Cryo Explorer Ethereum Mainnet

// Sources flattened with hardhat v2.11.1 https://hardhat.org

// File contracts/CatzNDogz.sol

// Sources flattened with hardhat v2.10.2 https://hardhat.org

// File @openzeppelin/contracts/utils/[email protected]

// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}


// File @limitbreak/creator-token-contracts/contracts/access/[email protected]

pragma solidity ^0.8.4;

abstract contract OwnablePermissions is Context {
    function _requireCallerIsContractOwner() internal view virtual;
}


// File @openzeppelin/contracts/utils/introspection/[email protected]

// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}


// File @limitbreak/creator-token-contracts/contracts/interfaces/[email protected]

pragma solidity ^0.8.4;

interface IEOARegistry is IERC165 {
    function isVerifiedEOA(address account) external view returns (bool);
}


// File @limitbreak/creator-token-contracts/contracts/utils/[email protected]

pragma solidity ^0.8.4;

enum AllowlistTypes {
    Operators,
    PermittedContractReceivers
}

enum ReceiverConstraints {
    None,
    NoCode,
    EOA
}

enum CallerConstraints {
    None,
    OperatorWhitelistEnableOTC,
    OperatorWhitelistDisableOTC
}

enum StakerConstraints {
    None,
    CallerIsTxOrigin,
    EOA
}

enum TransferSecurityLevels {
    Zero,
    One,
    Two,
    Three,
    Four,
    Five,
    Six
}

struct TransferSecurityPolicy {
    CallerConstraints callerConstraints;
    ReceiverConstraints receiverConstraints;
}

struct CollectionSecurityPolicy {
    TransferSecurityLevels transferSecurityLevel;
    uint120 operatorWhitelistId;
    uint120 permittedContractReceiversId;
}


// File @limitbreak/creator-token-contracts/contracts/interfaces/[email protected]

pragma solidity ^0.8.4;

interface ITransferSecurityRegistry {
    event AddedToAllowlist(AllowlistTypes indexed kind, uint256 indexed id, address indexed account);
    event CreatedAllowlist(AllowlistTypes indexed kind, uint256 indexed id, string indexed name);
    event ReassignedAllowlistOwnership(AllowlistTypes indexed kind, uint256 indexed id, address indexed newOwner);
    event RemovedFromAllowlist(AllowlistTypes indexed kind, uint256 indexed id, address indexed account);
    event SetAllowlist(AllowlistTypes indexed kind, address indexed collection, uint120 indexed id);
    event SetTransferSecurityLevel(address indexed collection, TransferSecurityLevels level);

    function createOperatorWhitelist(string calldata name) external returns (uint120);
    function createPermittedContractReceiverAllowlist(string calldata name) external returns (uint120);
    function reassignOwnershipOfOperatorWhitelist(uint120 id, address newOwner) external;
    function reassignOwnershipOfPermittedContractReceiverAllowlist(uint120 id, address newOwner) external;
    function renounceOwnershipOfOperatorWhitelist(uint120 id) external;
    function renounceOwnershipOfPermittedContractReceiverAllowlist(uint120 id) external;
    function setTransferSecurityLevelOfCollection(address collection, TransferSecurityLevels level) external;
    function setOperatorWhitelistOfCollection(address collection, uint120 id) external;
    function setPermittedContractReceiverAllowlistOfCollection(address collection, uint120 id) external;
    function addOperatorToWhitelist(uint120 id, address operator) external;
    function addPermittedContractReceiverToAllowlist(uint120 id, address receiver) external;
    function removeOperatorFromWhitelist(uint120 id, address operator) external;
    function removePermittedContractReceiverFromAllowlist(uint120 id, address receiver) external;
    function getCollectionSecurityPolicy(address collection) external view returns (CollectionSecurityPolicy memory);
    function getWhitelistedOperators(uint120 id) external view returns (address[] memory);
    function getPermittedContractReceivers(uint120 id) external view returns (address[] memory);
    function isOperatorWhitelisted(uint120 id, address operator) external view returns (bool);
    function isContractReceiverPermitted(uint120 id, address receiver) external view returns (bool);
}


// File @limitbreak/creator-token-contracts/contracts/interfaces/[email protected]

pragma solidity ^0.8.4;

interface ITransferValidator {
    function applyCollectionTransferPolicy(address caller, address from, address to) external view;
}


// File @limitbreak/creator-token-contracts/contracts/interfaces/[email protected]

pragma solidity ^0.8.4;



interface ICreatorTokenTransferValidator is ITransferSecurityRegistry, ITransferValidator, IEOARegistry {}


// File @limitbreak/creator-token-contracts/contracts/interfaces/[email protected]

pragma solidity ^0.8.4;

interface ICreatorToken {
    event TransferValidatorUpdated(address oldValidator, address newValidator);

    function getTransferValidator() external view returns (ICreatorTokenTransferValidator);
    function getSecurityPolicy() external view returns (CollectionSecurityPolicy memory);
    function getWhitelistedOperators() external view returns (address[] memory);
    function getPermittedContractReceivers() external view returns (address[] memory);
    function isOperatorWhitelisted(address operator) external view returns (bool);
    function isContractReceiverPermitted(address receiver) external view returns (bool);
    function isTransferAllowed(address caller, address from, address to) external view returns (bool);
}


// File @limitbreak/creator-token-contracts/contracts/utils/[email protected]

pragma solidity ^0.8.4;

/**
 * @title TransferValidation
 * @author Limit Break, Inc.
 * @notice A mix-in that can be combined with ERC-721 contracts to provide more granular hooks.
 * Openzeppelin's ERC721 contract only provides hooks for before and after transfer.  This allows
 * developers to validate or customize transfers within the context of a mint, a burn, or a transfer.
 */
abstract contract TransferValidation is Context {
    
    error ShouldNotMintToBurnAddress();

    /// @dev Inheriting contracts should call this function in the _beforeTokenTransfer function to get more granular hooks.
    function _validateBeforeTransfer(address from, address to, uint256 tokenId) internal virtual {
        bool fromZeroAddress = from == address(0);
        bool toZeroAddress = to == address(0);

        if(fromZeroAddress && toZeroAddress) {
            revert ShouldNotMintToBurnAddress();
        } else if(fromZeroAddress) {
            _preValidateMint(_msgSender(), to, tokenId, msg.value);
        } else if(toZeroAddress) {
            _preValidateBurn(_msgSender(), from, tokenId, msg.value);
        } else {
            _preValidateTransfer(_msgSender(), from, to, tokenId, msg.value);
        }
    }

    /// @dev Inheriting contracts should call this function in the _afterTokenTransfer function to get more granular hooks.
    function _validateAfterTransfer(address from, address to, uint256 tokenId) internal virtual {
        bool fromZeroAddress = from == address(0);
        bool toZeroAddress = to == address(0);

        if(fromZeroAddress && toZeroAddress) {
            revert ShouldNotMintToBurnAddress();
        } else if(fromZeroAddress) {
            _postValidateMint(_msgSender(), to, tokenId, msg.value);
        } else if(toZeroAddress) {
            _postValidateBurn(_msgSender(), from, tokenId, msg.value);
        } else {
            _postValidateTransfer(_msgSender(), from, to, tokenId, msg.value);
        }
    }

    /// @dev Optional validation hook that fires before a mint
    function _preValidateMint(address caller, address to, uint256 tokenId, uint256 value) internal virtual {}

    /// @dev Optional validation hook that fires after a mint
    function _postValidateMint(address caller, address to, uint256 tokenId, uint256 value) internal virtual {}

    /// @dev Optional validation hook that fires before a burn
    function _preValidateBurn(address caller, address from, uint256 tokenId, uint256 value) internal virtual {}

    /// @dev Optional validation hook that fires after a burn
    function _postValidateBurn(address caller, address from, uint256 tokenId, uint256 value) internal virtual {}

    /// @dev Optional validation hook that fires before a transfer
    function _preValidateTransfer(address caller, address from, address to, uint256 tokenId, uint256 value) internal virtual {}

    /// @dev Optional validation hook that fires after a transfer
    function _postValidateTransfer(address caller, address from, address to, uint256 tokenId, uint256 value) internal virtual {}
}


// File @openzeppelin/contracts/interfaces/[email protected]

// OpenZeppelin Contracts v4.4.1 (interfaces/IERC165.sol)

pragma solidity ^0.8.0;


// File @limitbreak/creator-token-contracts/contracts/utils/[email protected]

pragma solidity ^0.8.4;





/**
 * @title CreatorTokenBase
 * @author Limit Break, Inc.
 * @notice CreatorTokenBase is an abstract contract that provides basic functionality for managing token 
 * transfer policies through an implementation of ICreatorTokenTransferValidator. This contract is intended to be used
 * as a base for creator-specific token contracts, enabling customizable transfer restrictions and security policies.
 *
 * <h4>Features:</h4>
 * <ul>Ownable: This contract can have an owner who can set and update the transfer validator.</ul>
 * <ul>TransferValidation: Implements the basic token transfer validation interface.</ul>
 * <ul>ICreatorToken: Implements the interface for creator tokens, providing view functions for token security policies.</ul>
 *
 * <h4>Benefits:</h4>
 * <ul>Provides a flexible and modular way to implement custom token transfer restrictions and security policies.</ul>
 * <ul>Allows creators to enforce policies such as whitelisted operators and permitted contract receivers.</ul>
 * <ul>Can be easily integrated into other token contracts as a base contract.</ul>
 *
 * <h4>Intended Usage:</h4>
 * <ul>Use as a base contract for creator token implementations that require advanced transfer restrictions and 
 *   security policies.</ul>
 * <ul>Set and update the ICreatorTokenTransferValidator implementation contract to enforce desired policies for the 
 *   creator token.</ul>
 */
abstract contract CreatorTokenBase is OwnablePermissions, TransferValidation, ICreatorToken {
    
    error CreatorTokenBase__InvalidTransferValidatorContract();
    error CreatorTokenBase__SetTransferValidatorFirst();

    address public constant DEFAULT_TRANSFER_VALIDATOR = address(0x0000721C310194CcfC01E523fc93C9cCcFa2A0Ac);
    TransferSecurityLevels public constant DEFAULT_TRANSFER_SECURITY_LEVEL = TransferSecurityLevels.One;
    uint120 public constant DEFAULT_OPERATOR_WHITELIST_ID = uint120(1);

    ICreatorTokenTransferValidator private transferValidator;

    /**
     * @notice Allows the contract owner to set the transfer validator to the official validator contract
     *         and set the security policy to the recommended default settings.
     * @dev    May be overridden to change the default behavior of an individual collection.
     */
    function setToDefaultSecurityPolicy() public virtual {
        _requireCallerIsContractOwner();
        setTransferValidator(DEFAULT_TRANSFER_VALIDATOR);
        ICreatorTokenTransferValidator(DEFAULT_TRANSFER_VALIDATOR).setTransferSecurityLevelOfCollection(address(this), DEFAULT_TRANSFER_SECURITY_LEVEL);
        ICreatorTokenTransferValidator(DEFAULT_TRANSFER_VALIDATOR).setOperatorWhitelistOfCollection(address(this), DEFAULT_OPERATOR_WHITELIST_ID);
    }

    /**
     * @notice Allows the contract owner to set the transfer validator to a custom validator contract
     *         and set the security policy to their own custom settings.
     */
    function setToCustomValidatorAndSecurityPolicy(
        address validator, 
        TransferSecurityLevels level, 
        uint120 operatorWhitelistId, 
        uint120 permittedContractReceiversAllowlistId) public {
        _requireCallerIsContractOwner();

        setTransferValidator(validator);

        ICreatorTokenTransferValidator(validator).
            setTransferSecurityLevelOfCollection(address(this), level);

        ICreatorTokenTransferValidator(validator).
            setOperatorWhitelistOfCollection(address(this), operatorWhitelistId);

        ICreatorTokenTransferValidator(validator).
            setPermittedContractReceiverAllowlistOfCollection(address(this), permittedContractReceiversAllowlistId);
    }

    /**
     * @notice Allows the contract owner to set the security policy to their own custom settings.
     * @dev    Reverts if the transfer validator has not been set.
     */
    function setToCustomSecurityPolicy(
        TransferSecurityLevels level, 
        uint120 operatorWhitelistId, 
        uint120 permittedContractReceiversAllowlistId) public {
        _requireCallerIsContractOwner();

        ICreatorTokenTransferValidator validator = getTransferValidator();
        if (address(validator) == address(0)) {
            revert CreatorTokenBase__SetTransferValidatorFirst();
        }

        validator.setTransferSecurityLevelOfCollection(address(this), level);
        validator.setOperatorWhitelistOfCollection(address(this), operatorWhitelistId);
        validator.setPermittedContractReceiverAllowlistOfCollection(address(this), permittedContractReceiversAllowlistId);
    }

    /**
     * @notice Sets the transfer validator for the token contract.
     *
     * @dev    Throws when provided validator contract is not the zero address and doesn't support 
     *         the ICreatorTokenTransferValidator interface. 
     * @dev    Throws when the caller is not the contract owner.
     *
     * @dev    <h4>Postconditions:</h4>
     *         1. The transferValidator address is updated.
     *         2. The `TransferValidatorUpdated` event is emitted.
     *
     * @param transferValidator_ The address of the transfer validator contract.
     */
    function setTransferValidator(address transferValidator_) public {
        _requireCallerIsContractOwner();

        bool isValidTransferValidator = false;

        if(transferValidator_.code.length > 0) {
            try IERC165(transferValidator_).supportsInterface(type(ICreatorTokenTransferValidator).interfaceId) 
                returns (bool supportsInterface) {
                isValidTransferValidator = supportsInterface;
            } catch {}
        }

        if(transferValidator_ != address(0) && !isValidTransferValidator) {
            revert CreatorTokenBase__InvalidTransferValidatorContract();
        }

        emit TransferValidatorUpdated(address(transferValidator), transferValidator_);

        transferValidator = ICreatorTokenTransferValidator(transferValidator_);
    }

    /**
     * @notice Returns the transfer validator contract address for this token contract.
     */
    function getTransferValidator() public view override returns (ICreatorTokenTransferValidator) {
        return transferValidator;
    }

    /**
     * @notice Returns the security policy for this token contract, which includes:
     *         Transfer security level, operator whitelist id, permitted contract receiver allowlist id.
     */
    function getSecurityPolicy() public view override returns (CollectionSecurityPolicy memory) {
        if (address(transferValidator) != address(0)) {
            return transferValidator.getCollectionSecurityPolicy(address(this));
        }

        return CollectionSecurityPolicy({
            transferSecurityLevel: TransferSecurityLevels.Zero,
            operatorWhitelistId: 0,
            permittedContractReceiversId: 0
        });
    }

    /**
     * @notice Returns the list of all whitelisted operators for this token contract.
     * @dev    This can be an expensive call and should only be used in view-only functions.
     */
    function getWhitelistedOperators() public view override returns (address[] memory) {
        if (address(transferValidator) != address(0)) {
            return transferValidator.getWhitelistedOperators(
                transferValidator.getCollectionSecurityPolicy(address(this)).operatorWhitelistId);
        }

        return new address[](0);
    }

    /**
     * @notice Returns the list of permitted contract receivers for this token contract.
     * @dev    This can be an expensive call and should only be used in view-only functions.
     */
    function getPermittedContractReceivers() public view override returns (address[] memory) {
        if (address(transferValidator) != address(0)) {
            return transferValidator.getPermittedContractReceivers(
                transferValidator.getCollectionSecurityPolicy(address(this)).permittedContractReceiversId);
        }

        return new address[](0);
    }

    /**
     * @notice Checks if an operator is whitelisted for this token contract.
     * @param operator The address of the operator to check.
     */
    function isOperatorWhitelisted(address operator) public view override returns (bool) {
        if (address(transferValidator) != address(0)) {
            return transferValidator.isOperatorWhitelisted(
                transferValidator.getCollectionSecurityPolicy(address(this)).operatorWhitelistId, operator);
        }

        return false;
    }

    /**
     * @notice Checks if a contract receiver is permitted for this token contract.
     * @param receiver The address of the receiver to check.
     */
    function isContractReceiverPermitted(address receiver) public view override returns (bool) {
        if (address(transferValidator) != address(0)) {
            return transferValidator.isContractReceiverPermitted(
                transferValidator.getCollectionSecurityPolicy(address(this)).permittedContractReceiversId, receiver);
        }

        return false;
    }

    /**
     * @notice Determines if a transfer is allowed based on the token contract's security policy.  Use this function
     *         to simulate whether or not a transfer made by the specified `caller` from the `from` address to the `to`
     *         address would be allowed by this token's security policy.
     *
     * @notice This function only checks the security policy restrictions and does not check whether token ownership
     *         or approvals are in place. 
     *
     * @param caller The address of the simulated caller.
     * @param from   The address of the sender.
     * @param to     The address of the receiver.
     * @return       True if the transfer is allowed, false otherwise.
     */
    function isTransferAllowed(address caller, address from, address to) public view override returns (bool) {
        if (address(transferValidator) != address(0)) {
            try transferValidator.applyCollectionTransferPolicy(caller, from, to) {
                return true;
            } catch {
                return false;
            }
        }
        return true;
    }

    /**
     * @dev Pre-validates a token transfer, reverting if the transfer is not allowed by this token's security policy.
     *      Inheriting contracts are responsible for overriding the _beforeTokenTransfer function, or its equivalent
     *      and calling _validateBeforeTransfer so that checks can be properly applied during token transfers.
     *
     * @dev Throws when the transfer doesn't comply with the collection's transfer policy, if the transferValidator is
     *      set to a non-zero address.
     *
     * @param caller  The address of the caller.
     * @param from    The address of the sender.
     * @param to      The address of the receiver.
     */
    function _preValidateTransfer(
        address caller, 
        address from, 
        address to, 
        uint256 /*tokenId*/, 
        uint256 /*value*/) internal virtual override {
        if (address(transferValidator) != address(0)) {
            transferValidator.applyCollectionTransferPolicy(caller, from, to);
        }
    }
}


// File @openzeppelin/contracts/token/ERC721/[email protected]

// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC721/IERC721.sol)

pragma solidity ^0.8.0;

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external;

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721
     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must
     * understand this adds an external call which potentially creates a reentrancy vulnerability.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);
}


// File @openzeppelin/contracts/token/ERC721/[email protected]

// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)

pragma solidity ^0.8.0;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}


// File @openzeppelin/contracts/token/ERC721/extensions/[email protected]

// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)

pragma solidity ^0.8.0;

/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {
    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}


// File @openzeppelin/contracts/utils/[email protected]

// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}


// File @openzeppelin/contracts/utils/math/[email protected]

// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1);

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator,
        Rounding rounding
    ) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10**64) {
                value /= 10**64;
                result += 64;
            }
            if (value >= 10**32) {
                value /= 10**32;
                result += 32;
            }
            if (value >= 10**16) {
                value /= 10**16;
                result += 16;
            }
            if (value >= 10**8) {
                value /= 10**8;
                result += 8;
            }
            if (value >= 10**4) {
                value /= 10**4;
                result += 4;
            }
            if (value >= 10**2) {
                value /= 10**2;
                result += 2;
            }
            if (value >= 10**1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(valu...

// [truncated — 172091 bytes total]