bool-}[_approve].
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `value`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `value`.
     */
    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, value);
        _transfer(from, to, value);
        return true;
    }

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _transfer(address from, address to, uint256 value) internal {
        if (from == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        if (to == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(from, to, value);
    }

    /**
     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
     * this function.
     *
     * Emits a {Transfer} event.
     */
    function _update(address from, address to, uint256 value) internal virtual {
        if (from == address(0)) {
            // Overflow check required: The rest of the code assumes that totalSupply never overflows
            _totalSupply += value;
        } else {
            uint256 fromBalance = _balances[from];
            if (fromBalance < value) {
                revert ERC20InsufficientBalance(from, fromBalance, value);
            }
            unchecked {
                // Overflow not possible: value <= fromBalance <= totalSupply.
                _balances[from] = fromBalance - value;
            }
        }

        if (to == address(0)) {
            unchecked {
                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
                _totalSupply -= value;
            }
        } else {
            unchecked {
                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
                _balances[to] += value;
            }
        }

        emit Transfer(from, to, value);
    }

    /**
     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
     * Relies on the `_update` mechanism
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _mint(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(address(0), account, value);
    }

    /**
     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
     * Relies on the `_update` mechanism.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead
     */
    function _burn(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        _update(account, address(0), value);
    }

    /**
     * @dev Sets `value` as the allowance of `spender` over the `owner`'s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(address owner, address spender, uint256 value) internal {
        _approve(owner, spender, value, true);
    }

    /**
     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
     *
     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
     * `Approval` event during `transferFrom` operations.
     *
     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
     * true using the following override:
     *
     * ```solidity
     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
     *     super._approve(owner, spender, value, true);
     * }
     * ```
     *
     * Requirements are the same as {_approve}.
     */
    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
        if (owner == address(0)) {
            revert ERC20InvalidApprover(address(0));
        }
        if (spender == address(0)) {
            revert ERC20InvalidSpender(address(0));
        }
        _allowances[owner][spender] = value;
        if (emitEvent) {
            emit Approval(owner, spender, value);
        }
    }

    /**
     * @dev Updates `owner`'s allowance for `spender` based on spent `value`.
     *
     * Does not update the allowance value in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Does not emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance < type(uint256).max) {
            if (currentAllowance < value) {
                revert ERC20InsufficientAllowance(spender, currentAllowance, value);
            }
            unchecked {
                _approve(owner, spender, currentAllowance - value, false);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC-20 standard as defined in the ERC.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/ERC20Burnable.sol)

pragma solidity ^0.8.20;

import {ERC20} from "../ERC20.sol";
import {Context} from "../../../utils/Context.sol";

/**
 * @dev Extension of {ERC20} that allows token holders to destroy both their own
 * tokens and those that they have an allowance for, in a way that can be
 * recognized off-chain (via event analysis).
 */
abstract contract ERC20Burnable is Context, ERC20 {
    /**
     * @dev Destroys a `value` amount of tokens from the caller.
     *
     * See {ERC20-_burn}.
     */
    function burn(uint256 value) public virtual {
        _burn(_msgSender(), value);
    }

    /**
     * @dev Destroys a `value` amount of tokens from `account`, deducting from
     * the caller's allowance.
     *
     * See {ERC20-_burn} and {ERC20-allowance}.
     *
     * Requirements:
     *
     * - the caller must have allowance for ``accounts``'s tokens of at least
     * `value`.
     */
    function burnFrom(address account, uint256 value) public virtual {
        _spendAllowance(account, _msgSender(), value);
        _burn(account, value);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC-20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

pragma solidity >=0.8.9;

interface IToken {
    function creator() external view returns (address);
}

interface IWETH {
    function withdraw(uint256 amount) external;
}

interface IUniswapV3Factory {
    function getPool(address tokenA, address tokenB, uint24 fee) external view returns (address);
}

interface ISwapRouter02 {
    struct ExactInputSingleParams {
        address tokenIn;
        address tokenOut;
        uint24 fee;
        address recipient;
        uint256 amountIn;
        uint256 amountOutMinimum;
        uint160 sqrtPriceLimitX96;
    }

    function exactInputSingle(ExactInputSingleParams calldata params)
        external
        payable
        returns (uint256 amountOut);
}

interface INonfungiblePositionManager {
    struct MintParams {
        address token0;
        address token1;
        uint24 fee;
        int24 tickLower;
        int24 tickUpper;
        uint256 amount0Desired;
        uint256 amount1Desired;
        uint256 amount0Min;
        uint256 amount1Min;
        address recipient;
        uint256 deadline;
    }

    function factory() external view returns (address);
    function WETH9() external view returns (address);

    function positions(uint256 tokenId) external view returns (
        uint96 nonce,
        address operator,
        address token0,
        address token1,
        uint24 fee,
        int24 tickLower,
        int24 tickUpper,
        uint128 liquidity,
        uint256 feeGrowthInside0LastX128,
        uint256 feeGrowthInside1LastX128,
        uint128 tokensOwed0,
        uint128 tokensOwed1
    );

    function createAndInitializePoolIfNecessary(
        address token0,
        address token1,
        uint24 fee,
        uint160 sqrtPriceX96
    ) external returns (address pool);

    function mint(MintParams calldata params) external returns (
        uint256 tokenId,
        uint128 liquidity,
        uint256 amount0,
        uint256 amount1
    );

    struct CollectParams {
        uint256 tokenId;
        address recipient;
        uint128 amount0Max;
        uint128 amount1Max;
    }

    function collect(CollectParams calldata params) external payable returns (
        uint256 amount0,
        uint256 amount1
    );

    function getApproved(uint256 tokenId) external view returns (address);
    function isApprovedForAll(address owner, address operator) external view returns (bool);
    function ownerOf(uint256 tokenId) external view returns (address);
}


contract Factory {
    event ERC20TokenCreated(address tokenAddress);

    struct TokenInfo {
        address tokenAddress;
        string name;
        string symbol;
        address deployer;
        uint256 time;
        string metadata;
        uint256 marketCapInETH;
    }

    mapping(uint256 => TokenInfo) public deployedTokens;
    uint256 public tokenCount = 0;
    address public platformController;

    address public constant POSITION_MANAGER = 0xC36442b4a4522E871399CD717aBDD847Ab11FE88;
    uint256 constant Q96 = 2 ** 96;
    address public constant WETH = 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2;
    address public constant SWAP_ROUTER = 0x68b3465833fb72A70ecDF485E0e4C7bD8665Fc45; // SwapRouter02

    uint24 private constant FEE_TIER = 10000;
    uint256 private constant VIRTUAL_ETH = 1.5 ether;

    event TokenPurchased(address buyer, address tokenOut, uint256 ethSpent, uint256 tokensReceived);

    constructor() {
        platformController = msg.sender;
    }

    receive() external payable {}

    function deployCoin(string memory _name, string memory _symbol, string memory _metadata) public payable {
        Token t = new Token(_name, _symbol, msg.sender, address(this));
        emit ERC20TokenCreated(address(t));

        address coin_address = address(t);
        provideLiquidity(coin_address, WETH);

        if(msg.value>0){
            ISwapRouter02(SWAP_ROUTER).exactInputSingle{ value: msg.value }(
                ISwapRouter02.ExactInputSingleParams({
                    tokenIn: WETH,
                    tokenOut: coin_address,
                    fee: 10000,
                    recipient: msg.sender,
                    amountIn: msg.value,
                    amountOutMinimum: 0,
                    sqrtPriceLimitX96: 0
                })
            );
        }

        deployedTokens[tokenCount] = TokenInfo({
            tokenAddress: coin_address,
            name: _name,
            symbol: _symbol,
            deployer: msg.sender,
            time: block.timestamp,
            metadata: _metadata,
            marketCapInETH: 0
        });
        tokenCount++;
    }

    function getDeploysByPage(uint256 page, uint256 order) public view returns (TokenInfo[] memory) {
        uint256 itemsPerPage = 50;
        require(tokenCount > 0, "No tokens deployed");

        uint256 totalPages = (tokenCount + itemsPerPage - 1) / itemsPerPage;
        require(page < totalPages, "Page out of range");

        uint256 start;
        uint256 end;
        uint256 j = 0;

        if (order == 0) {
            // Newest first
            start = tokenCount > (page + 1) * itemsPerPage ? tokenCount - (page + 1) * itemsPerPage : 0;
            end = tokenCount - page * itemsPerPage;
            if (end > tokenCount) end = tokenCount;
        } else {
            // Oldest first
            start = page * itemsPerPage;
            end = start + itemsPerPage;
            if (end > tokenCount) end = tokenCount;
        }

        TokenInfo[] memory tokens = new TokenInfo[](end - start);
        address weth = INonfungiblePositionManager(POSITION_MANAGER).WETH9();
        address factory = INonfungiblePositionManager(POSITION_MANAGER).factory();

        for (uint256 i = start; i < end; i++) {
            uint256 index = order == 0 ? end - 1 - (i - start) : i;
            TokenInfo memory info = deployedTokens[index];

            uint256 marketCap = 0;
            address pool = IUniswapV3Factory(factory).getPool(info.tokenAddress, weth, 10000);
            if (pool != address(0)) {
                uint256 wethInPool = IERC20(weth).balanceOf(pool);
                uint256 tokenInPool = IERC20(info.tokenAddress).balanceOf(pool);
                uint256 totalSupply = IERC20(info.tokenAddress).totalSupply();

                if (tokenInPool > 0) {
                    marketCap = ((wethInPool + 1.5 ether) * totalSupply) / tokenInPool;
                }
            }

            tokens[j++] = TokenInfo({
                tokenAddress: info.tokenAddress,
                name: info.name,
                symbol: info.symbol,
                deployer: info.deployer,
                time: info.time,
                metadata: info.metadata,
                marketCapInETH: marketCap
            });
        }

        return tokens;
    }



    function withdrawFees() external {
        require(msg.sender == platformController, "Caller is not controller");
        uint256 wethBalance = IERC20(WETH).balanceOf(address(this));
        require(wethBalance > 0, "No WETH to withdraw");

        IWETH(WETH).withdraw(wethBalance);

        (bool success, ) = msg.sender.call{ value: wethBalance }("");
        require(success, "ETH transfer failed");
    }


    function uint2str(uint256 _i) internal pure returns (string memory) {
        if (_i == 0) return "0";
        uint256 j = _i;
        uint256 length;
        while (j != 0) {
            length++;
            j /= 10;
        }
        bytes memory bstr = new bytes(length);
        uint256 k = length;
        j = _i;
        while (j != 0) {
            bstr[--k] = bytes1(uint8(48 + j % 10));
            j /= 10;
        }
        return string(bstr);
    }

    function provideLiquidity(address tokenA, address tokenB) public {
        bool tokenAIsToken0 = tokenA < tokenB;
        
        address token0 = tokenAIsToken0 ? tokenA : tokenB;
        address token1 = tokenAIsToken0 ? tokenB : tokenA;

        IERC20(token0).approve(POSITION_MANAGER, type(uint256).max);
        IERC20(token1).approve(POSITION_MANAGER, type(uint256).max);

        INonfungiblePositionManager manager = INonfungiblePositionManager(POSITION_MANAGER);

        uint160 sqrtPriceX96 = tokenAIsToken0
            ? 3068365595550320841079178
            : 2045645379722529521098596513701367;

        int24 tickLower = tokenAIsToken0 ? int24(-203000) : int24(-887200);
        int24 tickUpper = tokenAIsToken0 ? int24(887200) : int24(203000);

        uint256 amount0Desired = tokenAIsToken0 ? 1000000000000000000000000000 : 0;
        uint256 amount1Desired = tokenAIsToken0 ? 0 : 1000000000000000000000000000;

        manager.createAndInitializePoolIfNecessary(token0, token1, 10000, sqrtPriceX96);

        manager.mint(
            INonfungiblePositionManager.MintParams({
                token0: token0,
                token1: token1,
                fee: 10000,
                tickLower: tickLower,
                tickUpper: tickUpper,
                amount0Desired: amount0Desired,
                amount1Desired: amount1Desired,
                amount0Min: 0,
                amount1Min: 0,
                recipient: address(this),
                deadline: block.timestamp
            })
        );
    }



    function collectFees(uint256 tokenId) external returns (uint256 amount0, uint256 amount1) {
        address token0 = getToken0Address(tokenId);
        (, , , address token1, , , , , , , , ) =
            INonfungiblePositionManager(POSITION_MANAGER).positions(tokenId);

        require(IToken(token0).creator() == msg.sender, "Caller is not creator of token0");

        // Record balances before
        uint256 beforeToken0 = IERC20(token0).balanceOf(address(this));
        uint256 beforeToken1 = IERC20(token1).balanceOf(address(this));

        // Collect fees to contract itself
        INonfungiblePositionManager.CollectParams memory params = INonfungiblePositionManager.CollectParams({
            tokenId: tokenId,
            recipient: address(this),
            amount0Max: type(uint128).max,
            amount1Max: type(uint128).max
        });

        INonfungiblePositionManager(POSITION_MANAGER).collect(params);

        // Calculate collected amounts
        uint256 collected0 = IERC20(token0).balanceOf(address(this)) - beforeToken0;
        uint256 collected1 = IERC20(token1).balanceOf(address(this)) - beforeToken1;

        if (collected0 > 0) {
            IERC20(token0).transfer(msg.sender, collected0);
        }
        if (collected1 > 0) {
            IERC20(token1).transfer(msg.sender, collected1/2);
        }

        return (collected0, collected1);
    }


    function getToken0Address(uint256 tokenId) public view returns (address token0) {
        ( , , token0, , , , , , , , , ) =
            INonfungiblePositionManager(POSITION_MANAGER).positions(tokenId);
    }

}


// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import "@openzeppelin/contracts/token/ERC20/extensions/ERC20Burnable.sol";
import "@openzeppelin/contracts/token/ERC20/ERC20.sol";

contract Token is ERC20, ERC20Burnable {
    address public platform;
    address public creator;

    constructor(
        string memory _name,
        string memory _symbol,
        address _creator,
        address _platform
    ) ERC20(_name, _symbol) {
        platform = _platform;
        creator = _creator;
        _mint(_platform, 1000000000 * 10 ** decimals());
    }
}